Electrolux Ewt 105410 User Manual

EWT 135410 W - EWT 105410 W................................................ .............................................
ENWASHING MACHINE USER MANUAL
 

1
2
4
3
1The control panel
2Lid button
3Filter access cover
4Adjustable levelling feet
CONTROL PANEL
123456
1. Programme selector
2. Pushbuttons and their functions
3. Display
4. Add washing light
5. Start/Pause pushbutton
6. Time manager pushbuttons
THE SYMBOLS
12 34 5
1Time manager
2Temperature
3Child safety
4Cycle running :  Prewash/Wash, 
Rinse,  Drain,  Spin
5Length of cycle or Timer delay count-
down
2 electrolux
 

DISPENSER BOX
 Prewash Wash Softener (do not fill above the MAX
symbol 
M )
 SAFETY INFORMATION
Please read these points carefully before in-
stalling and using your appliance. Keep this
user manual with your appliance.
GENERAL SAFETY
• Do not modify or attempt to modify this
appliance. This would put yourself in dan-
ger.
• Ensure that all coins, safety pins, brooch-
es, screws etc have been removed be-
fore starting a washing programme. If left
in washing, they can seriously damage
the appliance.
• Use...

mation which would damage your appli-
ance.
Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
USE
• Your appliance is intended for normal do-
mestic use. Do not use the appliance for
commercial or industrial purposes or for
any other purpose.
• Refer to the instructions on the label of
each item before washing.
• Do not put items into the washing ma-
chine which have had stains removedwith petrol, alcohol, trichlorethylen...

PROPORTIONING OF DETERGENTS
Pour the amount of washing into the wash-
ing 
 and prewash  compartments if
you have selected the “prewash” option.
Pour fabric softener into the compartment
 if necessary.
SELECTION OF DESIRED
PROGRAMME
Turn the programme selector to the re-
quired programme. The “Start/Pause” 
pushbutton flashes green.
If you turn the programme selector to an-
other programme while a cycle is in pro-
gress, the appliance will ignore the new se-
lected programme. “Err” flashes and the...

TIME MANAGER
The cycle can be made longer or shorter by
using the “Time Manager” 
 pushbuttons.
The level of soiling of the laundry is also in-
dicated.
Soil levelIconType of fabric
IntensiveFor heavy soiled
items
NormalFor normal soiled
items
DailyFor daily soiled items
LightFor slightly soiled
items
Quick1)For very slightly
soiled items
Super quick1)For items used or
worn for a short time
Refresh1) 2)For refreshing items
only
Super re-
fresh1) 2)For refreshing a very
few items only
1) To use on a half...

PROGRAMMES TABLE
Programme / Type of washingLoadPossible options
 Cottons (cold - 90°) : White or colour,
e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.5,5 kgNight silence plus, Prewash, Rinse
plus, Time manager, Delay start
 Synthetics (cold - 60°) : Synthetic fab-
rics, body linen,fab, coloured farics, non-iron
shirts, blouses.2,5 kgNight silence plus, Prewash, Rinse
plus, Time manager, Delay start
 Delicates (cold - 40°) : For all delicate
materials, for example...

ProgrammesLoad
(kg)Energy con-
sumption
(kWh)Water con-
sumption (li-
tre)Approximate
programme
duration (mi-
nutes)Remaining
moisture
(%)
1)
Cottons 60 °C5.51.205815060
Cottons 40 °C5.50.705814060
Synthetics 40 °C2.50.60458037
Delicates 40 °C2.50.50507037
Wool/Hand wash
30 °C10.40456132
Standard cotton programmes 
Standard 60 °C
cotton5.50.944619060
Standard 60 °C
cotton2.750.753313060
Standard 40 °C
cotton2.750.603313060
1) At the end of spin phase.
Off Mode (W)Left On Mode (W)
0.101.60
CARE AND...

 
OPERATING PROBLEMS
Numerous checks were carried out on your
appliance before it left the factory. Howev-
er, should you notice a malfunction, pleaserefer to the sections below before contact-
ing the after-sales service.
ProblemsCauses
The washing machine
doesn’t start or doesn’t
fill :• the appliance isn’t plugged in correctly, the electrical installation isn’t
working,
• the lid of your appliance and the drum shutters aren’t closed firmly,
• the programme start command hasn’t been properly selected,...

ProblemsCauses
The wash cycle is much
too long :• the water inlet filters are dirty,
• the power or water supply has been cut off,
• the motor overheating detector has been activated,
• the water inlet temperature is lower than usual,
• the foam detection security system has been activated (too much de-
tergent) and the washing machine has begun draining the foam,
• the out of balance detector has been activated: an extra phase has
been added to distribute washing more evenly in the drum.
The washing...