Electrolux Ewf 106410 W User Manual

water level is too high. In any case, do not try
to force the door!
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to O . After a few mi-
nutes the door can be opened (pay atten-
tion to the water level and tempera-
ture!) .
After closing the door, it is necessary to se-
lect the programme and options again and to
press button 8 .
At the end of the programme
The machine stops automatically. Three
blinking 0.00 appear on the display and...

Ball point pen and glue: moisten with ace-
tone1), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid, then
rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
1) , then with ace-
tic acid; treat any residual marks on white
fabrics with...

Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
 COTTONS
95°- Cold
Main wash - Rinses
Maximum spin speed 1000/1200/1400 rpm
1)
Max. load 6 kg - Reduced load 3 kg
For white and coloured cotton (normally soiled
items).
SPIN REDUCTION,
RINSE HOLD , NIGHT
CYCLE , PREWASH ,
EXTRA RINSE , TIME
MANAGER 
2)
 3)
 SYNTHETICS
60°- Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 3 kg -...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
 LINGERIE
40°- Cold
Main wash - Rinses
Maximum spin speed 900/1000 rpm
1)
Max. load 1 kg
This programme is suitable for very delicate items such
a lingerie, bras and underwear.
SPIN REDUCTION,
RINSE HOLD , NIGHT
CYCLE
 RINSE
Rinse - Long spin
Maximum spin speed 1000/1200/1400 rpm 
1)
Max. load 6 kg
With this programme it is possible to rinse and spin cot-
ton...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
 JEANS
60°- Cold
Main wash - Rinses
Maximum spin speed 900/1000/1200 rpm
Max. load 3 kg
With this programme it is possible to wash items like
pants, shirts or jackets in denim and also jersey realized
with hi-tech materials (the Extra Rinse option will be ac-
tivated automatically).SPIN REDUCTION,
RINSE HOLD , NIGHT
CYCLE, PREWASH 3)
 SPORT INTENSIVE
40°- Cold...

To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash pro-
gramme.
• Use a normal measure of detergent, must
be a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance
with soap and water only, and then dry thor-
oughly.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
Cleaning the dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
The washing...

Door seal
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
Drain pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise dur-
ing draining due to objects such as safety
pins, coins etc. blocking the pump.
• a problem with water draining is detected
(see chapter “What to do if...” for more de-
tails).
Warning! Before opening the pump
door, switch the...

8. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
9. Put the cap back on the emergency
emptying hose and place the latter back
in its seat.
10. Replace the filter into the pump by in-
serting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
11. Close the pump door.
Warning!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump....

4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some water
may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine and
make sure the connection is tight.
8. Turn on the water tap.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
1. pull out the plug from the power socket;2. close the water tap;
3. if necessary, wait until the water...

ery 20 seconds to indicate that the machine
is not working:
•
 : problem with the water supply.
•
 : problem with the water draining.
•
 : door open.Once the problem has been eliminated,
press the button 8 to restart the programme.
If after all checks, the problem persists, con-
tact your local Service Centre.
ProblemPossible cause/Solution
The washing machine does not start:
The door has not been closed. • Close firmly the door.
The plug is not properly inserted in the power
socket.
• Insert the plug...