Home > Electrolux > Washing Machine > Electrolux Ewf 127570 W User Manual

Electrolux Ewf 127570 W User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Electrolux Ewf 127570 W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ProblemPossible cause/Solution
    The machine makes an un-
    usual noise:The machine is fitted with a type of motor which makes an unusual
    noise compared with other traditional motors. This new motor en-
    sures a softer start and more even distribution of the laundry in the
    drum when spinning, as well as increased stability of the machine.
    No water is visible in the
    drum:Machines based on modern technology operate very economically
    using very little water without affecting performance.
    After a steam programme,
    garments are partially wet:The appliance is not accurately level.
    • Check the levelling and adjust it by raising or lowering the feet.
    After a steam programme,
    garments are not sufficient-
    ly smooth:A wrong STEAM programme has been selected (e.g. Synthetic in-
    stead of Cotton).
    • Note the composition of the fabric.
    Excessive laundry load.
    • Reduce the laundry load.
    If you are unable to identify or solve the
    problem, contact our service centre. Before
    telephoning, make a note of the model, se-
    rial number and purchase date of your ma-
    chine: the Service Centre will require this
    information.
    Mod. ... ... ...
    Prod. No. ... ... ...
              Ser. No. ...
    CONSUMPTION VALUES
    ProgrammeEnergy consumption
    (KWh)Water consumption
    (litres)Programme duration
    (Hours.Minutes)
    White Cottons 90°2.2065
    For the duration of
    the programmes,
    please refer to the
    display on the con-
    trol panel.Cottons 60°1.4062
    Cotton ECO 60° 1)1.1952
    Cottons 40°0.9062
    Synthetics 40°0.4844
    Delicates 40°0.5558
    Wool/ Handwash 30°0.2552
    1) « Cotton Eco » at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in
    compliance with EEC 92/75 standards.
    The consumption data shown on this chart is to be considered purely indicative, as it
    may vary depending on the quantity and type of laundry, on the inlet water tempera-
    ture and on the ambient temperature.
    CONSUMPTION VALUES
    Programme1)Energy consumption
    (KWh)2)Water consumption
    (litre)2)
    White Cottons 90 °C2.2065
    Cottons 60 °C1.4062
    Cottons 40 °C0.9062
    electrolux 21
     
    						
    							Programme1)Energy consumption
    (KWh)2)Water consumption
    (litre)2)
    Synthetics 40 °C0.4844
    Delicates 40 °C0.5558
    Wool/ Handwash 30 °C0.2552
    1) Refer to the display for the programme time.
    2) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type
    of laundry, on the temperature of the water supply and on the ambient temperature.
    Standard programmes for the Energy
    Label consumption values
    The cotton 60 °C economy and cotton 40
    °C economy are the standard cotton pro-
    grammes for normally soiled cotton laundry.
    They are suitable to clean normally soiled
    cotton laundry and they are the most effi-
    cient programmes in terms of combinedenergy and water consumption for washing
    that type of cotton laundry.
    They agree with EN60456.
    The actual water temperature may dif-
    fer from the declared cycle tempera-
    ture.
    INSTALLATION
    UNPACKING
    All transit bolts and packing must be re-
    moved before using the appliance.
    You are advised to keep all transit devices
    so that they can be refitted if the machine
    ever has to be transported again.
    1. After removing all the packaging, care-
    fully lay machine on it’s back to remove
    the polystyrene base from the bottom.2. Remove the power supply cable and
    the draining and inlet hose from the
    hose holders on the rear of the appli-
    ance.
    3. Unscrew the three bolts.
    1 2
    22 electrolux
     
    						
    							4. Slide out the relevant plastic spacers.
    5. Open the porthole and remove the pol-
    ystyrene block fitted on the door seal.
    6. Fill the smaller upper hole and the two
    large ones with the corresponding plas-
    tic plug caps supplied in the bag con-
    taining the instruction booklet.
    POSITIONING
    Install the machine on a flat hard floor.
    Make sure that air circulation around the
    machine is not impeded by carpets, rugs
    etc. Check that the machine does not
    touch the wall or other kitchen units. Level
    the washing machine by raising or lowering
    the feet. The feet may be tight to adjust as
    they incorporate a self locking nut, but the
    machine MUST be level and stable. If nec-
    essary, check the setting with a spirit level.
    Any necessary adjustment can be made
    with a spanner. Accurate levelling prevents
    vibration, noise and displacement of the
    machine during operation.
    Caution! Never place cardboard,
    wood or similar materials under the
    machine to compensate for any
    unevenness in the floor.
    RUBBER FEET KIT (4055126249)
    Available from your authorized dealer.
    The rubber feet are particularly recommen-
    ded on floating, slippery and wooden floors.
    Mount the rubber feet to prevent vibration,
    noises and displacement of the appliance
    during operation.
    Read carefully the instructions supplied with
    the kit.
    WATER INLET
    Warning! This appliance must be
    connected to a cold water supply.
    1. Connect the water inlet hose supplied
    with the machine to a tap with a 3/4
    thread. Always use the hose supplied
    with the appliance.
    Important! Do not use the hose from
    your previous machine to connect to
    the water supply.
    electrolux 23
     
    						
    							2. The other end of the inlet hose which
    connects to the machine can be turned
    as showed in the picture.
    Do not place the inlet hose downwards.
    Angle the hose to the left or right de-
    pending on the position of your water
    tap.
    45°
    35°
    3. Set the hose correctly by loosening the
    ring nut. After positioning the inlet hose,
    be sure to tighten the ring nut again to
    prevent leaks.
    The inlet hose must not be lengthened. If it
    is too short and you do not wish to move
    the tap, you will have to purchase a new,
    longer hose specially designed for this type
    of use.
    Important! Before connecting up the
    machine to new pipework or to pipework
    that has not been used for some time, run
    off a reasonable amount of water to flush
    out any debris that may have collected in
    the pipes.
    WATER DRAINAGE
    The end of the drain hose can be posi-
    tioned in three ways.•Hooked over the edge of a sink using
    the plastic hose guide supplied with the
    machine. In this case, make sure the end
    cannot come unhooked when the ma-
    chine is emptying. This could be done by
    tying it to the tap with a piece of string or
    attaching it to the wall.
    •In a sink drain pipe branch. This
    branch must be above the trap so that
    the bend is at least 60 cm above the
    ground.
    •Directly into a drain pipe at a height of
    not less than 60 cm and not more than
    90 cm. The end of the drain hose must
    always be ventilated, i.e. the inside diam-
    eter of the drain pipe must be larger than
    the outside diameter of the drain hose.
    The drain hose must not be kinked.
    The drain hose may be extended to a maximum of 4 metres. An additional drain hose
    and joining piece is available from your local Service Centre.
    24 electrolux
     
    						
    							ELECTRICAL CONNECTION
    Information on the electrical connection is
    given on the rating plate on the inner edge
    of the appliance door.
    Check that your domestic electrical installa-
    tion can take the maximum load required,
    also taking into account any other applian-
    ces in use.
    Connect the machine to an earthed
    socket.
    The manufacturer does not accept
    any responsibility for damage orinjury through failure to comply
    with the above safety precaution.
    The power supply cable must be
    easily accessible after installing the
    machine.
    Should the appliance power supply
    cable need to be replaced, this
    must be carried out by a Service
    Centre.
    ENVIRONMENT CONCERNS
    The symbol  on the product or on its
    packaging indicates that this product may
    not be treated as household waste. Instead
    it should be taken to the appropriate
    collection point for the recycling of electrical
    and electronic equipment. By ensuring this
    product is disposed of correctly, you will
    help prevent potential negative
    consequences for the environment and
    human health, which could otherwise be
    caused by inappropriate waste handling of
    this product. For more detailed information
    about recycling of this product, please
    contact your local council, your household
    waste disposal service or the shop where
    you purchased the product.
    PACKAGING MATERIALS
    The materials marked with the symbol 
    are recyclable.
    >PEPSPP
    						
    							electrolux 27
     
    						
    							132930970-A-432011
     www.electrolux.com/shop
       
     
    						
    All Electrolux manuals Comments (0)

    Related Manuals for Electrolux Ewf 127570 W User Manual