Epson AcuLaser C4200DNPC5 User Manual

Using the Printer Software with Windows71
4
4
4
4
4
4
4
4
4
4
4
4
4. Specify the Binding Margin for the front and back sides of the paper, then select whether the front or back side of the paper 
is to be printed as the Start Page.
5. When printing for binding as a booklet, select the  Binding 
Method  check box and make appropriate settings. For details 
about each setting, see online help.
6. Click  OK to apply the settings and return to the  Basic Settings 
tab.
 

72Using the Printer Software with Windows
Ordering Consumables
To order consumables online, click the Order Online button on 
the  Basic Settings  tab. See Order Online on page 118 for details.
 

Using the Printer Software with Windows73
4
4
4
4
4
4
4
4
4
4
4
4
Note:
The amount of toners remaining and the expected service life of the 
photoconductor are displayed on the Basic Settings tab when EPSON 
Status Monitor is installed. You ca n set the interval of the remaining 
consumables on the Consumables Info Settings dialog box that appears 
by clicking the  Consumables Info Settings  button on the Optional 
Settings  tab. 
Resizing printouts
You can have your document enlarged or reduced during...

74Using the Printer Software with Windows
2. Select the 
Zoom Options  check box, then select the desired 
paper size from the Output Paper drop-down list. The page 
will be printed to fit on the paper you have selected.
3. Select  Upper Left  (to print reduced page image at upper left 
corner of the paper) or  Center (to print reduced page image 
with centering) for Location setting.
4. Click  OK to apply the settings.
Resizing pages by a specified percentage
1. Click the  Advanced Layout  tab.
2....

Using the Printer Software with Windows75
4
4
4
4
4
4
4
4
4
4
4
4
3. Select the Zoom To check box, then specify the magnification 
percentage in the box.
Note:
The percentage can be set between 50% and 200% in 1% 
increments.
4. Click  OK to apply the settings.
If necessary, select the paper size to be printed from the Output 
Paper drop-down list.
 

76Using the Printer Software with Windows
Modifying the print layout
Your printer can print either two or four pages onto a single page 
and specifies the printing order, automatically resizing each page 
to fit the specified paper size. You can also choose to print 
documents surrounded by a frame.
1. Click the Advanced Layout  tab.
2. Select the  Print Layout check box and the number of pages 
you want to print on one sheet of paper. Then click  More 
Settings . The Print Layout Settings dialog box...

Using the Printer Software with Windows77
4
4
4
4
4
4
4
4
4
4
4
4
3.  Select the Page Order in which the pages are printed on each sheet.
4. Select the  Print the Frame  check box when you want to print 
the pages surrounded by a frame.
Note:
The Page Order choices depend on the number of pages selected 
above, and the paper orientation (Portrait or Landscape) selected on 
the  Basic Settings  tab.
5. Click  OK to apply the settings and return to the  Advanced 
Layout  tab.
 

78Using the Printer Software with Windows
Using a watermark
Follow the steps below to use a watermark on your document. On 
the Advanced Layout  tab or Watermark dialog box, you can 
select from a list of predefined watermarks, or you can make an 
original watermark with text or a bitmap. The Watermark dialog 
box also allows you to make a variety of detailed watermark 
settings. For example, you can select the size, intensity, and 
position of your watermark.
1. Click the  Advanced Layout  tab.
2....

Using the Printer Software with Windows79
4
4
4
4
4
4
4
4
4
4
4
4
3. Select the color from the Color drop-down list, then adjust the image intensity of the watermark with the  Intensity slider bar.
4. Select  Front (to print the watermark in the foreground of the 
document) or  Back (to print the watermark in the 
background of the document) for the Position setting.
5. Select the location on the page where you want to print the  watermark from the Location drop-down list.
6. Adjust the  X (horizontal)...

80Using the Printer Software with Windows
1. Click the 
Advanced Layout  tab.
2. Click  New/Delete . The User Defined Watermarks dialog box 
appears.
Note:
The User Defined Watermarks dialog box also appears by clicking 
New/Delete  in the Watermark dialog box.
3. Select  Text or BMP  and type a name for the new watermark 
in the Name box.
Note:
This screen appears when you select  Text.
4. If you select  Text, type the watermark text in the  Text box. If 
you select  BMP, click  Browse ,  s e l e c t...