Eizo S1932 Users Manual

19Chapter 2  Settings and Adjustments
2-7 Locking Buttons  
[Key Lock] [Menu Lock]
This	function	allows	you	to	lock	the	operation	buttons	to	prevent	changing	the	
adjusted/set	status.
Key	Lock	:	 Locks	the	buttons	other	than	the	Power	button.
Menu	Lock	:	 	 Locks	the	buttons 	other	 than	the	Power, 	Input	 signal 	selection,	
Brightness	control,	and	 Volume	control	buttons.
(1)	 Press	
	to	turn	off	the	monitor.
(2)	 Press	
	holding		down	to	turn	on	the	monitor.
The	adjustment	menu	appears.
(3)	 Each	time...

20Chapter 2  Settings and Adjustments
2-10 Setting Power Indicator ON/OFF  
[Power LED]
This	function	allows	you	to	set	the	power	indicator	(blue)	ON/OFF	in	the	
monitor	ON	condition.
(1)	 Press	
.
The	adjustment	menu	appears.
(2)	 Select		(PowerSave).
(3)	 The	On/Off	setting	is	toggled	by	selecting	
	(Power	LED).
On
Off
(4)	 Select	.
The	mode	selected	is	set.
2-11  Setting Language [Language]
This	function	allows	you	to	select	a	language	for	the	adjustment	menu	or	
displaying	message.
Selectable...

21Chapter 2  Settings and Adjustments
2-13 Resuming the Default Setting [Reset]
There	are	two	types	of	Reset.	One	is	to	reset	the	color	adjustment	only	to	the	
default	settings,	and	the	other	is	to	reset	all	the	settings	to	the	default	settings.
●	 To reset color adjustment values
Only	the	adjustment	values	in	the	current	FineContrast	mode	will	revert	to	the	
default	settings	(factory	settings).
(1)	 Press	
.
The	adjustment	menu	appears.
(2)	 Select		(Tool).
(3)	 Select	
	(Reset).
If	you	will	not	perform...

22Chapter 3  Connecting Cables
3-1 Connecting Two PCs to the Monitor
Two	PCs	can	be	connected	to	the	monitor	through	the	DVI-D	and	the	D-Sub	
mini	15	pin	connector	on	the	back	of	the	monitor.
Connection examples
DVI-D connector D-Sub mini
15-pin Connector
D-Sub mini 15-pin Connector
DVI-D connector
Signal cable 
(Digital) FD-C39 Signal cable 
MD-C87To PC 2
To PC 1
●	
To switch the input signal
The	input	signal	switches	each	time		is	pressed.
When	the	signal	is	switched,	the	active	input	port	name	appears...

23Chapter 3  Connecting Cables
●	Setting auto-selection of the input signal [Input Signal]
Enable	 :	When	either	PC	is	turned	off	or	enters	the	power-saving	mode,	the	
monitor	automatically	displays	signals	of	another	PC.
Disable	:	The	monitor	does	not	detect	the	PC’s	signals	automatically.	Switch	an	 input	signal	with	
.
(1)	 Press	
.
The	adjustment	menu	appears.
(2)	 Select		(Tool).
(3)	 The	Enable/Disable	setting	is	toggled	by	selecting	
	(Input	Signal).
Enable
Disable
(4)	 Select	.
The	mode	selected...

24Chapter 4  Troubleshooting
Chapter 4 Troubleshooting
If	a	problem	still	remains	after	applying	the	suggested	remedies,	contact	your	local	dealer.
•	 No-picture	problems	→	See	No.1	-	No.2.
•	 Imaging	problems	(digital	input)	→	See	No.3	-	No.9.
•	 Imaging	problems	(analog	input)	→	See	No.3	-	No.12.
•	 Other	problems	→	See	No.13	-	No.15.
•	 USB	problems	→	See	No.16.
Problems Possible cause and remedy
1.  No picture
•
  Power indicator does not light. • 
Check whether the power cord is connected correctly....

25Chapter 4  Troubleshooting
ProblemsPossible cause and remedy
7.  Interference patterns or pressure marks remain on 
the screen. •
  Leave the monitor with a white or black screen. 
 The 
symptom may disappear.
8.  The outline of the letters are colored. •
  If the [Sharpness] setting is set to a high level, the 
characters displayed on the monitor may be colored.
9.   Noise appears on the screen. •

  When entering the signals of HDCP system, the normal 
images may not be displayed immediately.
10....

26Chapter 4  Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm
The	stand	can	be	removed	and	replaced	with	an	arm	(or	another	stand)	to	be	
attached	to	the	monitor.	Use	an	arm	or	stand	of	EIZO	option.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable 
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew	the	four	screws	securing	the	unit	and	the	stand	with	the	
screwdriver.
3 Attach the monitor to the arm or stand.
Secure	the...

27Chapter 5  Reference
5-2 Power Saving Mode
■ Analog input
This	monitor	complies	with	the	 VESA	DPMS	standard.
[Power Saving System]
PC MonitorPower 
Indicator
Operating OperatingBlue
Power saving STAND-BY  SUSPENDED 
OFF Power saving Orange
[Resumption Procedure]
•	 Operate	the	mouse	or	keyboard	to	resume	the	normal	screen.
■ 
Digital input 
This	monitor	complies	with	the	DVI	DMPM	standard.
[Power Saving System]
The	

monitor	enters	the	power	saving	mode	in	five	seconds	in	connection	with	
the	PC...

28Chapter 5  Reference
5-4	 Specifications
LCD Panel19-inch (480 mm) TFT color LCD with anti-glare
Viewing angle: 
 Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch 0.294mm
Horizontal Scan Frequency Analog: 24.8-80kHz
Digital: 31-64kHz
Vertical Scan Frequency Analog: 50-75Hz (Non-interlace)
Digital: 59-61Hz (Non-interlace)
(VGA TEXT: 69-71Hz)
Resolution 1280 dots × 1024 lines
Max. Dot Clock Analog: 135MHz
Digital: 108MHz
Max. Display Color Approx. 16.77 million colors
Display Area (H × V) 376.3mm...