Electrolux Ewt 136580 W User Manual

user manual
Washing Machine
EWT 136580 W
 

3
2
4
1
1. The control panel
2. Lid button
3. Filter access cover
4. Adjustable levelling feet
The control panel
134
5 2
1. Programme selector
2. Display
3. Pushbuttons and their functions
4. Start/Pause pushbutton
5. Time manager pushbuttons
The symbols
9810
12 34 76 5
1. Temperature2. Spin speed
3. Options
4. Delay start
5. Child safety
6. Door lock
7. Length of cycle or Timer delay countdown
8. Time manager
9. Animated clock (cycle in progress)
10.
Cycle running : 
 Prewash,  Wash, 
Rinse or Steam...

Dispenser box
 Prewash Wash
 Softener (do not fill above the MAX symbol  M )
Safety Information
Please read these points carefully before installing
and using your appliance. Keep this user manual
with your appliance.
General safety
• Do not modify or attempt to modify this appli-
ance. This would put yourself in danger.
• Ensure that all coins, safety pins, brooches,
screws etc have been removed before starting
a washing programme. If left in washing, they
can seriously damage the appliance.
• Use the...

Personalisation
Child safety
This option provides two types of locking :
• if the option is activated after the cycle has star-
ted, no changes to the options or programme is
possible.
The cycle runs and you must deactivate the op-
tion to run a new cycle.
• if the option is activated before the cycle has
started, the appliance cannot be started.
To activate child safety, turn appliance on and
press “Rinse plus” 
 and “Delay start”  simul-
taneously until the confirmation symbol 
 showson in the display....

the symbols disappear. If one of the options is not
compatible with the selected programme, “Err”
flashes on the display and the “Start/Pause” push-
button flashes red.
“Prewash” option 
The appliance runs a prewash at 30°C max.
“Rinse plus” option 
The washing machine will add one or more rinses
during the cycle. This option is recommended for
people with sensitive skin and in soft water areas.
Temporary : Press the “Rinse plus” 
 pushbut-
ton. The option is only active for the selected pro-
gramme....

End of the programme
The washing machine stops automatically ; the
“Start/Pause” pushbutton goes out and “0” flashes
on the display. The lid can only be opened around
2 minutes after the washing machine has come to
a stop. The symbol 
 disappears. Turn the
programme selector to the “Stop”  position. Re-
move washing. Unplug and close water inlet tap.Stand by : once the programme has finished after
a few minutes the energy saving system will be
enabled. The brightness of the display is reduced.
By...

Programme / Type of washingLoadPossible options
  Steam Refresh :  For every types of fab-
ric. Remove the smells of dry-cleaning, cam-
phor, perfume. Reduce the smells of smoke.
Can not remove animals smells.1,0 kg 
1) Reference programme for test confirming to CEI 456 standard : 45 L / 1,02 kWh / 175 min
2) To use on dried laundry, without detergent. At the end of a steam cycle, the laundry feels humid. It is recommended
to take out your clothes from the drum quickly and to wait 10 minutes before to...

ProblemsCauses
The washing machine
doesn’t start or doesn’t
fill :• the appliance isn’t plugged in correctly, the electrical installation isn’t
working, there is a power failure,
• the lid of your appliance and the drum shutters aren’t closed firmly,
• the programme start command hasn’t been properly selected,
• the water supply has been cut off, the water inlet tap is closed,
• the water inlet filters are dirty,
• a red tab appears on the water inlet hose.
The appliance fills but
empties straight away...

ProblemsCauses
The E10 error code ap-
pears in the display1) and
the “Start/Pause” push-
button flashes red
2):
• the water tap is closed,
• the water supply has been cut off.
The EF0 error code ap-
pears in the display1) and
the “Start/Pause” push-
button flashes red
2):
• the drainage filter is obstructed,
• the anti-flooding security system has been activated, please proceed as
follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before unplugging,
- call the after-sales...

Unpacking
1
 
2
3
 
4
Untying
2 3
1ba 
1a1b
2a
 
2b
3
 
4
To install your washing machine at the same level
as surrounding furniture, proceed as shown on
picture 4.
Water supply
Install the supplied water inlet hose at the rear of
your washing machine by proceeding as follows.
Do not reuse an old hose. The water inlet hose can
not be extended. If it is too short, please contact
the after-sales service.
1
 
2
Open the water inlet tap. Check there are no leaks.
Drainage
Fit the U-piece on the
drainage...