Epson 8150i Multimedia Projector Technical Specifications

							EPSON PowerLite 8150i Projector
5/01 EPSON PowerLite 8150i Projector - 13 3. Pull the filter cover up and remove it. 
4. The filter is attached to the inside of the filter cover. It is 
recommended that you use a small vacuum cleaner designed 
for computers and other office equipment to clean the filter. 
If you don’t have one, use a dry, lint-free cloth. 
If the dirt is difficult to remove or the filter is torn, replace it.
5. Replace the filter cover when you’re done.
Replacing the Lamp
The projection lamp typically lasts for about 2000 hours of 
use. It is time to replace the lamp when:
❏The projected image gets darker or starts to deteriorate.
❏The lamp light is flashing red or orange. 
❏The message 
LAMP REPLACE appears on the screen when 
the projection lamp comes on (after about 1900 hours). To 
maintain the projector brightness and image quality, replace 
the lamp as soon as possible. 
Warning: Let the lamp cool before replacing it. Also, do not touch 
the glass portion of the lamp assembly. Touching the glass portion 
of the lamp can result in premature lamp failure.
1. Turn off the projector and unplug the power cable.
2. Allow the projector to cool down for at least an hour (if it 
has been on).
3. Turn the projector so you can see the lamp cover.4. Use a screwdriver to loosen the two retaining screws on the 
lamp cover. When the screws are loose, lift off the lamp 
cover. (You cannot remove these screws from the cover.) 
5. Use a screwdriver to loosen the three screws holding the 
lamp unit in place. (You cannot remove these screws 
completely.) Then lift up the handle and pull out the lamp 
unit. 
6. Gently insert the new lamp unit by lowering it into position. 
Make sure it’s inserted securely. Tighten the screws on the 
new lamp unit.
handle 
						

							EPSON PowerLite 8150i Projector
14 - EPSON PowerLite 8150i Projector 5/01 7. Replace the lamp cover and tighten the screws. (Make sure 
the lamp cover is securely fastened. The projector turns itself 
off if the lamp cover is open.)
8. Reset the lamp timer as described below.
Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the 
projector can keep track of how many hours it has been used. 
Follow these steps:
1. Press the 
Help button and hold it down for at least 5 
seconds. The Help menu will be displayed and then you will 
see a menu asking if you want to reset the lamp ON time.
2. Use the left arrow button (control panel) or press left on the 
Enter button (remote control) to select Yes. 
3. Press 
Enter to reset the timer.
Optional Accessories
EPSON provides the following optional accessories for the 
PowerLite 8150i: You can purchase these accessories from your dealer or by 
calling EPSON at (800) 873-7766; or visit the EPSON 
Store
SM at www.epsonstore.com (U.S. sales only). In Canada, 
please call (800) 873-7766 for dealer referral. 
To see our full line of multimedia projectors, please visit 
www.epson.com/mul_proj.
Related Documentation
CPD-11970 EPSON PowerLite 8150i Administrator’s 
Manual
CPD-11971 EPSON PowerLite 8150i User’s Guide
Service Manual TBD
Parts Price Lists PL-EMP8150ProductProduct 
number
Replacement lamp and air filter ELPLP11
Short throw zoom lens ELPLW01
Long throw zoom lens ELPLL02
Extra long throw zoom lens ELPLL03
Fixed short throw lens ELPLR01
Ceiling mount ELPMB31
Suspension adapter for ceiling mount ELPMBAST
Kensington security lock ELPSL01
Insta Theatre portable projection screens:
50-inch
60-inch
80-inch ELPSC06
ELPSC07
ELPSC08
Wireless microphone and two satellite speakers ELPCVS1
Auxiliary audio system ELPPAS1
Remote control receiver (plugs into projector to 
extend range of remote control)ELPST02
Remote control receiver kit (includes standard 
receiver and clip-on attachment for connecting 
directly to remote control)ELPST04
Digital video cables:
DVI to DVI, 10 feet (3 meters)
DVI to DFP, 10 feet (3 meters)ELPKC20
ELPKC21
VGA to 13W3 video cable (for connecting to 
certain high-end workstations)ELPKC06
VGA computer cables:
HD15/HD15 (1.8 meters)
HD15/HD15 (3.0 meters)ELPKC02
ELPKC09
Macintosh adapter set (includes monitor adapter 
and desktop adapter) ELPAP01
Communication cable set 
(for connecting a second computer; includes a 
Mac adapter set so you can connect a second 
Macintosh)ELPKC04
ProductProduct 
number