Electrolux Esl 43010 User Manual

user manual
Dishwasher
ESL 43010
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information    2
Product description    3
Control panel    4
Use of the appliance    5
Setting the water softener    5
Use of dishwasher salt    6
Use of rinse aid    7
Loading cutlery and dishes    8
Use of detergent    10
Setting and starting a washing programme
 11Washing programmes    12
Care and cleaning    13
What to do if…    14
Technical data    15
Installation    15
Water connection    16
Electrical...

• Keep all detergents in a safe area. Do not
let children touch the detergents.
• Keep children away from the appliance
when the door is open.
Installation
• Make sure that the appliance is not dam-
aged because of transport. Do not con-
nect a damaged appliance. If necessary,
contact the supplier.
• Remove all packaging before first use.
• A qualified and competent person must do
the electrical installation.
• A qualified and competent person must do
the plumbing installation.
• Do not change the...

Control panel
1On/off button
2Programme selection/cancel button (PROG. / CANCEL)
3Indicator lights
4Programme indicator lights
Indicator lights
End-of-programmeComes on when the washing programme is completed. Auxiliary
functions:
• Level of the water softener.
• Activation/deactivation of the audible signals.
• An alarm if the appliance has a malfunction.
Salt 1)Comes on when it is necessary to fill the salt container. Refer to
Use of dishwasher salt.
After you fill the container, the salt indicator...

Audible signals
You can hear an audible signal:
• At the end of the washing programme.
• When the appliance has a malfunction.
The activation of the audible signals is set at
the factory.
Do these steps to deactivate the audible sig-
nals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Press and hold the programme selection/
cancel button until programme indicator
light A flashes and programme indicator
light B comes on.
4. Press the programme selection/cancel
button...

Water hardnessWater hardness setting
°dH°THmmol/lClarkemanuallyelectronically
15 - 1826 - 322,6 - 3,218 - 2214
11 - 1419 - 251,9 - 2,513 - 1713
4 - 107 - 180,7 - 1,85 - 1212
< 4< 7< 0,7< 511)11)
1) No use of salt required.
You must set the water softener man-
ually and electronically.
Manual adjustment
The appliance is set at the factory at po-
sition 2.
1. Open the door.
2. Remove the lower basket.
3. Turn the water hardness dial to position
1 or 2 (refer to the chart).
4. Install the lower basket.
5....

4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is normal that water overflows from the
salt container when you fill it with salt.
When you set electronically the water soft-
ener to level 1, the salt indicator light does
not stay on.
Use of rinse aid
Caution! Only use branded rinse aid for
dishwashers.
Do not fill the rinse aid dispenser with
other products (e.g. dishwasher clean-
ing agent, liquid detergent). This can
cause damage...

Adjusting the rinse aid dosage
The rinse aid is set at the factory at position
4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 6
(highest dosage).1. Turn the rinse aid dial to increase or de-
crease the dosage.
– Increase the dosage if there are water
droplets or limescale on the dishes.
– Decrease the dosage if there are
streaks, whitish stains or bluish layers
on the dishes.
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for...

Cutlery basket
Warning! Do not put long-bladed knives
in a vertical position. Arrange long and
cutlery horizontally in the upper basket.
Be careful with sharp items.
Put forks and spoons with the handles down.
Put knives with the handles up.
Mix spoons with other cutlery to prevent
them to bond together.
Use the cutlery grid.
If the dimensions of the cutlery prevent use
of the cutlery grid, you can easily remove it.
Upper basket
The upper basket is for plates (maximum 24
cm in diameter), saucers, salad...

Maximum height of the dishes
 upper bas-
ketlower
basket
Upper position20 cm31 cm
Lower position24 cm27 cm
Do these steps to move the upper basket to
the upper position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper position.
4. Put back the front runner stops (A) in their
initial position.
Caution! If the basket is in the upper
position, do not put cups on the cup
racks.
Use of detergent
Only use detergents (powder, liquid or
tablet) that are applicable...