Electrolux Ewf 10470 W User Manual
Have a look at the manual Electrolux Ewf 10470 W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
use electrolux 11 Press the Spin button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Maximum speeds are: EWF 10470 W ●for cotton and jeans: 1000 rpm; ●for synthetics, wool, handwash and lingerie: 900 rpm; ●for delicate fabrics and silk: 700 rpm. EWF 12470 W ●for cotton and jeans: 1200 rpm; ●for synthetics, wool, handwash, lingerie and jeans: 900 rpm; ●for delicate fabrics, silk and soak: 700 rpm. EWF 14470 W ●for cotton: 1400; ●for synthetics, wool, handwash, lingerie and jeans: 900 rpm; ●for delicate fabrics, silk and soak: 700 rpm. Night Cycle :by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selectionned at night or in times with a more economical power rate. On cotton, synthetic , delicates, silk and jeans programmes the rinses will be performed with more water. When the programme has finished, the display shows a 0.00flashing, the pilot light (Door) is on, the Start/Pause light is off and the door is locked to indicate that the water must be emptied out. To empty out the water: ●turn the programme selector dial to O ●select the (Drain), (Spin) or (Delicate Spin) programme ●reduce the spin speed if needed, by means of the relevant button ●depress Start/Pause button ●at the end of the programme, the display shows a 0.00flashing and the pilot light (Door) goes out. Rinse Hold :by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a 0.00flashing, the pilot light (Door) is on, the Start/Pause light is off and the door is locked to indicate that the water must be emptied out. To empty out the water, please read the previous option steps. Select the Easy iron option Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional rinses. This function can be used for cotton, synthetic and jeans fabrics. If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm. The Easy ironcan not be selected with Night Cycle programme. 132979220.qxd 30/08/2006 12:03 Pagina 11
12electroluxuse Select the Extra Rinse option This button can be selected with all programmes except the wool, hand wash, lingerie and jeans programmes. The machine performs some additional rinses. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. Select the Delay start Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay. The relevant light will illuminate. The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again. You must select this option after you have set the programme and before you press the Start/Pausebutton. If you wish to add laundry in the machine during the delay time you will press Start/Pause button to put the ()! machine in pause. Add the laundry, close the door and press Start/Pause button again. You can cancel the delay time at any moment, before you press the Start/Pause button. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button. Selecting the delayed start. Select the programme and the required options. Select the delay start. Depress Start/Pause button: the machine starts its hourly countdown. The programme will start after the selected delay has expired. Cancelling the delayed start Depress Start/Pause button. Depress Delay Start button once until the symbol 0’is displayed. Depress Start/Pause button again. The Delay Start can not be selected with Drain programme. 132979220.qxd 30/08/2006 12:03 Pagina 12
use electrolux 13 Display The display shows the following information: Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute. Washing programme phase icons By selecting the wash programme, the washing programme phase icons corresponding to the various phases making up the programme are shown in the bottom of the display. After the machine has started, only the running icon stays on. When the programme has finished, a flashing zero ( 0.00) is displayed. Delayed start The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed. The delay time value decreases by one unit every hour and then, when 1 hours remain, the time decreases every minute. Incorrect option selection If an option which is not compatible with the set wash programme is selected, the message Erris displayed for about 2 seconds and the integrated red Start/Pause light start flashing. Alarm codes In the event of operating problems, some alarm codes can be displayed, for example E20(see paragraph “Something not working”). 132979220.qxd 30/08/2006 12:03 Pagina 13
14electroluxuse End of programme When the programme has finished a flashing zero is displayed, the “door” pilot light and the Start/Pause light go out and the door can be opened. Heating phase During the washing cycle the display shows a temperature icon to indicate that the appliance has started the heating phase of the water in the tub. Select the Start/Pause To start the selected programme, press the Start/Pausebutton; the green pilot light stops flashing. The “door” pilot light illuminates to indicate that the appliance starts operating and the door is locked. The “door” pilot light indicates if the door can be opened: light on: the door cannot be opened. The appliance is running. light off: the door can be opened. The washing programme is finished. To interrupt a programme which is running, depress the Start/Pause button: the green pilot light starts to flash. To restart the programme from the point at which it was interrupted, pressthe S St ta ar rt t/ /P Pa au us se e button again. If you have chosen a delayed start, the machine will begin the countdown. If an incorrect option is selected, an integrated redpilot light of the Start/ Pause button flashes for 3 times the message Erris displayed for about 2 seconds. 132979220.qxd 30/08/2006 12:04 Pagina 14
useelectrolux 1515electroluxcolumns and margins Select the “Time Manager” option This function allows you to modify the washing time, automatically proposed by the washing machine. By pressing the “Time Manager” button repeatedly, the duration of the washing cycle can be increased or decreased. A soil level icon will appear on the display to indicate the choosen degree of soil. (*) Max. load for cotton: 3 kg. Max. load for synthetic and delicate: 2 kg. Attention! The “Time Manager” option cannot be selected with the Ecocottons programmes. The availability of these soil level icons change according to the type of fabric as shown in the chart. Altering an option or a running programme It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button. (Only the Time Manager option cannot be modified after the programme has started. ) Changing a running programme is possible only by resetting it. Turn the programme selector dial to Oand then to the new programme position. The washing water in the tub will not emptied out. Start the new programme by depressing the Start/Pause button again. Interrupting a programme Depress the Start/Pausebutton to interrupt a programme which is running, the corresponding light starts to flash. Depress the button again to restart the programme.Soil LevelIconType of fabric IntensiveFor heavy soiled items NormalFor normal soiled items DailyFor daily soiled items LightFor slightly soiled items QuickFor very slightly soiled items Super Quick (*)For items used or worn for a short time FabricSoil Level CottonsIntensiveNormalDailyLightQuickS. Quick 95°CXXXXXX 60°CXXXXXX 40°CXXXXXX 30°CXXXXXX (cold)XXXXXX Synthetics Delicates 60°CXXXX 40°CXXXX 40°CXXXX 30°CXXXX 30°CXXXX (cold)XXXX (cold)XXXX 132979220.qxd 30/08/2006 12:04 Pagina 15
16electroluxuse Cancelling a programme Turn the selector dial to Oto cancel a programme which is running. Now you can select a new programme. Opening the door after the programme has started First set the machine to pause by pressing the Start/Pause button. If the “door” light goes off, the door can be opened. If the “door” light does not goes off, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. In this case the door can not be opened. If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to O. After about 3 minutes the door can be opened (pay attention to the water level and temperature!). At the end of the programme The machine stops automatically and a flashing “ 0.00” will appear on the. If the Rinse Hold” or Night Cycle options have been selected, the “door” pilot light illuminates, a flashing “ 0.00” will appear on the display, the Start/Pause light goes off and the door remains locked to indicate that the water must be emptied out before opening the door. To empty out the water please read the steps on the Night Cycle option paragraph. Turn the programme selector dial to “O”to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. 132979220.qxd 30/08/2006 12:04 Pagina 16
Washing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures Before loading the laundry Never wash whites and coloureds together. Whites may lose their “whiteness” in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Treat curtains with special care. Remove hooks or tie them up in a bag or net. Maximum loads Recommended loads are indicated in the programme charts. General rules: Cotton, linen:drum full but not too tightly packed; Synthetics:drum no more than half full; Delicate fabrics and woollens:drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size. Laundry weights The following weights are indicative: Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood:treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. 95° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear). 30°-40° (cold) for delicate items (e.g. net curtains), mixed laundry including synthetic fibres and woollens bearing the label «pure new wool, machine washable, non-shrink». 1200 gbathrobe 100 gnapkin 700 gquilt cover 500 gsheet 200 gpillow case 250 gtablecloth 200 gtowelling towel 100 gtea cloth 200 gnight dress 100 gladies’ briefs 600 gman’s work shirt 200 gman’s shirt 500 gman’s pyjamas 100 gblouse 100 gmen’s underpants washing hintselectrolux 17 132979220.qxd 30/08/2006 12:04 Pagina 17
18electroluxwashing hints Oil based paint:moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains:moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust:oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains:treat with bleach, rinse well (whites and fast coloureds only). Grass:soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue:moisten with acetone (*), lay the garment on a soft cloth and dab the stain. Lipstick:moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. Ink:depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains:first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk.Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: powder detergents for all types of fabric, powder detergents for delicate fabrics (60°C max) and woollens, liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just beforestarting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. 132979220.qxd 30/08/2006 12:04 Pagina 18
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer. Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. Follow the product manufacturers’ instructions on quantities to use. Use less detergent if: you are washing a small load, the laundry is lightly soiled, large amounts of foam form during washing. Degrees of water hardness Level Degrees German °dHFrench °T.H.Characteristic 10-70-15soft 28-1416-25medium 315-2126-37hard 4> 21 > 37very hard washing hintselectrolux 19 132979220.qxd 30/08/2006 12:04 Pagina 19
20electrolux International wash code symbol International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Delicate washMax. wash temperature 95°CMax. wash temperature 60°CMax. wash temperature 40°CMax. wash temperature 30°C Hand wash Do not wash at all BleachingBleach in cold water Do not bleach IroningHot iron max 200°CWarm iron max 150°CLukewarm iron max 110°CDo not iron Dry cleaningDry cleaning in all solventsDry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113Dry cleaning in petrol, pure alcohol and R 113Do not dry clean DryingFlat On the line On clothes hangerTumble dry high temperature low temperature Do not tumble dry 132979220.qxd 30/08/2006 12:04 Pagina 20