Electrolux Ewt 135410 User Manual

user manual
Washing Machine
EWT 135410 W - EWT 105410 W
 

1
2
4
3
1. The control panel
2. Lid button
3. Filter access cover
4. Adjustable levelling feet
Control panel
123456
1. Programme selector
2. Pushbuttons and their functions
3. Display
4. Add washing light
5. Start/Pause pushbutton
6. Time manager pushbuttons
The symbols
12 34 5
1. Time manager
2. Temperature
3. Child safety
4. Cycle running : 
 Prewash/Wash, 
Rinse,  Drain,  Spin
5. Length of cycle or Timer delay count- down
2 electrolux
 

Dispenser box
 Prewash Wash
 Softener (do not fill above the MAX symbol M )
SAFETY INFORMATION
Please read these points  carefully before in-
stalling and using your  appliance. Keep this
user manual with your appliance.
General safety
• Do not modify or attempt to modify this appliance. This would  put yourself in dan-
ger.
• Ensure that all coins,  safety pins, brooch-
es, screws etc have been removed be-
fore starting a washing programme. If left
in washing, they  can seriously damage
the appliance....

Use
• Your appliance is intended for normal do-
mestic use. Do not  use the appliance for
commercial or industrial purposes or for
any other purpose.
• Refer to the instruct ions on the label of
each item before washing.
• Do not put items into the washing ma- chine which have had stains removed
with petrol, alcohol, trichlorethylen etc. If
such stain removers  have been used,
wait until the product has evaporated be-
fore putting these it ems into the drum. • Empty pockets and unfold items.
• This...

ments if you have selected the “prewash”
option. Pour fabric softener into the com-
partment 
 if necessary.
Selection of desired programme
Turn the programme selector to the re-
quired programme. The “Start/Pause” 
pushbutton fl ashes green.
If you turn the progra mme selector to an-
other programme while  a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. “Err” flashes and the
“Start/Pause” 
 pushbutton flashes red for
a few seconds.
Selecting the temperature
Press the...

Soil levelIconType of fabric
IntensiveFor heavy soiled
items
NormalFor normal soiled
items
DailyFor daily soiled items
LightFor slightly soiled
items
Quick1)For very slightly
soiled items
Super quick1)For items used or
worn for a short time
Refresh1) 2)For refreshing items
only
Super re-
fresh1) 2)For refreshing a very
few items only
1) To use on a half load.
2) The symbol flashes and disappears : this wash cycleis a refresh cycle only.
The availability of these different levels var-
ies depending on...

Programme / Type of washingLoadPossible options
 Delicates (cold - 40°) :  For all delicate
materials, for example curtains.2,5 kgNight silence plus, Prewash, Rinse
plus, Time manager, Delay start
  Wool (cold - 40°) :  Machine washable
wool carrying the labels  “pure new wool, ma-
chine washable, does not shrink”.1,0 kgNight silence plus, Delay start
  Silk (cold - 30°) :  Fabric machine wash-
able at 30°C.1,0 kgNight silence plus, Delay start
  Lingerie (cold - 40°) :  For very delicate
items, like...

1
 
2
3
 
4
Water inlet filters
To clean, proceed as follows :
1
 
OPERATING PROBLEMS
Numerous checks were carried out on your
appliance before it left the factory. Howev-
er, should you notice a malfunction, pleaserefer to the sections 
below before contact-
ing the after-sales service.
ProblemsCauses
The washing machine
doesn’t start or doesn’t
fill :• the appliance isn’t plugged in correct ly, the electrical installation isn’t
working,
• the lid of your appliance and the dr um shutters aren’t closed...

ProblemsCauses
The appliance vibrates,
is noisy :• all packaging have not been removed from the appliance (see installa-tion section),
• the appliance isn’t level and is unbalanced,
• the appliance is too close to the wall or furniture,
• washing is unevenly distributed in the drum,
• the load is too small.
The wash cycle is much
too long :• the water inlet filters are dirty,
• the power or water supply has been cut off,
• the motor overheating detector has been activated,
• the water inlet temperature...

are no restrictions on the use of powder de-
tergents. Liquid detergents must not be
used when a prewash or the reference pro-
gramme (see Programmes table) has been
selected. For cycles without prewash, they must be added via means of a dosing ball.
Detergent tablets or 
doses must be placed
in the detergent compar tment of your appli-
ances dispenser box.
TECHNICAL SPECIFICATIONS
DIMENSIONSHeight
Width
Depth850 mm
400 mm
600 mm
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION 230 V / 50 Hz
2300 W
WATER...