Epson AcuLaser C2600DN User Manual

							Using the Printer Software with Windows151
4
4
4
4
4
4
4
4
4
4
4
4
❏If the additional driver for Windows NT 4.0 is not installed in 
the Windows XP, 2000, or Server 2003 print server, or the print 
server’s OS is Windows Me or 98, go to  Installing the printer 
driver from the CD-ROM on page 151.
5. Select whether to use the printer as the default printer or not, 
then click Next.
6. Click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the 
clients when setting the network system as follows:
❏The additional drivers are not installed in the Windows XP, 
2000, NT 4.0, or Server 2003 print server.
❏The print server’s OS is Windows Me or 98 and the client’s OS 
is Windows XP, 2000, or NT 4.0.
The on-screen displays on the following pages may differ 
depending on the version of Windows OS.
Note:
❏When installing in Windows XP, 2000, or NT 4.0 clients, you must 
access Windows XP, 2000, or NT 4.0 as Administrator.
❏If the additional drivers are installed or the computers of the server 
and clients use the same OS, you do not have to install the printer 
drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click 
OK, then follow the on-screen instructions to install the 
printer driver from the CD-ROM.
 
						

							152Using the Printer Software with Windows 2. Insert the CD-ROM, type the appropriate drive and folder 
names in which the printer driver for clients is located, then 
click OK.
When installing drivers in Windows XP, 2000, or Server 2003, 
“Digital Signature is not found.” may appear. Click Yes (for 
Windows 2000) or Continue Anyway (for Windows XP or 
Server 2003) and continue installing.
The folder name differs depending on the OS being used.
3. Select the name of the printer, click OK, then follow the 
on-screen instructions.
Client’s OS Folder Name
Windows Me or 98 \\WIN9X
Windows 2000 or XP \\WINXP_2K
Windows NT 4.0 \\WINNT40
 
						

							Using the Printer Software with Macintosh153
5
5
5
5
5
5
5
5
5
5
5
5
Chapter 5 
Using the Printer Software with Macintosh
About the Printer Software
The printer software contains a printer driver and EPSON Status 
Monitor 3. The printer driver lets you choose from a wide variety 
of settings to get the best results from your printer.
Use the following procedures to access the EPSON Status 
Monitor 3.
For Mac OS X users, open the Print dialog box and select Printer 
Settings from the drop-down list. Then click your printer’s icon 
on the Utility menu.
For Mac OS 9 users, select the EPSON Status Monitor 3 alias from 
the Apple menu, then click your printer’s icon.
EPSON Status Monitor 3 lets you check the status of your printer. 
See  Monitoring Your Printer using EPSON Status Monitor 3 on 
page 184 for more information.
Accessing the printer driver
To control your printer and change its settings, use the printer 
driver. The printer driver allows you to easily make all the print 
settings, including paper source, paper size, and orientation.
Mac OS X
To access the printer driver, register your printer in Printer Setup 
Utility (for Mac OS X 10.3) or Print Center (for Mac OS X 10.2 or 
below), click Print on the File menu of any application, then select 
your printer.
 
						

							154Using the Printer Software with Macintosh
Mac OS 9
To access the printer driver, open the appropriate dialog box, 
select Chooser from the Apple menu, then click your printer’s 
icon.
Opening the dialog boxes from the application
❏To open the Paper Setting dialog box, select Page Setup from 
the File menu on any application.
❏To open the Basic Settings dialog box, select Print from the File 
menu on any application.
Note:
The printer driver’s online help provides details on printer driver 
settings.
Making Changes to Printer Settings
Making the print quality settings
You can change the print quality of printouts through settings in 
the printer driver. With the printer driver, you can make the print 
settings by choosing from a list of predefined settings, or 
customizing the settings.
Choosing the print quality by using the Automatic setting
You can change the print quality of printouts to favor speed or 
detail. There are two levels of print output, Fast and Fine. Fine 
provides high quality, precise printing, but requires more 
memory and slows the printing speed.
 
						

							Using the Printer Software with Macintosh155
5
5
5
5
5
5
5
5
5
5
5
5
When Automatic is selected on the Basic Settings dialog box, the 
printer driver takes care of all detailed settings according to the 
color setting you select. Color and resolution are the only settings 
you need to make. You can change other settings such as paper 
size or orientation in most applications.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the 
Basic settings tab.
3. Click Automatic, then choose the resolution from the 
Resolution drop-down list.
For Mac OS 9 users
1. Open the Basic Settings dialog box.
 
						

							156Using the Printer Software with Macintosh 2. Click Automatic on Print Quality, then choose desired 
printing resolution from Fast or Fine with the slider bar.
Note:
If printing is unsuccessful or a memory-related error message 
appears, selecting a lower resolution may allow printing to proceed.
Using the predefined settings
The predefined settings are provided to help you optimize print 
settings for a particular kind of printout, such as presentation 
documents or images taken by a video or digital camera.
Follow the steps below to use the predefined settings.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the 
Basic settings tab.
 
						

							Using the Printer Software with Macintosh157
5
5
5
5
5
5
5
5
5
5
5
5
3. Select Advanced. You will find the predefined settings in 
the list on the right of Automatic.
4. Select the most appropriate setting from the list according to 
the type of document or image you want to print.
For Mac OS 9 users
1. Open the Basic Settings dialog box.
2. Select Advanced. You will find the predefined settings in 
the list on the right of Automatic.
Note:
For details about the RITech function, see the online help.
3. Select the most appropriate setting from the list according to 
the type of document or image you want to print.
 
						

							158Using the Printer Software with Macintosh When you choose a predefined setting, other settings such as 
Printing Mode, Resolution, Screen, and Color Management are 
set automatically. Changes are shown in the Summary 
drop-down list in the Print dialog box (for Mac OS X), or in the 
current settings list on the left of the Basic Settings dialog box (for 
Mac OS 9).
This printer driver provides the following predefined settings:
Automatic (Standard)
Suitable for regular printing, especially photos.
Text/Graph
Suitable for printing documents that include text and graphs, 
such as presentation documents.
Graphic/CAD
Suitable for printing graphs and charts.
Photo
Suitable for printing photos.
PhotoEnhance4
Suitable for printing images captured using the video input, a 
digital camera, or scanner. EPSON PhotoEnhance4 automatically 
adjusts the contrast, saturation, and brightness of the original 
image data to produce sharper, more vivid color printouts. This 
setting does not affect your original image data.
Note:
This function is not available with Mac OS X.
ColorSync
 
						

							Using the Printer Software with Macintosh159
5
5
5
5
5
5
5
5
5
5
5
5
Automatically adjusts printout colors to match colors on your 
screen.
Automatic (High Quality)
Suitable for regular printing that gives priority to high-quality 
printing.
Advanced Text/Graph
Suitable for printing high-quality presentation documents that 
include text and graphs.
Advanced Graphic/CAD
Suitable for printing high-quality graphs, charts, and photos.
Advanced Photo
Suitable for printing high-quality scanned photos and 
digitally-captured images.
Customizing print settings
Your printer provides for customized print settings if you need 
more control over the printout, want to make the most detailed 
settings available, or just want to experiment.
Follow the steps below to customize your print settings.
1. Open the Basic Settings dialog box.
 
						

							160Using the Printer Software with Macintosh 2. Click Advanced, then click More Settings. The following 
dialog box appears.
3. Choose Color or Black as the Color setting.
4. Choose desired printing resolution from Fast or Fine.
Note:
When making the other settings, click the   button for details on 
each setting.
5. Click OK to apply the settings and return to the Basic Settings 
dialog box.
Note:
For details on each setting, see the online help.
Saving your settings
For Mac OS X users
Use the following procedures to save your custom settings.