Electrolux Ewn 14991 W User Manual

use electrolux  11
 by pressing Temp.or Spinbutton the
display returns the default status.
If you press any key after the
programme has started with «child lock»
enabled, the display shows the
message «Machine is locked, use
key combination to unlock it.». 
At the end of the programme it is
necessary to press simoultaneously
and  buttons for 5 seconds
until the display will show the message
«Machine unlocked» to select a new
programme.
Load the laundry
Open the door by carefully pulling the
door handle...

12electroluxuse
(*) Only withCottons ,Synthetics
and Delicates programmes.
The Start/Pausebutton light will start
flashing.
The selector dial is divided into following
sections:
●Cottons , Synthetics , Delicates
.
●Economy programmes  : Cottons
, Synthetics 
.
●Spin  , Delicate spin 
, Drain ,
Rinses .
●Special :Mini 30’  ,
,Handwash
, Wool  , Silk  , Shirts  ,
Lingerie , Blanket , Curtains 
and Jeans  .
●Favourite programmes  :1, 2.
The selector dial can be turned either
clockwise or anticlockwise....

use electrolux  13
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every minute.
Programme progress display
After you have pressed the Start/Pause
button, the display of the the machine
shows which phase of the programme
wash is performing. 
On the display you can see the symbol
of the selected type of fabric, the
current phase, the duration of the wash
programme and the end of...

14electroluxuse
End of programme
When the programme has finished the
messages «Door Unlocked» and
«Finished» appear alternatively.
The door  icon remains lighted-on to
inform that the wash cycle has finished
and the door can be opened.
If your laundry is not removed during 10
minutes after the programme is finished,
the backlight of the display switches off
and the energy saving system will be
enabled.
Only the Start/Pausebutton pilot light
is flashing to indicate that the appliance
has to be switched...

useelectrolux  15
No spinoption eliminates all the
spin phases and increases the number
of rinses for cottons, synthetics, deli-
cates and silk.
Rinse Hold  :by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows the icon of
the selected programme and the
message «Finished», while on the right
of the display the end cycle and the
current time appear. The buzzer sounds
a short jingle, the...

16electroluxuse
Press the Okbutton to activate and
confirm your choice, press it again to
deactivate the selected option. 
Once you have completed the selection
of the options, press Temp.or Spin
buttons or simply wait 10 seconds to
return the display in the default status.
The selected icons will be shown on the
display.
Prewash: select this option if you
wish your laundry to be prewashed before
the main wash (not available for Mini
30’,Wool, Handwash, Silk, Shirts, Lingerie
and  Blanket).
The Prewash...

use electrolux  17
button you can move through the
options menu till you locate «End
Time».
 Press Okbutton to activate this
option (the visualized time starts to
flash).
 By pressing Upor Down
button you can increase or decrease
the delay time.
 Press Okbutton to confirm your
delay.
 Press Temp.or Spinbutton to return
the display to the default status.
 Press the Start/Pausebutton to start
the programme. The programme will
start after the selected delay has
expired.
Programme End Time

...

18electroluxuse
 by pressing  or  select the
number of Favourite(1-2) in which
you wish memorize your customized
programme.
 press the Okbutton to save the
selected programme. On the display
appears the message «Saved» in
highlighted mode.
 by pressing Temp.or Spinbutton the
display returns the default status.
To change the memorized programme
setting repeat the procedure from the
beginning. 
Note
If the memory space is already used by
a programme previously selected, the
display will show ther message...

use electrolux  19
 to consult the informations of another
Guide you must return to the Wash
Guide menu selecting the «Back»
symbol and repeat the
procedure starting from the 4th point.
 by pressing Temp.or Spinbutton the
display returns to the default status.
Select the “Time manager” option
 



	
(

	



&(

	
(

	



 !
$




$


	
(

	




...

20electroluxuse
Select the Start/Pause
To start the selected programme, press
the Start/Pausebutton; the green
pilot light stops flashing.
On the display will appear the icon,
and alternatively the name and the
running phase of the selected
programme to indicate that the
appliance starts operating and the door
is locked.



	

	
(

	



To interrupt a programme which is
running, depress the Start/Pause
button: the green pilot light starts to
flash and the...