Electrolux Ews 86110 W User Manual

WASHING PROGRAMMES
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS 95°-60°
Main wash - Rinses
Long spin at maximum spin speed
Max. load 6 kg - Reduced load 3 kg
For white and fast coloured cottons (heavily and nor-
mally soiled items).
SPIN
NO SPIN
RINSE HOLD
PREWASH
DAILY
SUPER QUICK 
1)
EXTRA RINSE
 2)
COTTONS ECONOMY  60°
Main wash - Rinses
Long spin at maximum spin speed
Max. load 6 kg
For white...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
DELICATES 40°-30°
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 3 kg- Reduced load kg 1,5
Delicate fabrics: acrylics, viscose, polyester.
SPIN
NO SPIN
RINSE HOLD
PREWASH
DAILY
SUPER QUICK 
1)
EXTRA RINSE
 2)
WOOL/HANDWASH   40° - COLD
Main wash - Rinses
Maximum spin speed 800 rpm
Max. load 2 kg
Washing programme for machine washable wool as well
as for...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
 = OFF
For cancelling the programme which is running or to switch the machine off .
1) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as
indicated. . Full loading is possible however with somewhat reduced cleaning results.
2) If using liquid detergent, a programme without PREWASH must be selected.
CARE...

Clean the chamber of dispenser drawer
with a brush.
Washing drum
Rust deposits in the drum may occur due
to rusting foreign bodies in the washing or
tap water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any wash-
ing to clean off any cleaning agent resi-
dues.
Programme: Short Cotton Programme
at...

3. Open the pump door levering on the
groove with a coin (or with the suitable
tool, that you can find in the bag con-
taining the instruction booklet, depend-
ing on the model).
1
2
4. Place a bowl with a small edge close to
the pump to collect any spillage.
5. Pull out the emergency emptying cap
from the filter cover, using pliers.
6. When no more water comes out, un-
screw the pump cover by turning it an-
ti-clockwise, using pliers, and remove
the filter. Always keep a rag nearby to
dry up any water...

9. Replace the filter into the pump by in-
serting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
10. Replace the emergency emptying cap
into the filter cover and fix it firmly.
11. Close the pump door.
Warning! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump. Never remove the pump cover
during a wash cycle, always wait until
the appliance has finished the cycle,
and is empty. When refitting the pump
cover...

5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine
and make sure the connection is tight.
8. Turn on the water tap.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has
cooled down;
4. open the pump...

•1 flash = «The machine does not fill»,
follow the corresponding suggestions in
«Possible cause/Solutions» box and re-
start the programme.
•2 flashes = «The machine does not
empty and/or does not spin», follow
the corresponding suggestions in «Possi-ble cause/Solutions» box and restart the
programme.
Once the problem has been eliminated,
press the button 5 to restart the pro-
gramme. If after all checks, the problem
persists, contact your local Service Centre.
ProblemPossible cause/Solution
The washing...

ProblemPossible cause/Solution
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much
foam) has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fit-
tings. It is not always easy to see this as the water runs down the
hose; check to see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The cap on the emergency emptying hose...

If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
          Ser. No. ... ... ...
Mod. ..
.
 ..
. ...
P
rod
. No
.
 .
.
. ... ..
  
     
    
      
  
    
  Ser.  N
o. ..
. ..
.
 ...
TECHNICAL DATA
DimensionsWidth
Height
Depth60 cm
85 cm
44 cm
Electrical connection
Voltage - Overall power...