Electrolux Ewf 10240 W User Manual

consumption value electrolux  31
(*) The consumption data shown on this
chart is to be considered purely
indicative, as it may vary depending
on the quantity and type of laundry,
on the inlet water temperature and
on the ambient temperature. It refers
to the highest temperature for each
wash programme.(**) The “Cottons 60°  ” with a load of
5 kg is the reference programme for
the data entered in the energy label,
in compliance with EEC 92/75
standards.
Cottons 60°+1,3564
Cottons 95°+2,0568
Cottons...

32electrolux installation
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew...

installationelectrolux  33
6. Open the porthole, take out the inlet
hose from the drum and remove the
polystyrene block fitted with the
adhesive tape on the door seal.
7. Fill the smaller upper hole and the two
large ones with the corresponding
plastic plug caps supplied in the bag
containing the instruction booklet.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets,
rugs etc. Check that the machine does
not touch the wall or...

34electrolux installation
After positioning the inlet hose, be
sure to tighten the ring nut again to
prevent leaks.
4. Connect the hose to a tap with a 3/4”
thread. Always use the hose supplied
with the appliance. The inlet hose
must not be lengthened. If it is too
short and you do not wish to move
the tap, you will have to purchase a
new, longer hose specially designed
for this type of use.
The inlet hose must not be lengthened. If
it is too short and you do not wish to
move the tap, you will have to...

installationelectrolux  35
Electrical connection
This machine is designed to operate on
a 220-230 V, single-phase, 50 Hz
supply.
Check that your domestic electrical
installation can take the maximum load
required (2.2 kW), also taking into
account any other appliances in use.
Connect the machine to an earthed
socket. 
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution. Should the appliance
power supply cable need to be
replaced,...

36electroluxenvironment concerns
Environment concerns
Packaging materials
The materials marked with the symbol
are recyclable.
>PEPSPP

guarantee conditionselectrolux37
European guarantee
This appliance is guaranteed by
Electrolux, in each of the countries listed
in the following page, for the period
specified in the appliance guarantee or
otherwise by law. If you move from one
of these countries to another of these
countries the appliance guarantee will
move with you subject to the following
qualifications:
●The appliance guarantee starts from
the date you first purchased the
appliance which will be evidenced
by production of a valid...

38electroluxcustomer service centres
Customer Service Centres
Should you need further assistance please contact your local Customer Service
Centre
www.electrolux.com
à
Albania+35 5 4 261 450Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/Belgien+32 2 363 04 44Bergensesteenweg 719, 1502 Lembeek
Česká republika+420 2 61 12 61 12Budějovická 3, Praha 4, 140 21
Danmark+45 70 11 74 00Sjællandsgade 2, 7000 Fredericia
Deutschland+49 180 32 26 622Muggenhofer Str. 135, 90429 Nürnberg
Eesti+37 2 66 50 030Mustamäe...

132981522.qxd  09/03/2007  14.57  Pagina  39
 

132 981 522-02-082007
132981522.qxd  09/03/2007  14.57  Pagina  40