Epson AcuLaser C2800N User Manual

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows91
After the last page is output, the Ready (green) light on the printer turns on.
The current job is canceled.
Note:
You can also cancel the current print job that is sent from your computer, by pressing the +Cancel Job 
button on the printer’s control panel. When canceling the print job, be careful not to cancel print jobs sent by 
other users.
Uninstalling the Printer Software
When you wish to reinstall or upgrade the printer...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows92
4. For Windows Vista, select EPSON Printer Software, then click Uninstall/Change.
For Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64, select EPSON Printer 
Software, then click Change/Remove.
5. Click the Printer Model tab, select your printer’s icon.
6. Click the Utility tab, and confirm that the check box for the printer software you want to 
uninstall is selected.
 

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows93
Note:
If you wish to uninstall only EPSON Status Monitor, select the EPSON Status Monitor check box.
7. To uninstall, click OK.
Note:
You can uninstall EPSON Network Utility. When the utility is uninstalled, you cannot display the 
printer status from EPSON Status Monitor of other printers.
8. Follow the on-screen instructions.
Sharing the Printer on a Network
Sharing the printer
This section describes how to share the printer on...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows94
❏The print server and clients should be set on the same network system, and they should be under the same 
network management beforehand.
Using an additional driver
When the print server’s OS is Windows Vista, Vista x64, XP, XP x64, 2000, Server 2003, or Server 
2003 x64, you can install the additional drivers on the server. The additional drivers are for client 
computers that have different OS from the server.
Follow the steps...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows95
3. For a Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64 print server, select 
Share this printer, then type the name in the Share name box.
Note:
Do not use spaces or hyphens for the Share name, or an error may occur.
For a Windows 2000 print server, select Shared as, then type the name in the Share Name box.
4. Select the additional drivers.
Note:
If the computers of the server and clients use the same OS,...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows96
On the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server
Click Additional Drivers.
Select Windows being used for clients, then click OK.
 

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows97
*The additional driver for Windows XP x64 and Server 2003 x64 can be used on Windows XP Service Pack 2, Windows 
2003 Service Pack 1, or later.
Note:
❏You do not have to install the additional drivers noted below, because these drivers are preinstalled. 
Intel Windows 2000 (for Windows 2000)
Intel Windows 2000 or XP (for Windows XP)
x86 Windows 2000, Windows XP and Windows Server 2003 (for Windows Server 2003)
x64 Windows XP and...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows98
Setting up clients
This section describes how to install the printer driver by accessing the shared printer on a 
network.
Note:
❏To share the printer on a Windows network, you need to set the print server. For details, see “Using an 
additional driver” on page 94.
❏This section describes how to access the shared printer on a standard network system using the server 
(Microsoft workgroup). If you cannot access the shared printer...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows99
2. For Windows 2000, double-click the Add Printer icon, then click Next.
For Windows XP or XP x64 click Add a printer in the Printer Tasks menu.
For Windows Vista or Vista x64, click Add a printer in the menu bar.
3. For Windows 2000, select Network printer, then click Next.
For Windows XP or XP x64, select A network printer, or a printer attached to another 
computer, then click Next.
For Windows Vista or Vista x64, click Add a...

AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows100
For Windows XP or XP x64, select Browse for a printer.
For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box that 
appears, then click Next.
5. For Windows XP, XP x64, 2000, Server 2003, Server 2003 x64, click the icon of the computer or 
server that is connected to the shared printer, and the name of the shared printer, then click 
Next.
Note for Windows Vista users:
When the dialog box to...