Electrolux Ew 1289 W Manual
Have a look at the manual Electrolux Ew 1289 W Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH 21 Drying 2.7 kg of cotton You have for example just machine-washed and spun at 1200 rpm 5.5 kg of laundry. They are cotton fabrics of medium weight which you want to iron as soon as they are dry. Press the SKIP/RESET button repeatedly to erase the programme that has just been carried out, the display will show 3 dashes and switch the machine off by depressing ON/OFF button. Then remove the laundry from the appliance and divide the items to obtain two loads of approx. 2.7 kg each. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 1.Load the laundry 2.Depress the ON/OFF button to switch the machine on, the display will show 3 dashes. 3.If you wish to carry out the electronic drying, depress AUTO DRY button until the light IRON DRY illuminates. If you want a timed drying, depress the DRYING TIME button until the light COTTONS lights up, then depress the same button until the time you want appears on the display. 4.Press the START/PAUSE button to start the programme. 5.At the end of the programme press SKIP/RESET button to clear the memory and switch the machine off by depressing ON/OFF button. 6.Remove the laundry. Autodrying 2 kg of synthetics You intend to wash and dry automatically 2 kg of synthetics which do not need ironing. Do not use a dosing device/ball when carrying out a washing & drying programme. 1.Load the laundry. 2.Add detergent and additive. 3.Switch the machine on by depressing the ON/OFF button. 4.Select the wash programme/fabric and temperature. 5.Select eventually the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy. In any case the reduction of the spin speed is only possible after selecting drying. The lowest values you can select are the following: - 900 r.p.m. for cottons & synthetics with electronic drying - 900 r.p.m. for cottons and 700 r.p.m. for synthetics with timed drying 6.Select the drying time or degree of drying. 7.Start the programme by depressing the START/PAUSE button. 8.At the end of the programme, turn the selector dial to RESET Oand press the ON/OFF button again to switch the machine off. 9.Remove the laundry. 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 21 (Nero/Process Black pellicola)
22 Washing programmes *This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. **This programme at 60°C with a load of 5.5 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.Wash Programme SPIN SPEED RINSE HOLD PREWASH AA40° QUICK WASH SPIN SPEED RINSE HOLD PREWASH AA40° QUICK WASH SPIN SPEED RINSE HOLD PREWASH AA40° QUICK WASH SPIN SPEED RINSE HOLD PREWASH QUICK WASH SPIN SPEED RINSE HOLD SPIN SPEED RINSE HOLD Cottons (Whites) Beyazlar Cottons ** (Coloureds) Beyazlar Synthetic fabrics Sentetikler Delicate fabrics Narin Çamasýrlar Wool Yünlüler Hand wash 5.5 kg 5.5 kg 3 kg 3 kg 2 kg 2 kg Max Load Temp.Additional options 1.95 1.13 1.00 0.55 0.40 0.4051 48 55 60 63 632.39 2.15 1.36 1.07 58 58 Consumption* Energy kWh Water litresTime h/min. 60°-95° 60 °-40°- 30° COLD SOGUK 60 °-40°- 30° COLD SOGUK 40 °-30°- COLD SOGUK 40 °-30°- COLD SOGUK 40 °-30°- COLD SOGUK Fabrics Cotton fabrics, e.g. sheets, tablecloths, household linen Coloured cotton or linen items, e.g. shirts, blouses, underwear, towels, household linen Synthetic or mixed fabrics,e.g. shirts blouses, underwear Acrylic fabrics, viscose, polyester, synthetic blends Wool marked pure new wool, wash- able, preshrunk Wool mixtures, silk Washing programmes 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 22 (Nero/Process Black pellicola)
ENGLISH 23 Drying programmes Timed drying Degree of drying Store dry Suitable for items to put away without ironingType of fabric Cotton and linen (towels, T-shirts, bathrobes)Max. load 2.7 kgSpin speed 1200Drying time mins 75-85 1.5 kg 1200 45-55 Synthetics and mixed fabrics (jumpers, blouses, underwear, household linen)2 kg 900 70-80 1 kg 900 35-45 Iron dry Suitable for ironing Cotton and linen (sheets, tablecloths, shirts, etc.)2.7 kg 1200 55-65 1.5 kg 1200 40-50 Extra dry Ideal for towelling materialsCotton and linen (bathrobes, bath towels, etc.)2.7 kg1200 85-95 1.5 kg 1200 55-65 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 23 (Nero/Process Black pellicola)
24 International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. i Energetic wash Delicate washMax. wash temperature 95°CMax. wash temperature 60°CMax. wash temperature 40°CMax. wash temperature 30°C Hand wash Do not wash at all BleachingBleach in cold water Do not bleach IroningHot iron max 200°CWarm iron max 150°CLukewarm iron max 110°CDo not iron Dry cleaningDry cleaning in all solventsDry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113Dry cleaning in petrol, pure alcohol and R 113Do not dry clean DryingFlat On the line On clothes hangerTumble dry high temperature low temperature Do not tumble dry 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 24 (Nero/Process Black pellicola)
ENGLISH Maintenance 25 1. Bodywork Clean the outside of the machine with warm water and a detergent used to handwash dishes. Rinse with clean water and dry with a soft cloth. Important:do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits in the drawer. Clean the drawer from time to time by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner. To facilitate cleaning, the top part of the additive compartments can be removed. Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning. 3. Drain pump The pump should be inspected if • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: • Disconnect the appliance. • If necessary wait until the water has cooled down. • Open the pump door. • Place a container close to the pump to collect any spillage. • Release the emergency emptying hose, place it in the container and remove its cap. • When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump. • Remove any objects from the pump impeller by rotating it. 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 25 (Nero/Process Black pellicola)
6. Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: • Remove the plug from the socket. • Close the water tap and unscrew the water inlet hose from the tap. • Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. • Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. By doing this, any water remaining in the machine is removed, avoiding the formation of ice and, consequently, breakage of the affected parts. When you use the machine again, make sure that the ambient temperature is above 0°C. 26 • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump fully in. • Close the pump door. 4. Water inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap. 5. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessary, wait until the water has cooled down; • open the the pump door; • place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. Whe the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; • clean the pump if necessary as previously described; • replace the emergency emptying hose in its seat after having plugged it; • screw the pump again and close the door. 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 26 (Nero/Process Black pellicola)
ENGLISH 27 Something not working? Problem Possible cause • The machine does not start up:• The door is not firmly closed.(E40) • The machine is not plugged in or there is no power at the socket. • The main fuse or the fuse in the plug has blown. • The START/PAUSE button has not been depressed. • The DELAY START option has been selected. • The machine does not fill:• The water tap is closed. (E10) • The inlet hose is squashed or kinked. (E10) • The filter in the inlet hose is blocked. (E10) • The door is not properly closed. (E40) • The machine fills then empties immediately:• The end of the drain hose is too low. Refer to relevant paragraph in “water drainage” section. • The machine does not empty and/or does not spin:• The drain hose is squashed or kinked. (E20) • The option RINSE HOLDhas been selected. • The drain filter is clogged. (E20) • There is water on the floor:• Too much detergent or unsuitable detergent (creates too much foam) has been used. • Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. • The drain hose is damaged. • Unsatisfactory washing results:• Too little detergent or unsuitable detergent has been used. • Stubborn stains have not been treated prior to washing. • The correct temperature was not selected. • Excessive laundry load. • The machine vibrates or is noisy:• The transit bolts and packing have not been removed. • The support feet have not been adjusted. • The laundry is not evenly distributed in the drum. • Maybe there is very little laundry in the drum. • The door will not open:• The water level is above the bottom edge of the door. • The machine is heating the water or drying clothes. • The drum is turning. The door can only be opened when the relevant light has gone out. Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display: -E10: problem with the water supply -E20 : problem with water draining -E40: door open Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local Service Centre. 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 27 (Nero/Process Black pellicola)
28 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Problem Possible cause • Spinning starts late or the laundry is not spun enough: • The machine will not dry or the laundry is not dry enough• The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 15 minutes, the laundry is still not evenly distributed in the drum, the machine will spin at a lower speed. If at the end of the programme the laundry is not spun enough, redistribute the load manually and select the spin programme. • The water tap is closed (E10). • The drain filter is clogged (E20). • The drying time or degree of dryness has not been selected. • An appropriate drying time or degree of dryness has not been chosen. • There is too much laundry inside the appliance. 132991030 EW1289W.qxd 08/07/2003 13:34 Pagina 28 (Nero/Process Black pellicola)