Electrolux Ewp 126300 W User Manual

							Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maxi-
mum Fabrics Load - Type of LaundryOptionsDetergent
Compart-
ment
 RINSE
Rinse - Short spin speed 700 rpm. If a spin speed higher
than 700 rpm is selected, by pressing the relevant but-
ton, the appliance performs a long spin. (Maximum spin
speed: 1000 rpm for model EWP 106300W (1200 rpm
for model EWP 126300W)
Max. load 6 kg
To rinse and spin cotton garments which have been
washed by hand. Select the EXTRA RINSE option to in-
tensify the rinsing action. The appliance adds additional
rinses.SPIN REDUCTION,
RINSE HOLD,
EXTRA RINSE,
DELAY START
 DRAIN
Draining of water
For emptying out the water left in the drum.  
 SPIN
Drain and long spin at maximum spin speed: 1000 rpm
for model EWP 106300W (1200 rpm for model EWP
126300W)
Max. load 6 kg
Separate spin for hand washed garments and after pro-
grammes with the Rinse Hold option selected. You can
choose the spin speed by pressing the relevant button to
adapt it to the fabrics to be spun.
If a spin speed at 700 rpm is selected, by pressing the
relevant button, the appliance performs a short spin.SPIN REDUCTION,
DELAY START 
 Special programmes
 EASY IRON
60°- 
 (Cold)
Main wash - Rinses - Maximum spin speed: 700 rpm
In order to obtain the best anti-creasing result, reduce
the load of synthetic items. (Recommended load 1 kg)
Synthetic or mixed fabrics. Gentle wash and spin to
avoid any creasing. The appliance performs additional
rinses.
RINSE HOLD,
EXTRA RINSE,
DELAY START
 5 SHIRTS
30°
Main wash - Rinses - Maximum spin speed: 700 rpm
Synthetics and mixed fabrics. Suitable for 5 - 6 shirts
lightly soiled.DELAY START
 MINI 30
30°
Main wash - Rinses - Maximum spin speed 700 rpm
Max. load 3 kg
Synthetics and delicates. Lightly soiled items or which
only needs freshening up.DELAY START
electrolux 21
 
						

							Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maxi-
mum Fabrics Load - Type of LaundryOptionsDetergent
Compart-
ment
 JEANS
60°- 
 (Cold)
Main wash - Rinses - Maximum spin speed: 1000 rpm
for model EWP 106300W (1200 rpm for model EWP
126300W)
Max. load 3 kg
Trousers, shirts or jackets in denim and jersey realized
with hi-tech materials. The Extra Rinse option is activated
automatically.
SPIN REDUCTION,
RINSE HOLD,
DELAY START
1) If you select the Super Quick option by pressing button 4, we recommend that you reduce the maximum load as
indicated. Full loading is possible however with somewhat reduced cleaning results.
CONSUMPTION VALUES
Programme1)Energy consumption
(KWh)2)Water consumption
(litre)2)
White Cottons 95 °C2.178
Cottons 60 °C1.272
Cottons 40 °C0.7572
Synthetics 40 °C0.657
Delicates 40 °C0.665
Wool/ Handwash 30 °C0.348
1) Refer to the display for the programme time.
2) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type
of laundry, on the temperature of the water supply and on the ambient temperature.
Standard programmes for the Energy
Label consumption values
The cotton 60 °C economy and cotton 40
°C economy are the standard cotton pro-
grammes for normally soiled cotton laundry.
They are suitable to clean normally soiled
cotton laundry and they are the most effi-
cient programmes in terms of combinedenergy and water consumption for washing
that type of cotton laundry.
They agree with EN60456.
The actual water temperature may dif-
fer from the declared cycle tempera-
ture.
CARE AND CLEANING
Warning! Switch the appliance off and
remove the mains plug from the socket
before any cleaning action.
MAINTENANCE WASH
With the use of low temperature washes it
is possible to get a build up of residues in-
side the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.• Select the hottest cotton wash pro-
gramme.
• Use a normal measure of detergent,
must be a powder with biological proper-
ties.
CLEANING THE DISPENSER DRAWER
The washing powder and additive dispens-
er drawer should be cleaned regularly.
• Remove the drawer.
22 electrolux
 
						

							• To aid cleaning, the top part of the addi-
tive compartment should be removed.
• Use a stiff brush to clean and remove all
washing powder residue.
• Clean all the removed parts of the dis-
penser drawer under a tap to remove any
traces of accumulated powder.
• Use the previous brush to clean the re-
cess, ensuring that upper and lower part
of it is well cleaned.
After having cleaned the dispenser and the
drawer recess, replace it.
CLEANING THE DRAIN FILTER
The filter permits to hold fluff or foreign bod-
ies left unawares in the laundry.
The pump must be cleaned regularly.
To clean the filter, proceed as follows:
• Tturn programme selector dial to position
 .
• Unplug the appliance.;
• Open the door.
• Turn the drum and align the filter cover
(FILTER) with the arrow on the door
seal.;
electrolux 23
 
						

							• Open the filter cover by pressing the spe-
cial hook and by rotating the cover up-
wards.;
Warning! Keep the filter cover open
until the filter removal.
• Before removing the filter, remove any
fluff or small objects from around the fil-
ter.
• Remove the filter and clean it under the
tap.
• If necessary, place the filter cover in the
right position again.
• Open the filter cover and insert the filter
again.
24 electrolux
 
						

							•The filter is inserted correctly when
the indicator on its top is visible and
blocked.
• Close the filter cover.
• Insert the mains plug again.
CLEANING THE WATER INLET
FILTERS
Important! If the appliance doesnt fill, it
takes a long time to fill with water, the
starting button flashes red or the display (if
available) shows the relevant alarm (see
chapter What to do if... for more details),
check if the water inlet filters are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from the tap.
• Clean the filter in the hose with a stiff
brush.
• Screw the hose back onto the tap. Make
sure the connection is tight.
• Unscrew the hose from the appliance.
Keep a towel nearby because some wa-
ter may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
• Screw the hose back to the appliance
and make sure the connection is tight.
• Turn on the water tap.
electrolux 25
 
						

							WHAT TO DO IF…
The appliance does not start or stops dur-
ing operation. Certain problems are due to
lack of simple maintenance or oversights,
which can be solved with the help of the in-
dications described in the charts, without
calling out an engineer.
During appliance operation it is possible
that the red pilot light of the button 8 flash-es, the display shows a fault code and the
buzzer sounds to indicate that the appli-
ance is not working.
Before contacting your local Service Cen-
tre, please carry out the checks listed be-
low.
Fault code and mal-
functionPossible cause - Solution
Problem with the
water supplyThe water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked
• Clean the water inlet filters (read Cleaning the water inlet fil-
ters for more details).
Problem with the
water drainageThe drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
If the appliance stops working without discharging the water ,
first carry out an emergency drain:
•
turn the programme selector dial to 
 ;
• unplug the appliance;
• close the water tap;
• if necessary, wait until the water has cooled down;
  • unscrew the drain hose from the rear support (see Frost pre-
caution) and unhook it from the sink or spigot;
• let it run along the floor;
• place a bowl on the floor and place the end of the draining
hose into the bowl. The water should drain by gravity into the
bowl. When the bowl is full, empty it. Repeat the procedure
until water stops flowing out ;
• screw the draining hose to the rear support and reposition it;
  • open the door and remove the laundry;
• carry out the drain filter cleaning as described in Cleaning
the drain filter;
• at the end of cleaning action, close the door and insert the
mains plug again;
• run a drain programme to check if the appliance works now.
26 electrolux
 
						

							Door openThe door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops dur-
ing operation without any visible alarm.Before contacting your local Service Cen-
tre, please carry out the checks listed be-
low.
MalfunctionPossible cause / Solution
The appliance does
not start:
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 8
has not been pressed.
• Please turn the selector dial and press the button 8 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The appliance fills
then empties immedi-
ately:The end of the drain hose is too low.
• Refer to paragraph in Water drainage in chapter Installation.
The appliance does
not empty and/or does
not spin:An option or a programme that ends with the water still in the tub or a
that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the
floor:
Too much detergent or unsuitable detergent (creates too much foam)
has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It
is not always easy to see this as the water runs down the hose; check
to see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The door will not
open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
electrolux 27
 
						

							MalfunctionPossible cause / Solution
The appliance vibrates
noisily:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
• Adjust the feet.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or
the appliance does not
spin:
The electronic unbalance detection device has cut in because the laun-
dry is not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before the
unbalance disappears and normal spinning can resume. If, after 10 mi-
nutes, the laundry is still not evenly distributed in the drum, the appli-
ance will not spin. In this case, redistribute the load manually and select
the spin programme.
• Load more laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the
spinning programme.
No water is visible in
the drum:Appliances based on modern technology operate very economically us-
ing very little water without affecting performance.
Unsatisfactory wash-
ing results
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The appliance makes
an unusual noiseThe appliance is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures a
softer start and more even distribution of the laundry in the drum when
spinning, as well as increased stability of the appliance.
After completing these checks, switch on
the appliance and press the button 8 to re-
start the programme.
If the malfunction shows again, contact
your Service Centre.
The necessary data for the service centre is
on the rating plate. We recommend that
you write the data here:
Mod. ... ... ...
Prod. No. ... ... ...
          Ser. No. ...
Model description
(MOD.)...............................
Product number
(PNC)...............................
Serial number
(S.N.)...............................
28 electrolux
 
						

							electrolux 29
 
						

							30 electrolux