Element Electronics ELEFQ462 Digital Led Tv User Manual

							10
Remote Control Key Functions
79$9&RPSRQHQW+0,+0,+0,9*$86%
:LGH=RRP&LQHPD1RUPDO
REPEATQ86%VRXUFH 
						

							11
Operating Your Television
Basic Operations
Turning Your TV On and Off
TURN ON LED TV
1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode
and the LED will be red.
2. From the STANDBY mode, use the POWER button either on the main unit or on the remote
to turn your television on.
TURN OFF LED TV
From ON mode, use the POWER button either on the main unit or on the remote to turn your
television to STANDBY mode.
Select Your Onscreen Language Preference
Note: If using your LED TV for the first time, you should select the language which will be used 
for displaying menus and information boxes.
’Press          button to select Menu Language. .
’Press
/ button to select your desired language.
’When you are satisfied with your choice, press the MENUto exit.
Volume Adjustment
1. PressVOL +/-to adjust the volume
2. If you want to switch the sound off, press the MUTE
 , Press again to resume.
/
Setup Wizard 
Menu Language
Air/Cable
Cable System
Auto ScanEnglish
Cable
AUTO
Select
MoveExit 
						

							12
Operating Your Television
Navigating the Onscreen Display
’Press the MENU button to display the main menu.
’Use  buttons to navigate and select the available menus.
Choosing a TV Channel
1. Use the CH+/CH- on the front panel or on the remote control.
’Press
CH+to increase the channel.
’Press
CH-to decrease the channel. 
2. Using 
0-9remote keys.
Enter the channel number with the 0-9 remote keys, then press “
OK” to select the channel.
For example:
1. Press 4, then press “
OK” to select channel 4.
2. Press 4, then press 5, then press “
OK” to select channel 45.
3. Press 1, then press 2, then press 1, finally press “
OK” to select channel 121.
AUTO
Picture Mode
Contrast
Brightness
ColorStandard
Normal
SelectMoveExit
Picture
Audio
Time
Setup
Lock
Channel
Tint
Sharpness
Color Temp.
Blue Screen On
50
50
50
500
Sleep Timer
Time Zone
Daylight Saving Time
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
OffPacific
Off
Menu Language
Transparency
Zoom Mode
Noise Reduction
SelectMoveExit
Picture
Audio
Time
Setup
Lock
Channel
Advanced
Closed Caption
DLC
Restore DefaultOn English
OffWideMiddle
Enter Password
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
----
Air/Cable
Auto Scan
Favorite
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
Show/Hide
Channel No.
Channle Label
DTV Signal:
Cable
Sound Mode
Bass
Treble
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
Balance
Surround Sound
Auto Volume
SPDIF TypeOff
On
RAW Standard
50
50
0
Audio LanguageEnglishAuto Motion 120Hz
Off
/ 
						

							13
Operating Your Television
Selecting Input Source
You can display the input screen menu by pressingSOURCE on the 
remote control or 
SOURCE on the front panel, press/ button to
select, press “
OK” to confirm.
Picture Mode
Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in 
the
PICTURE menu. You may select the picture mode directly by pressing the P.MODE button on the 
remote control.
Brightness
Press/ and then use /to adjust the brightness of the picture.
Contrast
Press/ and then use /to adjust the contrast of the picture.
Color
Press/ and then use /to adjust the color of the picture.
Sharpness
Press/and then use /to adjust the sharpness of the picture.
Color Temp.
Press to select mode, Cool, Warm, Normal. /
Tint
Press/ and then use /to adjust the tint of the picture.
Blue Screen
Press          and then use          to select On or Off.//
INPUT SOURCE
          TV
         AV
   Component
       HDMI1
       HDMI2
       HDMI3
         VGA
         USB
Auto Motion 120Hz
Press          and then use          to select Off, Normal , Strong , Low or Demo.//
Picture Mode
Contrast
Brightness
ColorStandard
Normal
SelectMoveExit
Picture
Audio
Time
Setup
Lock
Channel
Tint
Sharpness
Color Temp.
Blue Screen
Auto Motion 120HzOn
Off
50
50
50
500
Picture Menu Options
Press the MENU on the front panel or MENU on the remote control and then use  to move the
PICTURE menu, press  or 
OKto enter (see picture below).
/ 
						

							14
Operating Your Television
Sound Mode
Balance
Press/ and then use / to adjust the audio output between left and right speakers.
Bass
Press          and then use          increase or decrease the level of the 
lower-pitched sounds.//
Treble
Press          and then use           to increase or decrease the level of 
higher-pitched sounds.//
Surround  Sound
Press/ to switch surround sound On or Off.
Audio language
Press/ to switch auto volume control On or Off.s volume to be controlled automatically.
Auto Volume
This function allow
SPDIF Type
Press/ to select between PCM or RAW.
Press
/ to select audio languages among: English, French, Spanish.
Sleep Timer
Press          and then use           to set up the sleep timer among: Off,
5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min
or 240min.//
Time Zone
Press/ and then use / to set up the time zone among: Pacific, 
Daylight Saving Time
Press/ and then use / to set up the daglight saving time  Alaska, Hawaii, Eastern, Central or Mountain.  Press          and then use          to select User, Standard, Music and Movie.
//
On or Off.
Audio Menu Options
PressMENU on the front panel or MENU on the remote control and then use  to move the AUDIO
menu, press  or OK to enter (see picture below).
/
Sound Mode
Bass
Treble
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
Balance
Surround Sound
Auto Volume
SPDIF TypeOff
On
RAW Standard
50
50
0
Audio LanguageEnglish
Time Menu Options
Press the MENU on the front panel or MENU on the remote control and then use   to move the TIME
menu, press  or OK to enter (see picture below).
/
Sleep Timer
Time Zone
Daylight Saving Time
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
OffPacific
Off 
						

							15
Operating Your Television
Menu Language
Press          and then use           to select menu language among: English, 
Français or Español.
//
Transparency
Press          and then use           to turn on or off the transparency function.
//
Zoom Mode
Press          and then use           to select the zoom mode among: Wide, Zoom, Cinema or Normal.
//
Noise Reduction
Press          and then use          to select the noise reduction mode among: Weak, Middle, Strong, Off.
//
DLC
Press
/ and then use / to dynamic luminance control On or Off.
Restore Default
Select  “Restore Default”, press 
OK,and it will display “Are you sure”,
select
“OK” to select the factory default settings.
CC Mode
Basic Selection
Advanced Selection
Option
Select
MoveReturn
Picture
Audio
Time
Setup
Lock
Channel
CC1Off
Service1
Are you sure?
Yes
Select
MoveReturn
Picture
Audio
Time
Setup
Lock
Channel
No
Setup Menu Options
Press the MENU on the front panel or MENU on the remote control and then use   to move the SETUP
menu, press or
OK to enter (see picture below).
/
Menu Language
Transparency
Zoom Mode
Noise Reduction
SelectMoveExit
Picture
Audio
Time
Setup
Lock
Channel
Advanced
Closed Caption
DLC
Restore DefaultOn English
OffWideMiddle
H-POS
V-POS
Clock
Phase
Adjust
MoveReturn
Picture
Audio
Time
Setup
Lock
Channel
Auto
50
50
50
50 
						

							16
Operating Your Television
Lock
Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital 
password, then the screen will display the junior menu. After settings, press menu button to exit.
    NOTE: The factory password is 0000. 
$$$$$$$ $
$Input
4-digital password
Change Password
Use DOWN button to select the “Change Password” item, then press 
RIGHT button to enter into the following menu.Input the new 4-digital 
password and input it again to confirm.
System Lock
Allows you to turn on or off the system lock.If you turn off the system 
lock, then the following items(US, Canada, RRT Setting and Reset RRT) 
will unable to use.
US
Use Down button to highlight the “US”item, then press RIGHT button to 
enter into the following menu.
Canada
Use Down button to highlight the “Canada” item, then press RIGHT button 
to enter into the following menu.
RRT Setting
Rating Region Table seting.
Reset RRT
Allows you to reset the RRT setting.Canada English
Use LEFT and RIGHT buttons to select among: E, C, C8+, G, PG, 
14+ and 18+.
Canada French
Use LEFT and RIGHT buttons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+
Change Password
System Lock
US
Next
Move Return
Picture
Audio
Time
Setup
Lock
Channel
Canada
RRT Setting
Reset RRT
Clear Lock
Off
Enter New Password
Confirm Password
0-9 Return
Picture
Audio
Time
Setup
Lock
Channel
--------
Canada English
Canada French
Picture
Audio
Time
Setup
Lock
Channel
EE
Select
MoveReturn
Press the MENU on the front panel or MENU on the remote control and then use   to move the LOCK
menu, press or
OK to enter (see picture below).
/
Enter Password
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
---- 
						

							17
Operating Your Television
Parental ControlPress Enter to enter the sub-menu and then use the 0-9 to enter the correct password:0,0,0,0. If used, this option feature can 
“block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings 
that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which 
program rating they consider acceptable, to the younger more sensitive viewer. It can be preset and turned either on or off by the 
user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and 
children blocks should be both programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture
industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children.
OverviewTo ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections 
below, as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences,
and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus 
examples below.
Things to Consider before Setting up Parental ControlDetermine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, more restrictive ratings will be 
automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.) Do you want to block the 
auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/Video input jacks)
Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog, 
Bad Language, Sex Scenes, Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set 
Password option, using the numbers keys on the remote. Do not forget the password, it is the only way you can access the Parental
Control menu and change rating selections, or turn Parental Control off. Do you want the Parental Control to be active at all times? If 
not, you can turn it on or off with the Lock On/Off option.
’You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time.
’Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources.
’Even if you choose to leave the AUX inputs unblocked, the ratings you specify will automatically restrict the programming that appears from
the video sources.
’You can not disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time
setting specified if power is disconnected.
Information
Motion Picture Association of America (MPAA) Rating System
Grade Meaning
G General Audiences Content not offensive to most viewers
PG Parental Guidance Suggested Content is such that parents may not want their children to view the program
PG-13 Parental Guidance Strongly
CautionedProgram is inappropriate for preteens, with a greater degree of offensive material suggested than a PG
rated program
R Restricted viewing Not for children under 17, Strong element of sex and/or violence
NC-17 No Children Under age 17 Not for children under 17 under any circumstances. Strong sexual content
X Hard Core Films Same as NC-17 rating
No Rating No Rating MPAA Not Rated
TV Parental Guideline Rating System
Grade Meaning
TV-Y Young Children Content not offensive to most viewers
TV-Y7 Children 7 and over Considered suitable for children over 7, may contain Fantasy Violence Scenes
TV-G Parental Audience Considered suitable for all audiences; children may watch unattended
TV-PG Parental GuidenceSuggested Unsuitable for younger children, may contain; Suggestive Dialogue, Bad Language, Sex, and Violence Scenes
TV-14 Parents Strongly Cautioned Unsuitable for children under 14, may contain: Strong Dialogue, Bad Language, Sex, and Violence Scenes
TV-MA Mature Audience Only Adultsonly, may contain Strong Dialogue, Bad Language, Sex, and Violent Scenes
Canadian Rating:Canadian English is used throughout all English-speaking Canada (C, C8+, G, PG, 14+, 18+). 
Canadian French is used in Quebec (G, 8 ans+, 13 ans+, 16 ans+, 18 ans+)
Note:The V-Chip will automatically block certain categories that are “more restrictive”. If you block TV-Y
category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories
in the “young adult” will be blocked (TV-G, TV-PG, TV-14, and TV-MA). 
						

							18
Operating Your Television
Channel Menu Options
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Air”as input signal in Antenna item, you can press RIGHT 
button to search the channels automatically.
The receivable channels will be stored automatically.When searching 
channels, press MENU to stop.
If you select “Cable”as input signal in Antenna item, allows you to select 
Cable System among: Auto, STD, IRC and HRC.Use DOWN button to 
highlight the “Start to Scan”, then press RIGHT button to search the 
channels automatically.The receivable channels will be stored 
automatically. When searching channels, press MENU to stop.
Auto Scan
Use Down button to highlight the “Auto Scan” item, then press RIGHT 
button to enter into the following menu.
Favorite
Allows you to add these channels which you desired as the favorite channels.
Use UP or DOWN button to highlight the “Favorite”item, then press RIGHT
button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press OK button 
to add or remove the highlighted channel as favorite.
Cable System
Start to Scan
Picture
Audio
Time
Setup
Lock
Channel
AUTO
Select
MoveReturn
Picture
Audio
Time
Setup
Lock
Channel
RF CH  :      50
Found  :      0
Next
Move Return
Press the MENU on the front panel or remote control and then use   to move the CHANNEL menu.
Press  or OK to enter (see picture below)./
Air/Cable
Auto Scan
Favorite
Select
MoveExit
Picture
Audio
Time
Setup
Lock
Channel
Show/Hide
Channel No.
Channle Label
DTV Signal:
Cable 
						

							Operating Your Television
19 Show / Hide 
Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then 
press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press 
OK button to show or hide the highlighted channel. 
Channel No. 
Display the number of current channel.
Channel Label
Display the lable of current channel.
DTV Signal
Display the quality of current DTV signal.
50-1
50-2
50-3
Picture
Audio
Time
Setup
Lock
Channel
KOCE-HD
Press’OK’Change
Move Return
Channel No.Channel NameFavorite
KOCE-SD
KOCE-LB