Eizo Flexscan S2402w Users Manual

19Chapter 2  Settings and Adjustments

2-8 Turning off the monitor automatically 
[Off Timer]
This	function	allows	you	to	switch	the	setting	to	turn	off	the	monitor	
automatically	after	a	specified	time	has	passed	at	the	power	saving	mode.
	 Adjustable	range:	Disable,	Enable	(0,	1,	2,	3,	5,	10,	15,	20,	25,	30,	45	min,	
1-5h)
(1)	 Choose		from	the	 Adjustment	menu,	and	press	
.
(2)	 Choose		from	the		menu,	and	press	
.
The		setting	menu	appears.
(3)	Select	“Enable”	or	“Disable”	with		or	.
	 When...

20Chapter 2  Settings and Adjustments

2-10 Screen Size Selection
●	To change screen size [Screen Size]
The	image	with	the	resolution	other	than	the	recommended	resolution	is	
displayed	in	full	screen	automatically.	 You	can	change	the	screen	size	by	using	
	from		menu.
MenuFunction
Full Screen (default setting)
Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate.
EnlargedDisplays an image in full screen. In some cases, a...

21Chapter 2  Settings and Adjustments

2-11 Setting Adjustment Menu Display
●	To update menu settings [Menu Size/Menu Position/Menu 
Off Timer/Translucent]
Menu Size
Change	the	 Adjustment	menu	size	using	the	following	procedure.
(1)	 Choose		from	the	 Adjustment	menu,	and	press	
.
(2)	 Choose		from	the		menu,	and	press	
.
(3)	 Choose		from	the		menu,	and	press	
.
The		menu	appears.
(4)	 Select	“Normal”	or	“Enlarged”	with		or	,	and	press	.
The	setting	is	completed.
Menu Position
Adjust	the	menu	position...

22Chapter 2  Settings and Adjustments

2-12 Setting Orientation
●	To set the orientation of the Adjustment menu [Orientation]
This	function	allows	you	to	change	the	orientation	of	the	 Adjustment	menu
when	using	the	monitor	screen	in	vertical	display	position.
(1)	 Choose		from	the	 Adjustment	menu,	and	press	
.
(2)	 Choose		from	the	Others	menu,	and	press	
.
The		menu	appears.
(3)	 Select	“Landscape”	or	“Portrait”	with		or	,	and	press	.
The	setting	is	completed.
(4)	 When	selecting	“Portrait”,	turn	the...

23Chapter 2  Settings and Adjustments

2-15 Enabling/Disabling DDC/CI 
communication [DDC/CI]
This	function	allows	you	to	enable/disable	the	DDC/CI	communication.
(1)	 Press	
	to	turn	off	the	monitor.
(2)	 Press	
	holding		down	to	turn	on	the	monitor.
The	Enable/Disable	setting	is	toggled	by	performing	the	operation	in	step	2.
2-16  Setting Power Indicator ON/OFF  
[Power Indicator]
This	function	allows	you	to	set	the	power	indicator	(blue)	ON/OFF	in	the	
monitor	ON	condition.
(1)	 Choose	
	from	the...

24Chapter 2  Settings and Adjustments

2-19 Resuming the Default Setting [Reset]
There	are	two	types	of	Reset.	One	is	to	reset	the	color	adjustment	only	to	the	
default	settings,	and	the	other	is	to	reset	all	the	settings	to	the	default	settings.
●	To reset color adjustment values
Only	the	adjustment	values	in	the	current	FineContrast	mode	will	revert	to	the	
default	settings	(factory	settings).
(1)	 Choose		from	the	 Adjustment	menu,	and	press	
.
(2)	 Choose		from	the		menu	and	press	
.
The		menu...

25Chapter 3  Connecting Cables

3-1 Connecting Two PCs to the Monitor
Two	PCs	can	be	connected	to	the	monitor	through	the	DVI-D	and	the	D-Sub	
mini	15	pin	connector	on	the	back	of	the	monitor.
Connection examples
DVI-D connectorD-Sub mini15-pin Connector
D-Sub mini 15-pin ConnectorDVI-D connector
Signal cable (Digital) FD-C39Signal cable MD-C87
To PC 2To PC 1
●	To switch the input signal
The	input	signal	switches	each	time		is	pressed.
When	the	signal	is	switched,	the	active	input	port	name	appears	at...

26Chapter 3  Connecting Cables

●	To set input signal selection [Input Signal]
The	monitor	recognizes	the	connector	through	which	PC	signals	are	input.
When	either	PC	is	turned	off	or	enters	the	power-saving	mode,	the	monitor	
automatically	displays	signals	of	another	PC.
Priority settingFunction
AutoWhen either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.
ManualThe monitor detects only the PC’s signals currently displaying automatically....

27Chapter 4  Troubleshooting

Chapter 4 Troubleshooting
If	a	problem	still	remains	after	applying	the	suggested	remedies,	contact	your	local	dealer.
•	 No-picture	problems	→	See	No.1	-	No.2.
•	 Imaging	problems	(digital	input)	→	See	No.3	-	No.8.
•	 Imaging	problems	(analog	input)	→	See	No.3	-	No.12.
•	 Other	problems	→	See	No.13	-	No.17.
ProblemsPossible cause and remedy
1.  No picture
•  Power indicator does not light. • 
Check whether the power cord is connected correctly. If 
the problem persists,...

28Chapter 4  Troubleshooting
ProblemsPossible cause and remedy
6.  Green/red/blue/white dots or defective dots remain 
on the screen. • 
This is due to LCD panel characteristics and is not a failure.
7.  Interference patterns or pressure marks remain on 
the screen. • 
Leave the monitor with a white or black screen. The symptom may disappear.
8.  Noise appears on the screen. • When entering the singnals of analog input, change 
the setting to “On” in  from the  
menu.
•  When entering the signals of...