Home > Electrolux > Washing Machine > Electrolux Ews 126540 W User Manual

Electrolux Ews 126540 W User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Electrolux Ews 126540 W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							If you are unable to identify or solve the
    problem, contact our service centre. Before
    telephoning, make a note of the model, se-
    rial number and purchase date of your ma-
    chine: the Service Centre will require this
    information.
    Mod. ... ... ...
    Prod. No. ... ... ...
              Ser. No. ...
    TECHNICAL DATA
    DimensionsWidth
    Height
    Depth60 cm
    85 cm
    44 cm
    Electrical connection
    Voltage - Overall power - FuseInformation on the electrical connection is given on the rating
    plate, on the inner edge of the appliance door.
    Water supply pressureMinimum
    Maximum0,05 MPa
    0,8 MPa
    Maximum LoadCotton6 kg
    Spin SpeedMaximum1200 rpm
    CONSUMPTION VALUES
    Programme1)Energy consumption
    (KWh)2)Water consumption
    (litre)2)
    White Cottons 90 °C1.9562
    Cottons 60 °C1.2559
    Cottons 40 °C0.7559
    Synthetics 40 °C0.549
    Delicates 40 °C0.5558
    Wool/ Handwash 30 °C0.350
    1) Refer to the display for the programme time.
    2) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type
    of laundry, on the temperature of the water supply and on the ambient temperature.
    Standard programmes for the Energy
    Label consumption values
    The cotton 60 °C economy and cotton 40
    °C economy are the standard cotton pro-
    grammes for normally soiled cotton laundry.
    They are suitable to clean normally soiled
    cotton laundry and they are the most effi-
    cient programmes in terms of combinedenergy and water consumption for washing
    that type of cotton laundry.
    They agree with EN60456.
    The actual water temperature may dif-
    fer from the declared cycle tempera-
    ture.
    INSTALLATION
    UNPACKING
    All transit bolts and packing must be re-
    moved before using the appliance.You are advised to keep all transit devices
    so that they can be refitted if the machine
    ever has to be transported again.
    electrolux 21
     
    						
    							1. After removing all the packaging, care-
    fully lay machine on it’s back to remove
    the polystyrene base from the bottom.
    2. Remove the power supply cable and
    the draining hose from the hose holders
    on the rear of the appliance.
    3. Unscrew the three bolts.
    1 2
    4. Slide out the relevant plastic spacers.
    5. Fill the smaller upper hole and the two
    large ones with the corresponding plas-
    tic plug caps supplied in the bag con-
    taining the instruction booklet.
    POSITIONING
    Install the machine on a flat hard floor.
    Make sure that air circulation around the
    machine is not impeded by carpets, rugs
    etc. Check that the machine does not
    touch the wall or other kitchen units. Level
    the washing machine by raising or lowering
    the feet. The feet may be tight to adjust as
    they incorporate a self locking nut, but the
    machine MUST be level and stable. If nec-
    essary, check the setting with a spirit level.
    Any necessary adjustment can be made
    with a spanner. Accurate levelling prevents
    vibration, noise and displacement of the
    machine during operation.
    Caution! Never place cardboard,
    wood or similar materials under the
    machine to compensate for any
    unevenness in the floor.
    22 electrolux
     
    						
    							WATER INLET
    An inlet hose is supplied and can been
    found inside the machine drum. Do not use
    the hose from your previous machine to
    connect to the water supply.
    Important! This appliance must be con-
    nected to a cold water supply.
    1. Open the porthole and extract the inlet
    hose.
    2. Connect the hose with the angled con-
    nection to the machine. Do not place
    the inlet hose downwards. Angle the
    hose to the left or right depending on
    the position of your water tap.
    3. Set the hose correctly by loosening the
    ring nut. After positioning the inlet hose,
    be sure to tighten the ring nut again to
    prevent leaks.
    45°
    35°
    4. Connect the hose to a tap with a 3/4”
    thread. Always use the hose supplied
    with the appliance.
    The inlet hose must not be lengthened. If it
    is too short and you do not wish to move
    the tap, you will have to purchase a new,
    longer hose specially designed for this type
    of use.
    WATER-STOP DEVICE
    The inlet hose is provided with a water stop
    device, which protects against damage
    caused by water leaks in the hose which
    could develop due to natural ageing of the
    hose. This fault is shown by a red sector in
    the window «A». Should this occur, turn the
    water tap off and refer to your Service Cen-
    tre to replace the hose.
    A
    WATER DRAINAGE
    The end of the drain hose can be posi-
    tioned in three ways.
    •Hooked over the edge of a sink using
    the plastic hose guide supplied with the
    machine. In this case, make sure the end
    electrolux 23
     
    						
    							cannot come unhooked when the ma-
    chine is emptying. This could be done by
    tying it to the tap with a piece of string or
    attaching it to the wall.•In a sink drain pipe branch. This
    branch must be above the trap so that
    the bend is at least 60 cm above the
    ground.
    •Directly into a drain pipe at a height of
    not less than 60 cm and not more than
    90 cm. The end of the drain hose must
    always be ventilated, i.e. the inside diam-
    eter of the drain pipe must be larger than
    the outside diameter of the drain hose.
    The drain hose must not be kinked.
    The drain hose may be extended to a maximum of 4 metres. An additional drain hose
    and joining piece is available from your local Service Centre.
    ELECTRICAL CONNECTION
    Information on the electrical connection is
    given on the rating plate on the inner edge
    of the appliance door.
    Check that your domestic electrical installa-
    tion can take the maximum load required,
    also taking into account any other applian-
    ces in use.
    Connect the machine to an earthed
    socket.
    The manufacturer does not accept
    any responsibility for damage orinjury through failure to comply
    with the above safety precaution.
    The power supply cable must be
    easily accessible after installing the
    machine.
    Should the appliance power supply
    cable need to be replaced, this
    must be carried out by a Service
    Centre.
    ENVIRONMENT CONCERNS
    The symbol  on the product or on its
    packaging indicates that this product may
    not be treated as household waste. Instead
    it should be taken to the appropriate
    collection point for the recycling of electrical
    and electronic equipment. By ensuring this
    product is disposed of correctly, you will
    help prevent potential negativeconsequences for the environment and
    human health, which could otherwise be
    caused by inappropriate waste handling of
    this product. For more detailed information
    about recycling of this product, please
    contact your local council, your household
    waste disposal service or the shop where
    you purchased the product.
    24 electrolux
     
    						
    							PACKAGING MATERIALS
    The materials marked with the symbol 
    are recyclable.
    >PEPSPP
    						
    							electrolux 27
     
    						
    							132928090-A-462011
     www.electrolux.com/shop
       
     
    						
    All Electrolux manuals Comments (0)

    Related Manuals for Electrolux Ews 126540 W User Manual