Electrolux Ews 12610 W User Manual
Here you can view all the pages of manual Electrolux Ews 12610 W User Manual. The Electrolux manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 31
MalfunctionPossible causeSolution If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. The machine makes an unusual noise●The machine is fitted with a type of motor which makes an unusual noise compared with other...
Page 32
32electrolux technical data Technical data Dimensions Width 60 cm 85 cm 45 cm Height Depth Water supply pressure Minimum 0,05 MPa 0,8 MPa Maximum CottonMaximum Load 4.5 kg MaximumSpin Speed1200 rpm Electrical connection Voltage - Overall power - FuseInformation on the electrical connection is given on the rating plate on the inner edge of the appliance door 132966460.qxd 06/02/2008 11.28 Pagina 32
Page 33
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.(*) The programme “Cottons Economy ” with 4.5 kg at 60°C is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. Consumption values Water consumption (in litres)Programme Energy consumption...
Page 34
34electrolux installation Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner unscrew and remove the 3 rear bottom screws. 2. Slide out the three plastic pins. 3. Stop all the holes with the plastic plugs supplied with the instruction booklet. Positioning Install the machine on a flat hard floor. Make sure...
Page 35
Important! Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap,...
Page 36
36electrolux installation The drain hose may be extended to a maximum of 4 metres. An additional drain hoseand joining piece is available from your local Service Centre. Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer declines any responsibility...
Page 37
Environment concerns Packaging materials The materials marked with the symbol are recyclable. >PEPSPP
Page 38
38electroluxguarantee conditions European guarantee This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications: ●The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid...