Eizo Flexscan Sx2461w Users Manual

29Chapter 5  Reference

USBStandardUSB Specification Revision 2.0 
PortUpstream port × 1, Downstream port × 2
Supply currentDownstream: Max. 500mA/1 port
SX2761W
LCD Panel27.0-inch (690 mm) TFT color LCD with anti-glare hard coatingViewing angle: Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch0.303mm
Horizontal Scan FrequencyAnalog: 24-94kHzDigital: 31-76kHz
Vertical Scan FrequencyAnalog: 49-86Hz (Non-interlace) (1600 × 1200: 49-76Hz)(1920 × 1200: 49-61Hz)Digital: 59-61Hz (Non-interlace)(VGA...

30Chapter 5  Reference

Environmental ConditionsTemperatureOperating temperature: 0 °C - 35 °C (32 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
HumidityRelative humidity: 30% - 80% (no condensation)
USBStandard
USB Specification Revision 2.0 
PortUpstream port × 1, Downstream port × 2
Supply currentDownstream: Max. 500mA/1 port
Main default settings (factory settings)
BrightRegulatorDisable
Smoothing3
FineContrast Mode Custom
PowerManager VESA DPMS (Analog Input)
DVI DMPM (Digital...

31Chapter 5  Reference

Outside Dimensions 
SX2461W
566(22.3)520.4(20.5)
85(3.35)56.3(2.22)
456~538(18.0~21.2)
35°35°
100(3.9)233(9.2)233(9.2)
133.5(5.3)
100(3.9)
40°
222.5(8.8)
12~71.5
(0.47~2.81)
190(7.5)
162.5(6.4)
230(9.1)398.5(15.7)
89~171(3.5~6.7)
367(14.4)
326(12.8)
272.5~354.5(10.7~14.0)
301.5~383.5(11.9~15.1)
33(1.3)
532(20.9)
133.5(5.3)69.8(2.75)
SWIVEL
TILT
unit : mm (inch)
Outside Dimensions
SX2761W
630(24.8)587.2(23.1)
369.2(14.5)
412(16.2)
286.5~404.5(11.3~15.9)
492.5~610.5(19.4~24.0)...

32Chapter 5  Reference

Connector Pin Assignment
•  DVI-I connector 
 123456789101112131415161920211718222324
C1C2C3C4C5
Pin No.SignalPin No.SignalPin No.Signal 
1T.M.D.S. Data 2- 11T.M.D.S. Data1/3 Shield21NC*
2T.M.D.S. Data 2+12NC*22 T.M.D.S. Clock shield
3T.M.D.S. Data2/4 Shield13NC*23 T.M.D.S. Clock+
4NC*14+5V Power24T.M.D.S. Clock-
5NC*15Ground (return for +5V, Hsync and Vsync)C1Analog Red
6DDC Clock (SCL)16Hot Plug DetectC2Analog Green
7DDC Data (SDA)17T.M.D.S. Data0-C3Analog Blue
8Analog Vertical...

33Chapter 5  Reference

5-4  Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in 
use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly , some vertical bars appear on the screen.
DVI (Digital Visual Interface) DVI is a digital interface standard. DVI allows direct transmission of the PC’ s digital data without loss.
This...

34Chapter 5  Reference
TemperatureColor temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.  The screen 
becomes reddish at a low temperature, and bluish at a high temperature, like the fl ame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling) A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display...

35Chapter 5  Reference

5-5  Preset Timing
The following table shows factory preset video timing (for analog signal only).
ModeDot clock
Frequency
PolarityHorizontal: kHz 
Vertical: Hz
VGA 640×480@60Hz
25.2 MHzHorizontal31.47Negative
Vertical
59.94Negative
VGA 720×400@70Hz
28.3 MHzHorizontal31.47Negative
Vertical
70.09Positive
Macintosh  640×[email protected] MHzHorizontal35.00Negative
Vertical
66.67Negative
Macintosh  832×[email protected] MHzHorizontal49.72Negative
Vertical
74.55Negative
Macintosh...

36Chapter 5  Reference

ModeDot clock
Frequency
PolarityHorizontal: kHz 
Vertical: Hz
VESA 1600×1200@70Hz 
189.0 MHzHorizontal87.50Positive
Vertical
70.00Positive
VESA 1600×1200@75Hz
202.5 MHzHorizontal93.80Positive
Vertical
75.00Positive
VESA CVT 
 1680×[email protected] MHzHorizontal65.29Negative
Vertical
59.95Positive
VESA CVT 1920×1200
193.3 MHzHorizontal74.56Negative
Vertical
59.89Positive
VESA CVT RB  1920×1 200154.0 MHzHorizontal74.04Positive
Vertical
59.95Negative
 

37Chapter 5  Reference
For	U.S.A.	,	Canada,	etc.	(rated	100-120	Vac)	Only
FCC Declaration of Conformity
We, the Responsible Party EIZO	NANAO	TECHNOLOGIES	INC.
5710	 Warland	Drive,	Cypress,	CA 	90630
Phone:		(562)	431-5011
declare that the product Trade	name:		EIZO
Model:		FlexScan	SX2461W/SX2761W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any...

38Chapter 5  Reference
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser	Monitor	ist	für	Bildschirmarbeitsplätze	vorgesehen.	Wenn	nicht	der	zum	Standardzubehör	gehörige
Schwenkarm	verwendet	wird,	muss	statt	dessen	ein	geeigneter	anderer	Schwenkarm	installiert	werden.	Bei	der
Auswahl	des	Schwenkarms	sind	die	nachstehenden	Hinweise	zu	berücksichtigen:
Der	Standfuß	muß	den	nachfolgenden	 Anforderungen	entsprechen:
a)	Der	 Standfuß	 muß	eine	ausreichende	 mechanische	Stabilität	zur...