Epson AcuLaser C4200DTNPC6 User Manual

							
Safety Instructions21
ENERGY STAR® compliance
As an ENERGY STAR® Partner, Epson has 
determined that this product meets the ENERGY 
STAR 
® guidelines for energy efficiency.
The International ENERGY STAR
® Office Equipment Program is 
a voluntary partnership with the computer and office equipment 
industry to promote the introduction of energy-efficient personal 
computers, monitors, printers, fax machines, copiers, scanners, 
and multifunction devices, and in an effort to reduce air pollution 
caused by power generation. Their standards and logos are 
uniform among participating nations.
Safety Information
Power cord
c
Caution:
Be sure the AC power cord meets the relevant local safety 
standards.
Use only the power cord that com es with this product. Use of the 
another cord may result in fire or electric shock.
This product’s power cord is for use with this product only. Use 
with other equipment may result in fire or electric shock.
 
						

							
22Safety Instructions
Laser safety labels
w
Warning:
The performance of procedures and adjustments other than those 
specified in the printer’s docume ntation may result in hazardous 
radiation exposure.
Your printer is a Class 1 laser product as defined in the IEC60825 
specifications. The label shown is  attached to the back of the 
printer in countries where required.
Internal laser radiation
This is a Class III b Laser Diode Assembly that has an invisible 
laser beam. The printer head unit is NOT A SERVICE ITEM, 
therefore, the printer head unit should not be opened under any 
circumstances. An additional laser warning label is affixed to the 
inside of the printer.
CDRH regulations
For information about the Center for Devices and Radiological 
Health of the U.S. Food and Drug Administration, see Standard 
and approvals on page 417. Max. Average Radiation Power: 10 mW at laser aperture
Wavelength: 775 to 799 nm
 
						

							
Safety Instructions23
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the 
printing process. Ozone is produced only when the printer is 
printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per 
million (ppm) expressed as an average time-weighted 
concentration over an eight (8) hour period.
The Epson laser printer generates less than 0.1 ppm for eight (8) 
hours of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the 
following conditions: 
❏Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location 
The printer should be located so that the exhaust gases and heat 
generated are:
❏Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
 
						

							
24Safety Instructions
Power On/Off Cautions
New
 :with
 LCD panelDo not turn off the printer:
❏ After turning on the printer, wait until  Ready appears on the 
LCD panel.
❏ While the  Ready light is flashing.
❏ While the  Data light is on or flashing.
❏ While printing.
 
						

							
Getting to Know Your Printer25
1
1
1
1
1
1
1
1
1
1
1
1
Chapter 1 
Getting to Know Your Printer
Where to Find Information
New :delete u
nnecessary i
nformation.
T his p
art
 is
 only u
sed
 for t
he HTML
 manual.Setup Guide
Provides you with information on assembling the printer and 
installing the printer software.
User’s Guide (this manual)
Provides you with detailed information on the printer’s functions, 
optional products, maintenance, troubleshooting, and technical 
specifications.
Network Guide
Provides network administrators with information on both the 
printer driver and network settings.You need to install this guide 
from the Network CD -ROM  to your comp uter s hard  di sk b efore 
referring it.
Paper Jam Guide
Provides you with solutions for paper jam problems about your 
printer you may need to refer to on a regular basis. We 
recommend printing this guide and keeping it near the printer.
Online Help for printer software
Click  Help for detailed information and instructions on the 
printer software that controls your printer. Online help is 
automatically installed when you install the printer software.
 
						

							
26Getting to Know Your Printer
Printer Parts
New :quote
 t
he
 information
 from
 the s
imilar
 product
Front view
a. control panel
b. cover B
c. top cover
d. output tray
e. latch on cover B
f. cover A
g. power switch
h. latch on cover A
i. standard lower paper cassette
j. expansion tray
k. MP tray (Multi-Purpose tray)
e
k
j
i hg
a
c
d
f
b
 
						

							
Getting to Know Your Printer27
1
1
1
1
1
1
1
1
1
1
1
1
Rear view
a. stopper
b. Ethernet interface connector
c. AC inlet
d. USB interface connector
e. parallel interface connector
f. Type B interface card slot cover
ab
c
f
d
e
 
						

							
28Getting to Know Your Printer
Inside the printer
a. transfer unit
b. fuser unit
c. photoconductor unit
d. toner cartridge
e. cover D
ab
c
d
e
 
						

							
Getting to Know Your Printer29
1
1
1
1
1
1
1
1
1
1
1
1
Control panel
New
 :Emulation/ w
ith
 control
 panel
 and
 LCD
a. LCD panel Displays printer status messages and 
control panel menu settings.
b.
c.
d.
e. Back
 button
Up  button
Enter  button
Down  button Use these buttons to access the control 
panel menus, where you can make printer 
settings and check the status of 
consumable products. For instructions on 
how to use these buttons, see Using the 
Control Panel Menus on page 214.
f. Ready  light
(Green) On when the printer is ready, indicating 
that the printer is ready to receive and 
print data.
Off when the printer is not ready.
g. Error light
(Red) On or flashes when an error has occurred.
ceb
i
jh
g f
da
 
						

							
30Getting to Know Your Printer
Options and Consumable Products
New
 :Option/Consumable
Options
You can add to your printer’s capabilities by installing any of the 
following options.
❏ 550-sheet Paper Cassette Unit (C12C802251)
This unit increases paper feeding capacity up to 550 sheets of 
paper.
❏ 1100-sheet Paper Cassette Unit (C12C802261)
This unit holds two paper cassettes, and increases paper 
feeding capacity up to 1100 sheets of paper.
h.
Start/Stop  
button When the printer is printing, pressing this 
button stops the printing.
When the error light is flashing, pressing 
this button clears the error and switches 
the printer to ready status.
i. Data  light
(Yellow) On when print data is stored in the print 
buffer (the section of printer memory 
reserved for receiving data) but not yet 
printed.
Flashes when the printer is processing 
data.
Off when no data remains in the print 
buffer.
j. Cancel Job  
button Press once to cancel the current print job. 
Press and hold for more than two seconds 
to delete all jobs from the printer memory.