Eizo Flexscan S2402w Users Manual
Have a look at the manual Eizo Flexscan S2402w Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Eizo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 42
40
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according t\
o
some of the strictest quality and environmental requirements in the worl\
d.
This makes for a high performance product, designed with the user in foc\
us
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in...](http://img.usermanuals.tech/thumb/1704/51654/w64_eizo_flexscan_s2402w-user-s-manual-41.png "Page 42
40
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according t\
o
some of the strictest quality and environmental requirements in the worl\
d.
This makes for a high performance product, designed with the user in foc\
us
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in...")
39Chapter 5 Reference 5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). ModeDot clock Frequency PolarityHorizontal: kHz Vertical: Hz VGA 640×[email protected] MHzHorizontal31.47Negative Vertical59.94Negative VGA TEXT 720×[email protected] MHzHorizontal31.47Negative Vertical70.09Positive VESA 640×[email protected] MHzHorizontal37.86Negative Vertical72.81Negative VESA 640×[email protected] MHzHorizontal37.50Negative Vertical75.00Negative VESA 800×[email protected] MHzHorizontal35.16Positive Vertical56.25Positive VESA 800×[email protected] MHzHorizontal37.88Positive Vertical60.32Positive VESA 800×[email protected] MHzHorizontal48.08Positive Vertical72.19Positive VESA 800×[email protected] MHzHorizontal46.88Positive Vertical75.00Positive VESA 1024×[email protected] MHzHorizontal48.36Negative Vertical60.00Negative VESA 1024×[email protected] MHzHorizontal56.48Negative Vertical70.07Negative VESA 1024×[email protected] MHzHorizontal60.02Positive Vertical75.03Positive VESA 1152×[email protected] MHzHorizontal67.50Positive Vertical75.00Positive VESA 1280×[email protected] MHzHorizontal60.00Positive Vertical60.00Positive VESA 1280×[email protected] MHzHorizontal63.98Positive Vertical60.02Positive VESA 1280×[email protected] MHzHorizontal79.98Positive Vertical75.03Positive VESA 1600×[email protected] MHzHorizontal75.00Positive Vertical60.00Positive VESA 1600×[email protected] MHzHorizontal81.30Positive Vertical65.00Positive VESA 1600×[email protected] MHzHorizontal87.50Positive Vertical70.00Positive VESA 1600×[email protected] MHzHorizontal93.75Positive Vertical75.00Positive VESA CVT 1680×[email protected] MHzHorizontal65.29Negative Vertical59.95Positive VESA CVT 1920×[email protected] MHzHorizontal74.56Negative Vertical59.89Positive VESA CVT RB 1920×[email protected] MHzHorizontal74.04Positive Vertical59.95Negative Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment. • When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Adjustment menu.
40 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according t\ o some of the strictest quality and environmental requirements in the worl\ d. This makes for a high performance product, designed with the user in foc\ us that also minimizes the Impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics ● Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy ● Energy-saving mode after a certain time - beneficial both for the user and environment ● Electrical safety Emissions ● Electromagnetic fields ● Noise emissions Ecology ● The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000 ● Restrictions on ● chlorinated and brominated flame retardants and polymers ● heavy metals such as cadmium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visitwww.tcodevelopment.com Applicable to EV2411W only.
41 For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan EV2411W/S2402W is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
42 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß muß den nachfolgenden Anforderungen entsprechen: a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben. b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist. c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt. d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach hinten ≥ 5°). e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen. f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde. g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt). h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position kippsicher sein. Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1920 × 1200, Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) Übermäßiger Schalldruck von Ohrhörern bzw. Kopfhörern kann einen Hörverlust bewirken. Eine Einstellung des Equalizers auf Maximalwerte erhöht die Ausgangsspannung am Ohrhörer- bzw. Kopfhörerausgang und damit auch den Schalldruckpegel. „Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“ [Begrenzung des maximalen Schalldruckpegels am Ohr] Bildschirmgeräte: Größte Ausgangsspannung 150 mV
43 EV2411W 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 •有毒有害物质或元素的名称及含量 部件名称有毒有害物质或元素 铅 （Pb） 汞 （Hg） 镉 （Cd） 六价铬 （Cr（VI）） 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 印刷电路板×○○○○○ 机箱○○○○○○ 液晶显示器×○○○○○ 其他×○○○○○ ○：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 ×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×”的技术原因进行进一步说明 )
44 S2402W 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 •有毒有害物质或元素的名称及含量 部件名称有毒有害物质或元素 铅 （Pb） 汞 （Hg） 镉 （Cd） 六价铬 （Cr（VI）） 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 印刷电路板×○○○○○ 机箱○○○○○○ 液晶显示器××○○○○ 其他×○○○○○ ○：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 ×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×”的技术原因进行进一步说明 )