Home > Electrolux > Dishwasher > Electrolux Esl 43020 User Manual

Electrolux Esl 43020 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Electrolux Esl 43020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 208 Electrolux manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							For better drying results, keep the ap-
    pliance door ajar for some minutes.
    Remove the items from the baskets
    • Let the dishes become cold before you
    remove them from the appliance. Hot
    dishes can be easily damaged.• First remove the items from the lower
    basket, then from the upper basket.
    • There can be water on the sides and on
    the door of the appliance. Stainless steel
    becomes cool more quickly than the
    dishes.
    WASHING PROGRAMMES
    ProgrammeType of soilType of loadProgramme description
    Heavy soilCrockery, cutlery,
    pots and pansPrewash
    Wash 70 °C
    Rinses
    Dry
    Normal soilCrockery and cutleryPrewash
    Wash 65 °C
    Rinses
    Dry
     1)Fresh soilCrockery and cutleryWash 60 °C
    Rinse
     2)Normal soilCrockery and cutleryPrewash
    Wash 50 °C
    Rinses
    Dry
    Use this programme to quickly rinse the
    dishes. This prevents the remaining food
    to bond on the dishes and bad odours to
    come out from the appliance.
    Do not use detergent with this pro-
    gramme.Rinse
    1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
    2) This is the standard programme for test institutes. With this programme you have the most efficient use of water
    and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
    Consumption values
    ProgrammeProgramme time (mi-
    nute)Energy (kWh)Water (litre)
    110 - 1201,5 - 1,718 - 20
    100 - 1101,4 - 1,518 - 20
    300,88
    120 - 1300,8 - 0,912 - 13
    110,015
    The water pressure and temperature,
    the variations of the mains supply andthe quantity of dishes can change the
    consumption values.
    electrolux 11
     
    						
    							CARE AND CLEANING
    To remove and clean the filters
    Dirty filters decrease the washing results.
    Although the maintenance is very low with
    these filters, make a check at intervals and
    if necessary, clean them.
    1. Turn the filter (A) counterclockwise and
    remove it out from filter (B).
    A
    B
    2. Filter (A) has two parts. To disassemble
    the filter, pull them apart.
    3. Fully clean the parts with water.
    4. Put the two parts of the filter (A) togeth-
    er and push. Make sure that they en-
    gage correctly in each other.
    5. Remove the filter (B).
    6. Fully clean the filter (B) with water.
    7. Put the filter (B) to its initial position.
    Make sure that it engages correctly in
    the two guides (C).
    C
    8. Put the filter (A) into position in filter (B).
    Turn the filter (A) clockwise until it locks.
    To clean the spray arms
    Do not remove the spray arms.
    If the holes in the spray arms become clog-
    ged, remove remaining parts of soil with a
    thin pointed object.
    To clean the external surfaces
    Clean the external surfaces of the appliance
    and control panel with a moist soft cloth.
    Only use neutral detergents.
    Do not use abrasive products, abrasive
    cleaning pads or solvents (acetone).
    WHAT TO DO IF…
    The start of the appliance does not occur or
    it stops during operation.
    First try to find a solution to the problem (re-
    fer to the table). If not, contact the service
    centre.With some malfunctions the indicators
    flash to show an alarm code.
    Alarm codeMalfunction
    • The programme indicator flashes continuously.
    • The end indicator flashes one time intermittently.The appliance does not fill with water.
    12 electrolux
     
    						
    							Alarm codeMalfunction
    • The programme indicator flashes continuously.
    • The end indicator flashes two times intermittently.The appliance does not drain the water.
    • The programme indicator flashes continuously.
    • The end indicator flashes three times intermittently.The anti-flood device is on.
    Warning! Deactivate the appliance
    before you do the checks.
    MalfunctionPossible causePossible solution
    The appliance does not fill with
    water.The water tap is blocked or
    there is limescale on it.Clean the water tap.
     The water pressure is too low.Contact your local water au-
    thority.
     The water tap is closed.Open the water tap.
     The filter in the water inlet hose
    is blocked.Clean the filter.
     The connection of the water in-
    let hose is not correct.Make sure that the connection
    is correct.
     The water inlet hose is dam-
    aged.Make sure that the water inlet
    hose has no damages.
    The appliance does not drain
    the water.There is a blockage in the sink
    spigot.Clean the sink spigot.
     The connection of the water
    drain hose is not correct.Make sure that the connection
    is correct.
     The water drain hose is dam-
    aged.Make sure that the water drain
    hose has no damages.
    The anti-flood device is on. Close the water tap and con-
    tact the service centre.
    The start of the washing pro-
    gramme does not occur.The appliance door is open.Close the appliance door.
     The mains plug is not connec-
    ted in the mains socket.Connect the mains plug.
     The fuse in the fuse box is
    damaged.Replace the fuse.
    After the check, activate the appliance. The
    programme continues from the point of in-
    terruption.
    If the malfunction occurs again, contact the
    service centre.
    If the different alarm codes show, contact
    the service centre.
    The necessary information for the service
    centre is on the rating plate.Record this information:
    –Model
    (MOD.) ....................................................
    ....
    – Product number
    (PNC) ..........................................
    – Serial number
    (S.N.) ..............................................
    The washing results and drying results are not satisfactory
    ProblemPossible causePossible solution
    The dishes are not clean.The selected washing pro-
    gramme was not applicable for
    the type of load and soil.Make sure that the washing
    programme is applicable for the
    type of load and soil.
    electrolux 13
     
    						
    							ProblemPossible causePossible solution
     The baskets were not loaded
    correctly, water did not touch
    all surfaces.Load the baskets correctly.
     The spray arms could not turn
    freely because of incorrect ar-
    rangement of the load.Make sure that an incorrect ar-
    rangement of the load does not
    cause a blockage of the spray
    arms.
     The filters are dirty or not as-
    sembled and installed correctly.Make sure that the filters are
    clean and correctly assembled
    and installed.
     The quantity of detergent was
    not sufficient or missing.Make sure that the quantity of
    detergent is sufficient.
    Limescale particles on the
    dishes.The salt container is empty.Fill the salt container with dish-
    washer salt.
     Incorrect water softener adjust-
    mentAdjust the water softener.
     The salt container cap is not
    closed correctly.Make sure that the salt contain-
    er cap is closed correctly.
    There are streaks, milky stains,
    or a bluish layer on glasses and
    dishes.Rinse aid dosage is too high.Decrease the rinse aid dosage.
    Dry water drop stains on
    glasses and dishes.Rinse aid dosage is too low.Increase the rinse aid dosage.
     The detergent can be the
    cause.Use a different brand of deter-
    gent.
    The dishes are wet.You have set a washing pro-
    gramme without drying phase
    or with a decreased drying
    phase.Let the door stay ajar for some
    minutes before you remove the
    dishes.
    The dishes are wet and dull.The rinse aid dispenser is emp-
    ty.Fill the rinse aid dispenser with
    rinse aid.
    TECHNICAL DATA
    DimensionsWidth446 mm
     Height818 - 898 mm
     Depth550 mm
    Water supply pressureMinimum0,5 bar (0,05 MPa)
     Maximum8 bar (0,8 MPa)
    Water supply 1)Cold water or hot watermaximum 60 °C
    CapacityPlace settings9
    1) Connect the water inlet hose to a water tap with a 3/4 thread.
    The rating plate on the inner edge of
    the appliance door shows the electrical
    connection data.
    If the hot water comes from alternative
    sources of energy, (e.g. solar panels,photovoltaic panels and aeolian), use a
    hot water supply to decrease energy
    consumption.
    14 electrolux
     
    						
    							ENVIRONMENT CONCERNS
    The symbol  on the product or on its
    packaging indicates that this product may
    not be treated as household waste. Instead
    it should be taken to the appropriate
    collection point for the recycling of electrical
    and electronic equipment. By ensuring this
    product is disposed of correctly, you will
    help prevent potential negative
    consequences for the environment and
    human health, which could otherwise becaused by inappropriate waste handling of
    this product. For more detailed information
    about recycling of this product, please
    contact your local council, your household
    waste disposal service or the shop where
    you purchased the product.
    Recycle the materials with the symbol 
     .
    Put the packaging in applicable containers
    to recycle it.
    electrolux 15
     
    						
    							117943791-A-502010
     www.electrolux.com/shop
       
     
    						
    All Electrolux manuals Comments (0)

    Related Manuals for Electrolux Esl 43020 User Manual