Element Electronics ELGFW601 Digital Lcd Tv User Manual

10
Remote Control Key Functions

2QO\::XSWRS.
REPEATQ86%VRXUFH 

11
Operating Your Television
Basic Operations
Turning Your TV On and Off
TURN ON LCD TV
1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode
and the LED will be red.
2. From the STANDBY mode, use the POWER button either on the main unit or on the remote
to turn your television on.
TURN OFF LCD TV
From ON mode, use the POWER button either on the main unit or on the remote to turn your
television to STANDBY mode.
Select Your Onscreen Language Preference
Note: If using...

12
Operating Your Television
Navigating the Onscreen Display
’Press the MENU button to display the main menu.
’Use  buttons to navigate and select the available menus.
Choosing a TV Channel
1. Use the CH+/CH- on the front panel or on the remote control.
’Press
CH+to increase the channel.
’Press
CH-to decrease the channel. 
2. Using 
0-9remote keys.
Enter the channel number with the 0-9 remote keys, then press “
OK” to select the channel.
For example:
1. Press 4, then press “
OK” to select channel 4.
2....

13
Operating Your Television
Selecting Input Source
You can display the input screen menu by pressingSOURCE on the 
remote control or 
SOURCE on the front panel, press/ button to
select, press “
OK” to confirm.
Picture Menu Options
Press the MENU on the front panel or MENU on the remote control and then use  to select the
PICTURE menu, press  or 
OKto enter (see picture below).
Picture Mode
Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in 
the...

14
Operating Your Television
Audio Menu Options
PressMENU on the front panel or MENU on the remote control and then use  to select the AUDIO
menu, press or OK to enter (see picture below).
Sound Mode
Balance
Press/ and then use / to adjust the audio output between left and right speakers.
Bass
Press          and then use          increase or decrease the level of the 
lower-pitched sounds.//
Treble
Press          and then use           to increase or decrease the level of 
higher-pitched sounds.//...

15
Operating Your Television
Setup Menu Options
Press the MENU on the front panel or MENU on the remote control and then use   to select the SETUP
menu, press
orOK to enter (see picture below).
Menu Language
/
Press          and then use           to select menu language among: English, 
Français or Español.//
Transparency
Press          and then use           to turn on or off the transparency function.
//
Zoom Mode
Press          and then use           to select the zoom mode among: Wide, Zoom, Cinema...

16
Operating Your Television
Lock
Press the MENU on the front panel or MENU on the remote control and then use   to select the LOCK
menu, press
orOK to enter (see picture below).
/
Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital 
password, then the screen will display the junior menu. After settings, press menu button to exit.
    NOTE: The factory password is 0000. 
Input
4-digital password
Change Password
Use DOWN button to select the “Change Password”...

17
Operating Your Television
Parental ControlPress Enter to enter the sub-menu and then use the 0-9 to enter the correct password:0,0,0,0. If used, this option feature can 
“block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings 
that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which 
program rating they consider acceptable, to the younger more sensitive...

18
Operating Your Television
Channel Menu Options
Press the MENU on the front panel or remote control and then use / to select the CHANNEL menu.
Press
 or OK to enter (see picture below).
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Air”as input signal in Antenna item, you can press RIGHT 
button to search the channels automatically.
The receivable channels will be stored automatically.When searching 
channels, press MENU to stop.
If you select “Cable”as input signal in...

Operating Your Television
Show / Hide 
Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then 
press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press 
OK button to show or hide the highlighted channel. 
Channel No. 
Display the number of current channel.
Channel Label
Display the lable of current channel.
TV Signal
Display the quality of current TV signal.
19