Electrolux Ewt 10420 W User Manual

User manual
Инструкцияѝпоѝэксплуатации
EWT 11420 W - EWT 10420 WWashing machine
Стиральнаяѝмашина
Downloaded From WashingMachine-Manual.com ManualС 

We were thinking of you
when we made this product
 

 3
Welcome to the world of Electrolux
Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You find some examples on the cover in
this manual. Please take a few minutes
to study this manual so that you can
take advantage of the benefits of your
new machine. We promise that it will
provide a superior User Experience...

4 contents
Contents
Warnings ........................................... 5
Description of the appliance  .............. 7
Personalisation .................................. 8
How to run a wash cycle ?  ................ 9
Washing guide  ................................ 14
Programmes table  ........................... 16
Consumption .................................. 17
Care and cleaning  ........................... 18
Operating problems  ........................ 19
Technical specifications...

warnings 5
Warnings
These warnings are for the safety of
you and others around you. 
Please read these points carefully
before installing and using your ap-
pliance. Thank you for your atten-
tion.
Keep this user manual with your ap-
pliance. If the appliance is sold or gi-
ven to another person, please make
sure this user manual is included.
This way, the new user will have the
relevant operating instructions and
warnings.
General safety
• Do not modify or attempt to modify
this appliance. This would...

6 warnings
Precautions to be taken against 
frost
If your appliance is exposed to tempera-
tures below 0°C, the following precau-
tions must be taken :
• Close the tap and disconnect the
inlet hose.
• Place the end of this hose and the
drain hose in a basin on the floor.
• Select the Drain programme let it run
until the end of the cycle.
• Disconnect the appliance from the
power supply by turning the program
selector to “Stop”.
• Unplug the appliance.
• Screw the inlet hose back on and
replace the drain...

description of the appliance / personalisation 7
Description of the appliance
The control panel
Lid handle
Filter access cover
Lever for moving the appliance
Adjustable levelling feet
Dispenser box
 Prewash
 Wash
 Softener (do not fill above the MAX
symbol )
The control panel
Programme selector
Pushbuttons and their functions
Display“Start/Pause” pushbutton
“Time Manager” pushbuttons
M
1
2
34
1
5
4
3
2
5
1
5
4
3
2
15423
 

8 description of the appliance / personalisation
The  symbols
Time manager
Temperature
Child safetyCycle running
Length of cycle or Timer delay
countdown
Personalisation
Child safety
This option provides two types of
locking :
- if the option is activated after the cycle
has started, no changes to the options
or program are possible.
The cycle runs and you must deactivate
the option to run a new cycle.
- if the option is activated before the
cycle has started, the appliance cannot
be started.
To activate...

how to run a wash cycle 9
How to run a wash cycle?
Using for the first time
• Ensure the electrical and water con-
nections comply with the installation
instructions.
• Remove the polystyrene insert and
all other items inside the drum.
• Run an initial wash cycle at 90°C,
without any washing but with deter-
gent to clean the water tank.
Daily use
Loading washing
• Open the lid of the appliance.
• Open the drum by depressing the loc-
king button A : The two shutters
unlock automatically.
• Load the...

10 how to run a wash cycle
progress, the appliance will ignore the
new selected programme. “Err” flashes
and the “Start/Pause” pushbutton
flashes red for a few seconds then the
current cycle display reappears.
Selecting the temperature
Press the “Temperature” 
pushbutton repeatedly to in-
crease or decrease the tem-
perature if you want your
washing to be washed at a
different temperature to the
one selected by the applian-
ce. The   symbol means a
cold wash. 
Selecting the spin speed
Press the “Spin”...