Electrolux Ewg 14550 W User Manual

At the end of the programme
The machine stops automatically. Three
blinking 0.00 appear on the display and the
pilot light of button 8 goes off. Some acoustic
signals sound.
If a programme or an option that ends with
water left in the tub has been selected, the
door remains locked to indicate that the wa-
ter must be emptied out before opening the
door.
Follow the below instructions to empty out
the water:
1.
Turn the programme selector dial to O .
2. Select the draining or spinning pro-
gramme.
3....

acid; treat any residual marks on white fab-
rics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, me-
thylated spirits or benzine, then rub with de-
tergent paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the en-
vironment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent Com-
partment
COTTONS ECONOMY
90° - 40°
Main wash - Rinses
Maximum spin speed 1400 rpm
Max. load 6 kg
White and fast coloured cotton .
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to obtain
a good washing efficiency so saving energy.SPIN
NO SPIN
RINSE HOLD
EASY...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent Com-
partment
WOOL
40° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 2 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics.
Note : A single or bulky item may cause imbalance. If
the appliance doesn’t perform the final spin phase, add
more items, redistribute the load manually and then se-
lect the...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent Com-
partment
SPIN
Drain and long spin
Maximum spin speed 1400 rpm
Max. load 6 kg
Separate spin for hand washed garments and after pro-
grammes with the RINSE HOLD and NO SPIN option
selected. You can choose the spin speed by pressing
the relevant button to adapt it to the fabrics to be spun.SPIN 
O=OFF
For cancelling the programme which is running or to
switch the machine...

2. Remove the conditioner insert from the
appropriate compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as it will
go, so that it is firmly in place
5. Clean all parts of the machine, especially
the nozzles in the top of the washing-in
chamber, with a brush.
6. Insert the detergent dispenser drawer in
the guide rails and push it in.
Washing drum
Rust deposits in the drum may occur due to
rusting foreign bodies in the washing or tap
water containing iron.
Important! Do...

Drain pump
The pump should be inspected regularly and
particularly if:
• the machine does not empty and/or spin
• the machine makes an unusual noise dur-
ing draining due to objects such as safety
pins, coins etc. blocking the pump.
Proceed as follows:
1. Disconnect the appliance.
2. If necessary wait until the water has
cooled down.
A
B
3. Place a container close to the pump to
collect any spillage.
4. Pull out the emergency emptying hose
( B ), place it in the container and remove
its cap cover.
5....

Warning!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump. Never remove the pump
cover during a wash cycle, always wait until
the appliance has finished the cycle, and is
empty. When replacing the cover, ensure it
is securely re-tightened so as to stop leaks
and young children being able to remove it.
Cleaning the water inlet filter
If you notice that the machine is taking longer
to fill, check that the filter in the water inlet
hose is not blocked....

solved easily without calling out an engineer.
Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that
the red pilot light of button 8 blinks, one of
the following alarm codes appears on the
display and some acoustic signals sound ev-
ery 20 seconds to indicate that the machine
is not working:• : problem with the water supply.
•
 : problem with the water draining.
•
 : door open.
Once the problem has been eliminated,
press the...

ProblemPossible cause/Solution
Unsatisfactory washing re-
sults:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end...