Electrolux Esf 2440 S Instruction Book

- 11 -
This appliance complies with the following E.E.C. directives:
Ð 73/23/EEC, dated 19.02.1973 Ð low-voltage directive.
Ð 89/336/EEC, dated 03.05.1989 (incl. amendment
Ð 92/31/EEC) Ð directive on electromagnetic compatibility.
Indicator for the selected programme
ßashes:
The display shows error code   , 10.
(Problems with the water supply).¥ Is the water tap turned on?
¥ Is the Þlter inside the inlet hose blocked?
¥ Is the water inlet hose kinked or squashed?
¥ Are the Þlters clogged?
Fault Check...

- 12 -
Service
Service and spare parts
Servicing and repairs must be carried out by a service
company authorised by the supplier. Use only spare
parts supplied by these. 
Before calling service, use the trouble shooting table 
ÓIn  the event of a faultÓ to try to attend to the fault yourself.
Note that electrical faults shall always be rectiÞed by a
certiÞed electrician.
State the applianceÕs model designation, product- and
serial numbers according to the data plate afÞxed to the
rear of the dishwasher....

- 13 -
Installation instructions
Any electrical work required to install this appliance,
should be carried out by a qualiÞed electrician or
competent person.
Any plumbing work required to install this appliance,
should be carried out by a qualiÞed plumber or
competent person.
Technical speciÞcations
Capacity:6 place settings accordance EN 50242
Dimensions:Height 447 mm
Width 546 mm
Depth (to the edge of the door) 480 mm
Depth (to the middle of the door) 507 mm
Weight:Net 22 kg
Water pressures:Minimum 80...

- 14 -
Unpacking
Damages
If the dishwasher has been damaged during transport,
you should immediately notify the company responsible
for delivering it.
Check that the dishwasher is undamaged. If you discover
any damage, faults or that anything is missing, you should
notify the dealer immediately.
Never leave packaging material in a place
where children may play with it.
Check that the following accessories are supplied with the
dishwasher when you unpack it:
Ð Elbow for discharge hose
Use
This dishwasher...

- 15 -
Installation
Water inlet
The dishwasher is equipped with safety features
which are to prevent the water from going back 
to the fresh water system. These features are ac-
cording to current water technical safety regulations.
The temperature of the water supply should not exceed 65¡ C
and the pressure should be between 80-1000 kPa (0,8 - 10 bar). 
It is important to have a tap or stopcock, positioned close to
the dishwasher and with easy access. Special mixer taps with
dishwasher connections are...

Technical changes possible