Entex SAG Pinball Instructions

							
 
 
 8 
 
 
 
Ô  Points for Handing  ..................................................................   9 
Ô  Special Precautions  ...............................................................   10 
Ô  Installation  ........................................................................\
......   12 
Ô  Outline Dimensions  ................................................................   13 
  Ô  Parts Identification ..................................................................   14 
Ô  Main Circuit Wiring  .................................................................   17 
Ô  Control Circuit Wiring  .............................................................   20 
Ô  Basic Operation ......................................................................   22 
Ô  Function of each mode ...........................................................   30 
Ô  Setting and Changing Functions  ............................................   31 
Ô  Functional Descriptions (Parameter Table) ............................   34 
Ô  Functional Descriptions (By Parameter )  ...............................   37 
Ô  To Effectively Use the Inverter (contents) ...............................   64 
Õ   Changing from Local Control to External Control ...............   65 
Õ   Changing and Setting the Maximum Output Frequency.....   66 
Õ   Boosting Torque at Low Speeds ........................................   67 
Õ   Supplementary Explanation for Multi-function Terminal 
      Input........................................................................\
............   68 
Õ   0V Stop Function ................................................................   73 
Õ   Resetting Fault Trips...........................................................   73 
Ô  Individual Details and Remedies for Fault Trips......................   74 
Ô  Troubleshooting (1) .................................................................   76 
Ô  Troubleshooting (2)  ................................................................   78 
Ô  Maintenance and Inspection ...................................................   79 
Ô  Specifications  ........................................................................\
.   83 
Contents  
						

							
 
 
9   
 
 Follow this manual and precautions when handling this unit. Incorrect handling 
could lead to inhibited operation or a drop operating life. In the worst case, the 
inverter could be damaged. 
 
Power supply  Use within +10%,  −15% of the tolerable input 
voltage range, and within ±5% of the tolerable input 
frequency range. 
Circuit 
breaker  Size a breaker from the selection table on 
(MCCB) page 19. 
Magnet contactor  A magnetic contactor is not required in normal 
(MC)  use. If installed, do not start or stop the inverter with  the magnet contactor. 
Power factor  
Connect this when the power factor must be  
improvement  improved. 
reactor  (Option for input side) 
 
Input noise filter  Connect this when noise to the peripheral devices  is a problem. (Option for input side) 
 
Inverter  The ambient temperature is a particularly important  factor for the installation site. 
  Make sure that the tolerable value is not exceeded. 
  (See page 10 to 12.) 
 
Thermal relay   The thermal relay built into the inverter is used to 
for open phase   protect against overloads. Use an open phase 
protection  protection thermal relay for open phase protection. 
 
 
Motor  3-phase induction motor 
Points for Handling 
Ｎ・Ｆ