Epson AcuLaser C4200DNPC5 User Manual

Using the Control Panel221
7
7
7
7
7
7
7
7
7
7
7
7
Emulation Menu
New :Emulation o
nly/ c
onfirm t
he
 product
 s
pecificationUse this menu to select the printer emulation mode. You can 
specify different emulations for each interface; in other words, for 
each computer you connect the printer to. Since each emulation 
mode has its own specific options, make settings in the ESC P2, 
FX, or I239X menu, as necessary. The settings you can choose from 
are the same for every interface.
*1 Available only...

222Using the Control Panel
*1 Custom-size paper is 88.9 × 139.7 mm at the minimum and 220  × 355.6 mm 
at the maximum, but EPSON recommends printing on paper that is not wider 
than 207.9 mm.
*2Not available in optional P5C mode.
Page Size
Specifies the paper size.
Wide A4
Selecting  On decreases the left and right margins from 4 mm to 
3.4 mm.
Orientation
Specifies whether the page is printed in portrait or landscape 
orientation.
Resolution
Item Settings (default in bold)
Page Size A4, B5, A5, LT,...

Using the Control Panel223
7
7
7
7
7
7
7
7
7
7
7
7
Specifies the printing resolution.
RITech
Turning RITech on produces smoother and crisper lines, text, and 
graphics.
Toner Save
When this setting is selected, the printer saves toner by 
substituting a gray shade for the black inside of characters. The 
characters are outlined in full black on the right and lower edges.
Image Optimum
When this mode is on, the quality of graphics is reduced. It 
reduces the amount of graphics data when the data reaches...

224Using the Control Panel
Adjusts the vertical printing position on the back of the paper 
when printing on both sides. Use 
this if the printout on the back 
is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper 
when printing on both sides. Use  this if the printout on the back 
is not where you expected.
Setup Menu
N ew :vary  according
 to
 the p
roduct
 /quote
 t
he
 information
 from
 the s
imilar
 productThis menu allows you to make various basic...

Using the Control Panel225
7
7
7
7
7
7
7
7
7
7
7
7
*1Available only when the optional paper cassette unit is installed.
*2Available only when you use A4, A5, B5, LT, LGL, EXE, or GLG size paper.
*3Available only for ESC/Page, ESC/P2, FX, or I239X mode.
*4Not available when an optional P5C module is installed.
Lang
Item Settings (default in bold)
LangEnglish, Français, Deutsch, Italiano, 
ESPAÑOL, SVENSKA, Dansk, Nederlands, 
SUOMI, Português, Norsk,  ,  , 
Time to Sleep 5, 15, 30,  60, 120, 180, 240...

226Using the Control Panel
Specifies the language displayed on the LCD panel and that 
printed on the status sheet.
Time to Sleep
Specifies the length of time until the printer enters the sleep mode 
if there are no button operations.
Time Out
Specifies the length of the time, in seconds, before a time out when 
interfaces are being switched automatically. The time before a 
time out occurs is the length of time from the point when no data 
is being received from an interface until the point of...

Using the Control Panel227
7
7
7
7
7
7
7
7
7
7
7
7
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 
999.
Duplex
Turns duplex printing on or off.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether printing starts from the front or back of the 
page.
Paper Type
Specifies the type of paper to be used for printing. The printer 
adjusts the printing speed according to this setting. The printing...

228Using the Control Panel
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in 
the Time Out setting is reached. The default is 
Off, which means 
paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select  On. When you turn 
this item on, the printer keeps printing even if the image size 
exceeds the printable area for the specified paper size. This may 
cause smudges because of the toner that is not transferred...

Using the Control Panel229
7
7
7
7
7
7
7
7
7
7
7
7
LCD Contrast
Adjusts the contrast of the LCD panel. Use the uUp  and  dDown  
buttons to set the contrast between  0 (lowest contrast) and  15 
(highest contrast.)
Quick Print Job Menu
This menu allows you to print or delete print jobs that were stored 
in the printer’s Hard Disk Drive using the Quick Print Job feature 
(Re-Print Job, Verify Job, Stored Job) of the printer driver’s 
Reserve Job function. For instructions on using this menu, see 
Using...

230Using the Control Panel
Adjusts the registration position of the color cyan relative to black.
To adjust the registration, select
 Color Regist Sheet on the 
control panel’s  Information Menu  to print a color registration 
sheet. Then use the Cyan Regist setting to select the number that 
corresponds to the cyan and black line segments most closely 
aligned. See Checking Color Registration on page 268 for more 
detailed instructions.
Magenta Regist
Adjusts the registration position of the color...