Eizo Foris Fs2331 Users Manual

21Chapter2Adjusting Screens
 ●To adjust gamma “Gamma”
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the 
variation rate is not proportional to the input signal. To keep the balance between the input signal and the 
brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.8, 2.0, 2.2, 2.4, 2.6, 2.8, Power1, Power2
Procedure
1.
 
C
 hoose “Color” in the Setting menu, and press 
.
2.
 
C

hoose “Advanced Settings” in the “Color”...

22Chapter2Adjusting Screens
 ●To set overdrive intensity “Overdrive”
This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image 
lags by setting it to “Enhanced” when displaying animated images.
Adjustable range
Enhanced, Standard, Off
Procedure
1.
 
C
 hoose “Color” in the Setting menu, and press 
.
2.
 
C

hoose “Advanced Settings” in the “Color” menu, and press 
.
3.
 
C

hoose “Overdrive” in the “Advanced Settings” menu, and press 
.
The “Overdrive”...

23Chapter2Adjusting Screens
Setting Procedures
1. Perform the auto adjustment.
 ●To adjust flickering, screen position, and screen size automatically “Auto Screen 
Adjust”
Procedure
1.
 
C
 hoose “Screen” in the Setting menu, and press 
.
2.
 
C

hoose “Auto Screen Adjust” in the “Screen” menu, and press 
.
3.
 
Se

lect “Yes” with 
 or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function....

24Chapter2Adjusting Screens
4. Choose “Screen” from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
 ●To eliminate vertical bars “Clock”
Procedure
1.
 
C
 hoose “Clock” in the “Screen” menu, and press 
.
The “Clock” menu appears.
2. Adjust the clock with  or  to eliminate vertical bars.
Press  or  slowly so as not to miss the adjustment point.
3. Press  to exit the adjustment.
When blurring, flickering or bars appear on the screen after...

25Chapter2Adjusting Screens
 ●To correct the screen position “Position”
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to 
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1.
 
C
 hoose “Position” in the “Screen” menu, and press 
.
The “Position” menu appears.
2. Adjust the position with  /  /  / .
3.
 
P

ress 
 to exit the adjustment.
4. Close Pattern 1.
5. Adjusting...

26Chapter2Adjusting Screens
6. Modify blurred characters or lines.
 ●To modify blurred characters/lines “Smoothing”
When an image is displayed with a resolution other than recommended, the characters or lines of the 
displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable range
1 to 5
Procedure
1.
 
C
 hoose “Screen” in the Setting menu, and press 
.
2.
 
C

hoose “Smoothing” in the “Screen”...

27Chapter2Adjusting Screens
 ●Digital Input (HDMI: video signal)
The screen size can be changed with the “Screen Size” function.
Setting Function Screen Display
AutoThe  monitor  automatically  changes  the  screen 
s

ize  according  to  the  aspect  ratio  and  resolution 
i

nformation  from  the  external  device.  This  can  be  set 
o

nly  for  HDMI  (SD  Signal)  input.
Full
 Screen Displays  an  image  in  full  screen.  Images  are 
d

istorted  in ...

28Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Adjusting Volume
 ●To turn the volume up/down
This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1.
 
P
 ress 
 or  on the remote control.
Note
• Alternatively, you can use  or  on the monitor for adjustment. (see “1-2. Controls and Functions” (page 
8) ).
•
 
T

he volume for the HDMI1, HDMI2, and the stereo mini jack can be set individually.
 ●To mute the sound temporarily
Procedure
1.  
P
 ress 
 on the remote...

29Chapter3SettingMonitor
3-3. To adjust the sound level “Sound Level”
The input sound level can be adjusted.
The volume difference may occur depending on the kinds of input signals, since the average sound level of the 
external device differs.Adjustable range
-1 to 1
Procedure
1.
 
C
 hoose “Sound” in the Setting menu, and press 
.
2.
 
C

hoose “Sound Level” in the “Sound” menu, and press 
.
The “Sound Level” menu appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit the adjustment.
Note
• For...

30Chapter3SettingMonitor
3-6. Setting the EIZO Logo Display “Logo”
When the monitor is turned on, the EIZO logo appears on the screen. You can choose to display or not to 
display the EIZO logo.Procedure
1.
 
C
 hoose “Monitor Settings” in the Setting menu, and press 
.
2.
 
C

hoose “Logo” in the “Monitor Settings” menu, and press 
.
The “Logo” menu appears.
3. Select “On” or “Off ” with  or .
4.
 
P

ress 
 to exit the adjustment.
3-7. Setting Language “Language”
This function allows you to select a...