Electrolux Ewfm 12470 W User Manual

User Manual
Washing Machine and Drying Top CALIMA
EWFM 12470 W
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information    2
Product description    4
Control panel    5
First use    8
Personalisation    8
Daily use    8
Drying Top - How to dry    11
Helpful hints and tips    14Washing programmes    16
Care and cleaning    18
What to do if...    22
Technical data    25
Consumption values    25
Installation    25
Electrical connection    29
Environment concerns    29
  Subject to change without notice
 Safety...

Installation
• This appliance is heavy. Care should be
taken when moving it.
• When unpacking the appliance, check that
it is not damaged. If in doubt, do not use it
and contact the Service Centre.
• All packing and transit bolts must be re-
moved before use. Serious damage can
occur to the product and to property if this
is not adhered to. See relevant section in
the user manual.
• After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not...

Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows total
use of detergent and reduces water consumption so saving energy.
12
3
4
5
6
 92 mm
87
1Detergent dispenser drawer
2Control panel
3Door opening handle
4Rating Plate
5Drain pump
6Adjustable feet
7Drying top
8Extractable shelf
 
Calima - The Drying Top
Your appliance is integrated with an easy to use drying top equipped...

Detergent dispenser drawer
 Compartment for detergent used for pre-
wash and soak phase or for stain remover
used during the stain action phase (if availa-
ble). The prewash and soak detergent is
added at the beginning of the wash pro-
gramme. The stain remover is added during
the stain action phase.
 Compartment for powder or liquid deter-
gent used for main wash. If using liquid de-
tergent pour it just before starting the pro-
gramme.
 Compartment for liquid additives (fabric
softener, starch).
Follow...

Table of symbols
Cottons
Synthetics
Delicates
Easy Iron
Jeans
Spin
Drain
Rinses
Lingerie
Silk
Handwash
Wool
Sport Intensive
 + Cottons Economy
Cold Wash
Temperature
Rinse Hold
Prewash
Extra Rinse
Delay Start
Time Manager
Door
Child Lock
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Temperature
This button allows you to increase or de-
crease the washing temperature.
Spin
By pressing this button you can change the
spin speed of the selected programme or...

Display
7.47.57.1
7.27.3
The display shows the following information:
7.1:
•Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05  ). The duration is calculated
automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
•Delayed start
The Selected delay set by pressing the rel-
evant button appears on the display for a
few...

First use
• Ensure that the electrical and water
connections comply with the installa-
tion instructions.
• Remove the polystyrene block and
any material from the drum.
• Pour 2 liters of water into the main
wash compartment 
 of the deter-
gent drawer in order to activate theECO valve. Then run a cotton cycle at
the highest temperature without any
laundry in the machine, to remove any
manufacturing residue from the drum
and tub. Pour 1/2 a measure of de-
tergent into the main wash compart-
ment and...

If required, pour fabric softener into the com-
partment marked 
 (the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatically
select the maximum spin value provided for
the programme you have chosen. You can
change these values by operating the corre-
sponding buttons. The green...

– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having
pressed button 8 :
1. Set the washing machine to PAUSE by
pressing button 8 .
2.
Press button 6 once until the symbol 0’ is
displayed
3.
Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
DRAIN programme.
Start the programme by pressing button
8
To start the selected...