Eizo Flexscan S2231w Users Manual
Here you can view all the pages of manual Eizo Flexscan S2231w Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 31
29Chapter 4 Troubleshooting ProblemsPossible cause and remedy 18. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. • Check whether the USB cable is connected correctly. • Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer. (Refer to the manual of the PC for details.) • Please perform the followings to check the status. • Reboot the PC. •...
Page 32
30Chapter 5 Reference Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2 Remove the stand. (Prepare a screwdriver.) Unscrew the four screws securing the unit and the stand with the screwdriver. 3 Attach the monitor to the arm or stand.Secure the...
Page 33
31Chapter 5 Reference Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the LCD panel surface. 5-2 Cleaning Clean the monitor periodically to keep the monitor clean and extend its life. Cabinet Clean the cabinet with a soft cloth dampened with little mild deter gent. LCD Panel • Clean the LCD panel with a soft cloth such as cotton...
Page 34
32Chapter 5 Reference 5-3 Specifications LCD Panel22.0-inch (560 mm) TFT color LCD with anti-glare hard coating Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more) Dot Pitch0.282mm Horizontal Scan FrequencyAnalog: 24-82kHzDigital: 31-65kHz Vertical Scan Frequency Analog: 49-86Hz (Non-interlace) (1280 × 1024: 49-76Hz)(1680 × 1050: 49-61Hz)Digital: 59-61Hz (Non-interlace) (VGA TEXT: 69-71Hz) Resolution1680 dots × 1050 lines Max. Dot ClockAnalog: 150MHzDigital: 120MHz Max. Display Color...
Page 35
33Chapter 5 Reference Movable rangeTilt Height adjustable stand : 40° Up, 0° Down EZ-UP stand : 25° Up, 0° Down SwivelHeight adjustable stand : 35° Right, 35° Left EZ-UP stand : 172° Right, 172° Left AdjustableheightHeight adjustable stand : 82 mm (3.2 inch) EZ-UP stand : 165 mm (6.5 inch) RotationHeight adjustable stand : 90° EZ-UP stand : 90° Environmental ConditionsTemperatureOperating temperature: 0 °C - 35 °C (32 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)...
Page 36
34Chapter 5 Reference Outside Dimensions (Height adjustable stand) 333(13.1) 298.1(11.7) 475.8(18.7)507(20.0) 35°35° 203.5(8.0)100(3.9)203.5(8.0) 222.5(8.8) 100(3.9) 116.5(4.6) 43.974(2.91) 106(4.2) TILT40° 253.5(10.0) 190(7.5) 230(9.1)398.5(15.7) 439~521(17.3~20.5) 19~101 (0.75~4.0) (1.73) SWIVEL unit : mm (inch) Outside Dimensions (EZ-UP stand) 475.8(18.7)507(20.0) 298.1(11.7) 333(13.1) 43.9(1.73)74TILT25° 96.5(3.8) (2.91) PIVOT SWIVEL Ø272(10.7) 90° 13.4(0.53) 172°172° 100 100 279.9(11.0)...
Page 37
35Chapter 5 Reference Connector Pin Assignment • DVI-I connector 123456789101112131415161920211718222324 C1C2C3C4C5 Pin No.SignalPin No.SignalPin No.Signal 1T.M.D.S. Data 2- 11T.M.D.S. Data1/3 Shield21NC* 2T.M.D.S. Data 2+12NC*22 T.M.D.S. Clock shield 3T.M.D.S. Data2/4 Shield13NC*23 T.M.D.S. Clock+ 4NC*14+5V Power24T.M.D.S. Clock- 5NC*15Ground (return for +5V, Hsync and Vsync)C1Analog Red 6DDC Clock (SCL)16Hot Plug DetectC2Analog Green 7DDC Data (SDA)17T.M.D.S. Data0-C3Analog Blue 8Analog Vertical...
Page 38
36Chapter 5 Reference 5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly , some vertical bars appear on the screen. DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the setting information,...
Page 39
37Chapter 5 Reference sRGB (Standard RGB) International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers, digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for the Internet use. Temperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen becomes reddish at a low temperature, and bluish at a high temperature, like the fl...
Page 40
38Chapter 5 Reference 5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). ModeDot clock Frequency PolarityHorizontal: kHz Vertical: Hz VGA 640×480@60Hz 25.2 MHzHorizontal31.47Negative Vertical 59.94Negative VGA 720×400@70Hz 28.3 MHzHorizontal31.47Negative Vertical 70.09Positive Macintosh 640×[email protected] MHzHorizontal35.00Negative Vertical 66.67Negative Macintosh 832×[email protected] MHzHorizontal49.72Negative Vertical 74.55Negative Macintosh...