Electrolux Ews 106210 W User Manual

							user manual
Washing Machine
EWS 106210 W
 
						

							Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information    2
Product description    4
Control panel    5
First use    7
Daily use    7
Helpful hints and tips    10
Washing programmes    11Care and cleaning    14
What to do if…    19
Technical data    21
Consumption values    21
Installation    22
Electrical connection    25
Environment concerns    25
  Subject to change without notice
 Safety information
Important! Read carefully & keep for future
reference.
• The safety of Your appliance complies with
the industry standards and with legal re-
quirements on the safety of appliances.
However, as manufacturers, we feel it is
our duty to provide the following safety
notes.
• It is most important that this instruction
book should be retained with the appli-
ance for future reference. Should the ap-
pliance be sold or transferred to another
owner, or should you move house and
leave the appliance, always ensure that the
book is supplied with the appliance in or-
der that the new owner can get to know
the functioning of the appliance and the
relevant warnings.
• You MUST read them carefully before in-
stalling or using the appliance.
• Before first starting up, check the appli-
ance for any damage incurred during
transport. Never connect up a damaged
appliance . If parts are damaged, contact
your supplier.
• If the appliance is delivered in the winter
months when there are minus tempera-
tures. Store it at room temperature for 24
hours before using for the first time.
General safety
• It is dangerous to alter the specifications or
attempt to modify this product in any way.• During high temperature wash pro-
grammes the door glass may get hot. Do
not touch it!
• Make sure that small pets do not climb into
the drum. To avoid this, please check into
the drum before using.
• Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive dam-
age and must not be placed into the ma-
chine.
• Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces,
washable belts etc in a washing bag or pil-
low case as it is possible for such items to
slip down between the tub and the inner
drum.
• Do not use your washing machine to wash
articles with whalebones, material without
hems or torn material.
• Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
• Under no circumstances should you at-
tempt to repair the machine yourself. Re-
pairs carried out by inexperienced people
may cause injury or serious malfunction-
ing. Contact your local Service Centre. Al-
ways insist on genuine spare parts.
2  electrolux
 
						

							Installation
• This appliance is heavy. Care should be
taken when moving it.
• When unpacking the appliance, check that
it is not damaged. If in doubt, do not use it
and contact the Service Centre.
• All packing and transit bolts must be re-
moved before use. Serious damage can
occur to the product and to property if this
is not adhered to. See relevant section in
the user manual.
• After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable against the wall.
• If the machine is situated on a carpeted
floor, please adjust the feet in order to al-
low air to circulate freely under the appli-
ance.
• Always be sure, that there is no water leak-
age from hoses and their connections after
the installation.
• If the appliance is installed in a location
subject to frost, please read the “dangers
of freezing” chapter.
• Any plumbing work required to install this
appliance should be carried out by a quali-
fied plumber or competent person.
• Any electrical work required to install this
appliance should be carried out by a quali-
fied electrician or competent person.
Use
• This appliance is designed for domestic
use. It must not be used for purposes other
than those for which it was designed.
• Only wash fabrics which are designed to
be machine washed. Follow the instruc-
tions on each garment label.
• Do not overload the appliance. See the
Washing Programme Table.
• Before washing, ensure that all pockets
are empty and buttons and zips are fas-
tened. Avoid washing frayed or torn arti-
cles and treat stains such as paint, ink,
rust, and grass before washing. Under-
wired bras must NOT be machine washed.
• Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensurethat the fluid is removed from the garment
before placing in the machine.
• Never pull the power supply cable to re-
move the plug from the socket; always
take hold of the plug itself.
• Never use the appliance if the power sup-
ply cable, the control panel, the working
surface or the base are damaged so that
the inside of the washing machine is ac-
cessible.
Child Safety
• This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• The packaging components (e.g. plastic
film, polystyrene) can be dangerous to chil-
dren - danger of suffocation! Keep them
out of childrens reach.
• Keep all detergents in a safe place out of
children’s reach.
•
Make sure that children or pets do not
climb into the drum. To prevent children or
pets becoming trapped inside the drum
the machine incorporates a special fea-
ture. To activate this device, rotate the but-
ton (without pressing it) inside the door
clockwise until the groove is horizontal. If
necessary use a coin. To disable this de-
vice and restore the possibility of closing
the door, rotate the button anticlockwise
until the groove is vertical.
electrolux  3
 
						

							Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows total
use of detergent and reduces water consumption so saving energy.
12
3
4
5
6
1Detergent dispenser drawer
2Control panel
3Door opening handle
4Rating Plate
5Drain pump
6Adjustable feet
Detergent dispenser drawer
 Compartment for detergent used for pre-
wash and soak phase or for stain remover
used during the stain action phase (if availa-
ble). The prewash and soak detergent is
added at the beginning of the wash pro-
gramme. The stain remover is added during
the stain action phase.
 Compartment for powder or liquid deter-
gent used for main wash. If using liquid de-
tergent pour it just before starting the pro-
gramme.
 Compartment for liquid additives (fabric
softener, starch).
Follow the product manufacturer’s recom-
mendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer. Any fabric softener or
starching additives must be poured into the
compartment before starting the wash pro-
gramme.
4  electrolux
 
						

							Programme Chart
Various programme charts in different lan-
guages are supplied with the appliance. One
is on the front side of the detergent dispenser
drawer and the others are attached into theuser manual assy. The chart in the drawer
can be replaced easily: remove the chart
from the drawer by pulling it towards the right
and insert the chart with the language re-
quired.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as
the temperature selector dial, the buttons and the pilot lights. These are presented by
relevant numbers on the following pages.
12345678
1PROGRAMME selector dial
2
TEMPERATURE selector dial
3SPIN reduction button
4OPTIONS button
5EXTRA RINSE button
6
START/PAUSE button
7DELAY START button
8Pilot Lights
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Temperature selector dial
This dial allows you to select the temperature
more suitable to the laundry to be washed.
By selecting the position 
 the machine will
wash with cold water.
Spin speed Reduction
By pressing this button you can reduce the
maximum spin speed allowed for the selec-
ted programme or to select the available op-
tion(s).
No spin
By selecting this option, all spinning phases
are suppressed and replaced by a drain, so
as not to wrinkle the laundry. Recommended
for extremely delicate fabrics. On some pro-grammes the rinses will be performed with
more water.
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will
be necessary to empty out the water. To
empty out the water, please read the para-
graph «At the end of the programme».
Daily, Light and Quick options
By pressing this button it is possible to mod-
ify the washing time, automatically proposed
by the machine in order to obtain good per-
formances in a short time.
•Daily : to be used for normally soiled laun-
dry (cotton, synthetic or delicate items).
•Light : to be used for lightly soiled laundry
(cotton, synthetic or delicate items).
•Super : a very short cycle for slightly soiled
items that have been worn for a short time.
electrolux  5
 
						

							Extra Rinse
This appliance is designed to save energy. If
it necessary to rinse the laundry using an ex-
tra quantity of water (extra rinse), select this
option. Some additional rinses will be per-
formed. This option is recommended for
people who are allergic to detergents, and in
areas where the water is very soft.
Delay Start
The start of the programme can be delayed
by 3, 6 or 9 hours by means of this button.
Start Pause
This button allows you to start or to interrupt
the selected programme.
Indicator pilot lights
8.1
8.2
8.3
After having pressed the button 6 , the
WASHING pilot light (8.1) illuminates. When
the pilot light 8.1 illuminates this means that
the machine is operating.
The DOOR pilot light (8.2) illuminates when
the programme starts and indicates if the
door can be opened:
• light on: the door cannot be opened. The
machine is working or has stopped with
water left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light flashing: the door is opening in a few
minutes.
When the programme has finished the END
CYCLE pilot light (8.3) comes on.
Table of Symbols
Table of Symbols
= Cottons= Temperature
= Prewash= Cold wash
= Synthetics= No Spin
= Delicates= Rinse Hold
= Wool= Daily
= Lingerie= Light
= Soak= Super Quick
= Rinse= Options
= Drain= Extra Rinse
= Spin= Delay Start
= Economy= Washing
6  electrolux
 
						

							= Easy Iron= Door locked
= Jeans= End of cycle
= Mini programme= Start/Pause
= Special Programmes  
First use
• Ensure that the electrical and water
connections comply with the installa-
tion instructions.
• Ensure that the drum is empty.
• Pour 2 liters of water into the main
wash compartment 
 of the deter-
gent drawer in order to activate theECO valve. Then run a cotton cycle at
the highest temperature without any
laundry in the machine, to remove any
manufacturing residue from the drum
and tub. Pour 1/2 a measure of de-
tergent into the main wash compart-
ment and start the machine.
Daily use
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Measure out the detergent and the fab-
ric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment 
 or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the com-
partment marked 
 (the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
electrolux  7
 
						

							Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will automatically select the maximum spin
value provided for the programme you have
chosen. You can change this value by press-
ing the corresponding button. The green pi-
lot light of the button 6 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
« O » to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 6 will blink 3 times to
indicate a wrong selection. The machine
will not perform the new selected
programme.
Select the required temperature by
turning the temperature selector dial (2)
Turn clockwise this dial to select the more
convenient to your laundry washing temper-
ature.
Reduce the spin speed by pressing
button 3
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 3 repeatedly to change the spin
speed, if you want your laundry to be spun ata different speed. The relevant light illumi-
nates.
Select the available options by pressing
buttons 3, 4 and 5
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integrated
red pilot light of the button 6 flashes for 3
times.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button 7 repeat-
edly, to select the desired delay. The relevant
light illuminates.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at
any moment, before you press button 6 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 7 .
3. Press button 6 :
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 6 .
2.
Press button 7 once, the light relevant to
the selected delay goes off
3. Press button 6 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
8  electrolux
 
						

							Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must
set the machine to PAUSE (by pressing the
button 6 ) and then wait a few minutes. After
you have closed the door, press the button
6 again.
Start the programme by pressing button
6
To start the selected programme, press the
button 6 , the corresponding green pilot light
stops blinking. The pilot lights  8.1 and 8.2
illuminate to indicate that the appliance starts
operating and the door is locked.
To interrupt a programme which is running,
press the button 6 : the corresponding green
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 6
again . If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the red pilot
light of the button 6 blinks for 3 times.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
6 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to O and then to the new pro-
gramme position. Start the new programme
by pressing the button 6 again. The washing
water in the tub will be not emptied out.
Interrupting a programme
Press the button 6 to interrupt a programme
which is running, the corresponding green
pilot light starts blinking.
Press the button again to restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to 
 to cancel a pro-
gramme which is running.You can select now a new programme.
Opening the door
After the programme has started (or during
the delay time) the door is locked, if you need
to open it, set first the machine to PAUSE by
pressing the button 6 . After a few minutes
the light 8.2 goes out and it is possible to
open the door.
If this light remains lit and the door is locked,
this means that the machine is already heat-
ing or that the water level is too high. In any
case, do not try to force the door!
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to O . After a few mi-
nutes the door can be opened (pay atten-
tion to the water level and tempera-
ture!) .
After closing the door, it is necessary to se-
lect the programme and options again and to
press button 6 .
At the end of the programme
The machine stops automatically. The pilot
light of button 6 , the pilot lights  8.1 and
8.2 go off. The light 8.3 illuminates.
If a programme or an option that ends with
water left in the tub has been selected, the
pilot light 8.2 remains on and the door is
locked to indicate that the water must be
emptied out before opening the door.
Follow the below instructions to empty out
the water:
1. Turn the programme selector dial to O .
2. Select the draining or spinning pro-
gramme.
3. Reduce the spin speed if needed, by
pressing the relevant button.
4. Press button 6 .
At the end of the programme, the light 8.2
goes off to indicate that the door can be now
opened. Turn the programme selector dial to
O to switch the machine off.
Remove the laundry from the drum and care-
fully check that the drum is empty. If you do
not intend to carry out another wash, close
the water tap. Leave the door open to pre-
vent the formation of mildew and unpleasant
smells.
electrolux  9
 
						

							Stand by : once the programme has fin-
ished after a few minutes the energy sav-
ing system is enabled with the pilot lightsswitched on. By pressing any button the
appliance will come out of the energy
saving status.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each gar-
ment label and the manufacturer’s washing
instructions. Sort the laundry as follows:
whites, coloureds, synthetics, delicates,
woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable
to treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpen-
tine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton
cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will already have been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).Ball point pen and glue: moisten with ace-
tone1), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid, then
rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
1), then with acetic
acid; treat any residual marks on white fab-
rics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, me-
thylated spirits or benzine, then rub with de-
tergent paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the en-
vironment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine de-
tergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
1) do not use acetone on artificial silk
10  electrolux