Elmo Boxi T-350 Mobile Projector Instruction Manual

							 
 
41 
 
 
SETTING THE ECO MODE (remote control) 
Setting the ECO mode on the remote control. 
1. Press the ECO button on the remote control. 
The “ECO mode setting” menu will be displayed. 
 
 
 
 
 
 
 
2. Press the “ ” buttons of remote control. 
Select “ON” or “OFF” with the    
buttons on the remote control. 
 
 
 
 
 
Press the  button to execute the selection. 
 
 
Setting Description  
ON To activate the ECO mode.  
OFF To cancel the ECO mode. 
N o t e 
■ The “ECO mode setting” menu will be automatically closed after 3 
seconds of no operation.  
■ Setting the ECO mode can also be performed from the menu. 
Refer to “SETTING THE ECO MODE” (Page58F for details 
Remote control 
ECO mode setting menu          
						

							 
 
42 
 
 
3 MENU OPERATION 
Various configurations and adjustments to the projected image can be done from the 
menu. 
 
DISPLAYING THE MENU AND BASIC OPERATION 
 Displaying the main menu 
1. Press the MENU button. 
Press the MENU button on the 
remote control or on the control 
panel. 
 
The menu will be closed if the MENU 
button is pressed again. 
The menu will also be closed 
automatically after 30 seconds of no operation. 
 
 Operating the menus 
 
 
 
 
    
 
 
 
 
 
The selected item in the main menu will be marked in blue. 
If you open the selected item, a sub menu will be displayed and you can configure 
the details. 
The items that cannot be selected will be marked in dark grey. 
Main menu                                          Sub menu 
The selected item will be marked in blue. 
The non selectable 
items will be marked in 
dark grey. → 
Remote control Control panel      
						

							 
 
43 
 
 
Button Function 
 button Configure the setting of the selected icon. 
 button The “Volume control” screen appears. 
 button The “Keystone correction” screen appears. 
 button jove the selected item left. 
Adjust the setting value of the adjustment barG. 
 button jove the selected item right. 
Adjust the setting value of the adjustment bar. 
MENU button 
Return to the previous menu without changing the 
settings. 
When the main menu is displayed, the main menu will 
be closed. 
 
*Adjustment bar: To be used to adjust the setting values. 
(For example: Volume adjustment bar) 
 
 
 
■ The value set with of the adjustment bar using the   buttons cannot 
be returned to the previous value before setting by pressing the MENU 
button. 
■ The menu will be automatically closed after 30 seconds of no operation. 
Press the MENU button again to display the menu. 
■ The  setting  screen  for  Keystone/Volume  button  on  this  product  and  the 
setting  screen  for display  mode/keystone/brightness/contrast/eco/volume 
button of the remote control will be automatically closed after 3 seconds of 
no operation. 
N o t e           
						

							 
 
44 
 
 
MAIN MENU 
The following items can be configured from the main menu: 
Keystone adjustment/ Display mode selection/ Brightness adjustment/ Contrast 
adjustment/ Volume adjustment/ Language/ Detail settings 
 
If you select the item, a sub menu will be displayed. 
Refer to “Displaying the main menu” (Page42) for details on displaying the main 
menu.  
 
 
 
 
 
 
 
 
 
 
 
 
Icon Name Options/ 
Adjustable range Description 
 
Keystone 
adjustment 
 →P.46 
- 40 ~ + 40 
Default setting：0 
Correct the vertical keystone 
distortion. 
The correction can be made in 
increments of one degree. 
 
Display mode 
selection 
 →P.47 
User 
Set an appropriate image mode 
according to the scene. 
Cinema 
Photo 
Normal Default 
Game 
Presentation 
Bright (Max) 
 
Brightness 
adjustment 
 →P.52 
1 ~ 100 
Default setting：50 
Adjust the brightness of the 
image. 
The adjustment can be made in 
increments of one unit. 
    
						

							 
 
45 
 
Icon Name Options/ 
Adjustable range Description 
 
Contrast 
adjustment 
 →P.53 
1 ~ 100 
Default setting：
50 
Adjust the contrast of the image. 
The adjustment can be made in 
increments of one unit. 
 
Volume 
adjustment 
 →P.54 
1 ~ 10 
Default setting：7 
Adjust the volume of the image. 
The adjustment can be made in 
increments of one unit. 
 
Language 
 →P.55 
English 
Set the language for the menus 
and messages. 
French 
German 
Spanish 
Italian 
Swedish 
Dutch 
Portuguese  
Russian 
Japanese 
Simplified 
Chinese 
 
Detail settings 
→P.56 
The following items can be configured: 
ECO mode           Default setting：OFF 
Aspect ratio                   Default setting：AUTO(Fixed) 
Auto power off               Default setting：180 
Projection mode           Default setting：Front 
Installation mode           Default setting：Desktop 
CEC mode                     Default setting：OFF 
Factory settings 
 
 
 
■ The main menu will be automatically closed after 30 seconds of no 
operation or when the MENU button is pressed again. 
N o t e    
						

							 
 
46 
 
 
CORRECTING TH KEYSTONE DISTORTION 
1. Display the “Main” menu.   
Refer to “Displaying the main menu” (Page42). 
Press the MENU button on the remote control or on the control panel. 
The main menu will be displayed. 
 
2. Select the icon  with the   
buttons on the remote control or on the 
control panel. 
Press the  button to execute the selection. 
The “Keystone correction” window will be displayed. 
 
3. Correct the keystone distortion with the 
  buttons on the remote control or on 
the control panel. 
 
Press the  button to execute the correction 
and return to the main menu. 
 
Remote control or control panel  
Press the  button. 
(Press  when  the  projection  angle 
is increased.) 
 
 
 
Press the  button. 
(Press  when  the  projection  angle 
is decreased.) 
 
 
 
 
 
 
■ The keystone correction can cause an image to be slightly degraded 
because the correction is made electronically. 
■ The keystone distortion can be corrected to ±40°of the angle of tilt. 
N o t e 
Main menu 
Keystone correction window            
						

							 
 
47 
 
 
SELECTING THE DISPLAY MODE 
1. Display the “Main” menu.   
Refer to “Displaying the main menu” (Page42). 
Press the MENU button on the remote control or on the control panel. 
The main menu will be displayed. 
 
2.   Select the icon  with the   
buttons on the remote control or on the 
control panel. 
Press the  button to execute the selection. 
 
The “Display mode select” menu will be displayed. 
 
3.  Select the display mode with the    
buttons on the remote control or on the  
control panel. 
 Selected screen mode is shown by pressing 
 button. 
 
Press MENU button to return to the main 
menu. Turn off the main menu by pressing 
the MENU button again. 
 
To set up user mode, please refer to Setting up User Mode.(Page 49) 
 
Press the MENU button to cancel the selection. 
Main menu 
Display mode select menu          
						

							 
 
48 
 
 
The following display mode can be selected: 
Icon Mode Description 
 
User A Mode that can be adjusted to users’ 
preferences. (Page 49F 
 Cinema A mode suitable for films. 
 
Photo  
A mode suited for showing still images, 
such as photos, for exact color 
reproduction. 
 Normal Default  A  normal  mode  for  standard  shades  of 
color and brightness. 
 
Game  A  mode  suited  for  images  of  games  or 
animations.   
 
Presentation 
An  Advanced  chromogenic  mode  for 
vivid  projection  of  documents  such  as 
charts in computers or catalogs. 
 
Bright (Max) A mode for brighter projection. 
 
 
 
 
■ Color  in  the  presentation  mode  may  differ from  original.  Please  use  the 
photo mode for true color reproduction. 
N o t e    
						

							 
 
49 
 
 Setting up User mode 
User mode allows the color balance to be adjusted by setting color temperature,  
color gamut and gamma of the image. 
 
Icon Name Options/ Adjustable range Description 
 
Color 
temperature 
Lo： 5,000K,  
Mid：6,000K  
Hi： 9,300K 
Lower color temperature 
projects warm color. Higher 
color temperature projects cold 
color. 
 
Color gamut 
Std : sRGB 
Standard  color  gamut  for 
Windows environment. 
Wide : AdobeRGB 
Color gamut with wider G 
coverage that can express 
vibrant green color. 
Color  gamut  allows  you  to  set 
up recognizable color coverage 
for sRGB or AdobeRGB. 
 
Gamma Gamma 
γ=1.9, γ=2.2, γ=2.4 
Gray scale brightness. Lower 
value projects a brighter image. 
 
1. Select the User mode 
Select the icon    with the   buttons 
buttons on the remote control or on the  
control panel. 
Press the  button to execute the selection. 
The “User setting” menu will be displayed. 
 
2. Set the Color temperature 
Select the icon    with the   buttons. 
Press the  button to execute the selection. 
The “Color temperature setting” menu will  
be displayed. 
Select the color temperature with the    
buttons. 
Lo：5,000K,   Mid：6,500K,   Hi：9,300K 
 
Press the  button to execute the correction. 
Press the MENU button to return to the User setting menu. 
User setting menu 
Color temperature setting menu             
						

							 
 
50 
 
 
3. Set the Color gamut 
Select the icon    with the   buttons  
on the remote control or on the control panel. 
The “Color gamut Setting” menu will be displayed. 
 
Select the color gamut with the   buttons. 
 
Std：sRGB,  Wide：Adobe RGB equivalent 
 
Press the  button to execute the correction. 
Press the MENU button to return to the User setting menu. 
 
4. Set the Gamma 
Select the icon    with the   buttons  
on the remote control or on the control panel. 
The “Gamma Setting” menu will be displayed. 
 
Select the gamma with the   buttons. 
 
Gamma: γ=1.9,   γ=2.2,   γ=2.4 
 
Press the  button to execute the correction. 
Press the MENU button to return to the User setting menu. 
 
Color gamut Setting menu 
Gamma Setting menu