Eizo Flexscan S2100 Users Manual

19Chapter 2  Settings and Adjustments
2-8  Setting Adjustment menu Display
● To update menu settings [Menu Size/Menu Position/
Menu Off Timer/Translucent/Orientation]
Menu Size
Change the Adjustment menu size using the following procedure.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
The  menu appears.
(4)  Select “Enlarged” using  or , and press .
The menu size setting is completed.
Menu Position
Adjust the menu...

20Chapter 2  Settings and Adjustments
NOTE
•  The usage time is not always “0” when you purchase the monitor due 
to factory inspection.
NOTE
•  For default settings, refer to “Main default settings (factory settings)” on 
page 28.
2-9  Viewing Information/Setting Language
● To check settings, usage time, etc.
[Information]
This function allows you to check settings, model name, serial number, and 
usage time of the monitor.
(1)  Choose  from the Adjustment menu, and press 
.
The  menu appears.
(2)...

21Chapter 2  Settings and Adjustments
3-1  Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub 
mini 15 pin connector on the back of the monitor.
Connection examples
DIV-I connector (SIGNAL1) D-sub mini 
15-pin Connector 
(SIGNAL2)
PC 1 PC 2Example 1
DigitalDVI Signal cable 
(supplied with 
FD-C39)Signal cable 
(supplied 
MD-C87)D-sub mini 15-pinAnalog
Example 2Analog
D-sub mini 
15-pin
Signal cable 
(FD-C16 option)Signal cable 
(supplied...

22Chapter 3  Connecting Cables
● To set auto-switching of input signals [Input Signal]
The monitor recognizes the connector through which PC signals are input.\
When either PC is turned off or enters the power-saving mode, the monitor 
automatically displays signals of another PC.
Priority setting Function
Auto When either PC is turned off or enters  the power-saving mode, the monitor 
automatically displays signals of 
another PC.
Manual The monitor does not detect the PC’s  signals automatically....

23Chapter 4  Troubleshooting
Chapter 4  Troubleshooting
If a problem still remains after applying the suggested remedies, contac\
t your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems  → See No.3 - No.11.
• Other problems  → See No.12 - No.18.
Problems Possible cause and remedy
1.  
No picture
•  Power indicator does not light. •  Check whether the power cord is connected correctly. If 
the problem persists, turn off the monitor, and then turn it 
on again a few minutes...

24Chapter 4  Troubleshooting
Problems Possible cause and remedy
8.  The screen is too bright or too dark. •  Adjust . (The LCD monitor backlight has a 
fi xed life span. When the screen becomes dark or begins 
to  fl icker, contact your local dealer.)
9. Afterimages appear. •  Use a screen saver or off timer function for a long-time 
image display.
•  Afterimages are particular to LCD monitors. Avoid  displaying the same image for a long time.
10.  Green/red/blue/white dots or defective dots remain  on...

25Chapter 5  Reference
5-1  Attaching an Arm (Option)
The stand can be removed and replaced with an arm (or another stand) t\
o be 
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1  Hold the upper and lower centers of the stand joint cover, and slide sideways to remove it.
2  Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
3  Remove the stand. (Prepare a screwdriver.)Unscrew the two screws (M4 × 10mm) securing the unit and...

26Chapter 5  Reference
5-2 Cleaning
Clean the monitor periodically to keep the monitor clean and extend its \
life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
•  Clean the LCD panel with a soft cloth such as cotton cloth or lens clean\
ing paper. 
•  Remove persistent stains gently with a cloth dampened with little water, and  then clean the LCD panel again with a dry cloth for better  fi nishing.
Attention
•  Never use any solvents or chemicals, 
such as...

27Chapter 5  Reference
5-3 Specifi cations
LCD Panel 21.3-inch (540 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178°, Horizontal 178° (CR: 10 or more)
Dot Pitch 0.270 mm 
Horizontal Scan Frequency Analog: 24 - 80 kHz (Automatic) Digital: 31 - 76 kHz
Vertical Scan Frequency Analog: 49 - 76 Hz (Automatic) (1600 × 1200: 49 - 61 Hz)
Digital: 59 - 61 Hz
(VGA TEXT: 69 - 71 Hz)
Resolution 1600 dots × 1200 lines
Max. Dot Clock Analog: 162 MHz Digital: 162 MHz
Max. Display Colors 16.77...

28Chapter 5  Reference
Main default settings (factory settings)
BrightRegulator Enable
Smoothing 3
FineContrast Mode  Custom
Screen Size Full
Input Signal Auto
Off Timer Disabled
Setting Size NormalOff Timer 45 seconds
Language English
Outside Dimensions
unit : mm (inch)
Connector Pin Assignment
• DVI-I connector 
 1 23
4
56
78
910 11 12
1314 15
16
19 20 21
17 18 22 23 24C1C2C3C4
C5
Pin No.SignalPin No.SignalPin No.Signal 
1 TMDS Data 2- 11 TMDS Data1/3 Shield 21 NC*
2 TMDS Data 2+ 12 NC* 22 TMDS Clock...