Eizo Flexscan S2401w Users Manual

19Chapter 2  Settings and Adjustments

● To set monitor power-saving [VESA DPMS/DVI DMPM]
■  Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PCMonitorPower 
Indicator
OperatingOperatingBlue
Power saving STAND-BY SUSPENDED OFF
Power savingOrange
[Procedure]
(1)  Choose  from the Adjustment menu, and press 
.
The  menu appears.
(2)  Select “VESA DPMS” with  or , and press .
The power saving setting is completed.
[Resumption Procedure]
•  Operate the mouse or keyboard...

20Chapter 2  Settings and Adjustments

2-5  Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
MenuFunction
Full Screen (default setting)
Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate.
EnlargedDisplays an image in full screen. In some cases, a...

21Chapter 2  Settings and Adjustments

2-6  Power Indicator/EIZO Logo Display 
Setting
● To turn off the Power indicator while a screen is displayed 
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is 
displayed.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  menu appears.
(3)  Select “Disable” with  or , and press .
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing...

22Chapter 2  Settings and Adjustments

NOTE
•  The display time of the FineContrast 
mode remains unchanged.
2-8  Disabling DDC/CI Communication
● To disable DDC/CI communication
[Procedure]
(1)  Press 
 to turn off the unit.
(2)  Press 
 again while pressing .
DDC/CI communication setting is disabled.
[Resetting]
(1)  Press 
 to turn off the unit.
(2)  Press 
 again while pressing .
DDC/CI communication setting is enabled.
[Checking the setting status]
(1)  Select  menu in the Adjustment menu and press...

23Chapter 2  Settings and Adjustments

Translucent
Set the transparency for menu display using the following procedure.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4)  Adjust the transparency for menu display with  or , and press .
The transparency setting is completed.
2-10  Setting Orientation
● To set the orientation of the Adjustment menu [Orientation]
The orientation of the Adjustment...

24Chapter 2  Settings and Adjustments

NOTE
•  For main default settings, refer 
to “Main default settings (factory 
settings)” on page 33.
2-12  Setting BrightRegulator
● To set automatic brightness adjustment [BrightRegulator]
The sensor on the front side of the monitor detects the environmental brightness 
to adjust the screen brightness automatically and comfortably.
(1) Choose  from the Adjustment menu, and press 
.
(2) Choose < BrightRegulator> from the  menu, and press .
The BrightRegulator...

25Chapter 3  Connecting Cables

3-1  Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub 
mini 15 pin connector on the back of the monitor.
Connection examples
DVI-IconnectorD-Sub mini15-pin connector
PC 1PC 2Example 1DigitalDVISignal cable  (supplied with FD-C39)Signal cable (supplied MD-C87)D-sub mini 15-pinAnalog
Example 2AnalogD-sub mini 15-pinSignal cable  (FD-C16 option)Signal cable (supplied MD-C87)D-sub mini 15-pinAnalog
Selecting input...

26Chapter 3  Connecting Cables

● To set input signal selection [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor 
automatically displays signals of another PC.
Priority settingFunction
AutoWhen either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.
ManualThe monitor does not detect the PC’s 
signals automatically. Select an active...

27Chapter 4  Troubleshooting

Chapter 4  Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
•  No-picture problems → See No.1 - No.2.
•  Imaging problems (digital input) → See No.3 - No.8.
•  Imaging problems (analog input) → See No.3 - No.12.
•  Other problems → See No.13 - No.17.
•  USB problems → See No.18.
ProblemsPossible cause and remedy
1. No picture
•  Power indicator does not light. •  Check whether the power cord is connected correctly....

28Chapter 4  Troubleshooting

ProblemsPossible cause and remedy
9.   Display position is incorrect.
•  Adjust image position so that it is displayed properly  within the display area using the “Hor.Position” and “Ver.
Position” adjustment.
•  If the problem persists, use the graphics board’s utility if 
available to change the display position.
10.  Vertical bars appear on the screen or a part of the  image is flickering.
•  Adjust using . (see page 13)
11.  Whole screen is flickering or blurring.
•...