Eizo Flexscan S2001w Users Manual

29Chapter 4  Troubleshooting

ProblemsPossible cause and remedy
18.  The monitor connected with the USB cable is 
detected. / USB devices connected to the monitor 
does not work. •  Check whether the USB cable is connected correctly.
•  Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB 
port, contact your local dealer. (Refer to the manual of 
the PC for details.)
•  Please perform the followings to check the status.
 
•  Reboot the PC.
 
•  Connect...

30Chapter 5  Reference

Chapter 5  Reference
5-1  Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be 
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1  Lay the LCD monitor on a soft cloth spread over on a stable 
surface with the panel surface facing down.
2  Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the 
screwdriver.
3  Attach the monitor to the arm or stand.Secure the...

31Chapter 5  Reference

Attention
•  Never use any solvents or chemicals, such as thinner, benzene, wax, 
alcohol, and abrasive cleaner, which 
may damage the cabinet or LCD 
panel.
NOTE
•  Optional ScreenCleaner is 
recommended for cleaning the LCD 
panel surface.
5-2  Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild deter gent.
LCD Panel
•  Clean the LCD panel with a soft cloth such as cotton...

32Chapter 5  Reference

5-3  Specifications
S2001W
LCD Panel20.1-inch (510 mm) TFT color LCD with anti-glare hard coating
Viewing angle*
: Horizontal 170°, Vertical 170°  (CR:10 or more)
Dot Pitch0.258mm
Horizontal Scan FrequencyAnalog: 24-82kHzDigital: 31-65kHz
Vertical Scan Frequency
Analog: 49-86Hz (Non-interlace) (1280 × 1024: 49-76Hz)(1680 × 1050: 49-61Hz)Digital: 59-61Hz (Non-interlace)
(VGA TEXT: 69-71Hz)
Resolution1680 dots × 1050 lines
Max. Dot ClockAnalog: 150MHzDigital: 120MHz
Max. Display...

33Chapter 5  Reference

Movable rangeTilt Height adjustable stand  : 40° Up, 0° Down
EZ-UP stand  : 25° Up, 0° Down
SwivelHeight adjustable stand  : 35° Right, 35° Left
EZ-UP stand  : 172° Right, 172° Left
AdjustableheightHeight adjustable stand  : 82 mm
EZ-UP stand 
: 165 mm
RotationHeight adjustable stand  : 90°
EZ-UP stand  : 90°
Environmental ConditionsTemperatureOperating temperature: 0 °C - 35 °CStorage temperature: -20 °C - 60 °C
HumidityRelative humidity: 30% - 80% (no condensation)
USBStandard...

34Chapter 5  Reference

Plug & PlayVESA DDC 2B / EDID structure 1.3
Dimensions (Width) × (Height) × (Depth) mm (inch)
Main unit (including Height adjustable stand)
507mm(20.0) × 439 - 521mm(17.3 - 20.5) × 230mm(9.1)
Main unit (including 
EZ-UP stand)507mm(20.0) × 351.5 - 516.5mm(13.8 - 20.3) × 279.9 - 296.4mm(11.0 - 
11.7)
Main unit (without stand)507mm(20.0) × 333mm(13.1) × 74mm(2.9)
Mass Main unit (including Height adjustable stand)
10.2 kg (22.5 lbs.)
Main unit (including 
EZ-UP stand)11.5 kg (25.4...

35Chapter 5  Reference

Outside Dimensions 
S2001W (Height adjustable stand)
69.5(2.74)
435.4(17.1)
272.9(10.7)
309(12.2)
469(18.5)
427~509(16.8~20.0)
43.8(1.72)
208.5(8.2)
100(3.9)
100(3.9)
40°
168(6.6)
35°35°
38~120
(1.5~4.7)222.5(8.8)
104.5(4.1)
184.5(7.3)184.5(7.3)
241.5(9.5)
118(4.6)
unit : mm (inch)
S2001W (EZ-UP stand)
435.4(17.1)469(18.5)
272.9(10.7)
309(12.2)
43.8(1.72)69.5(2.74)TILT25°
PIVOT
SWIVEL
φ272(10.7)
90°
13.4(0.53)
172°172°
100
100
279.9(11.0)
129.3(5.1)
115.5339.5(13.4)
185(7.3)...

36Chapter 5  Reference

S2201W (Height adjustable stand)
333(13.1)
298.1(11.7)
475.8(18.7)507(20.0)
439~521(17.320.5)
35°35°
203.5(8.0)100(3.9)203.5(8.0)
222.5(8.8)
100(3.9)
116.5(4.6)
43.9(1.7)74(2.9)
106(4.2)
40°253.5(10.0)
19~101
(0.75~3.98)
190(7.5)
230(9.1)398.5(15.7)
unit : mm (inch)
S2201W (EZ-UP stand)
475.8(18.7)507(20.0)
298.1(11.7)
333(13.1)
43.9(1.73)74TILT25°
96.5(3.8)
(2.91)
PIVOT
SWIVEL
φ272(10.7)
90°
13.4(0.53)
172°172°
100
100
279.9(11.0)
129.3(5.1)
185(7.3)
351.5(13.8)...

37Chapter 5  Reference

Connector Pin Assignment
•  DVI-I connector 
 123456789101112131415161920211718222324
C1C2C3C4C5
Pin No.SignalPin No.SignalPin No.Signal 
1T.M.D.S. Data 2- 11T.M.D.S. Data1/3 Shield21NC*
2T.M.D.S. Data 2+12NC*22 T.M.D.S. Clock shield
3T.M.D.S. Data2/4 Shield13NC*23 T.M.D.S. Clock+
4NC*14+5V Power24T.M.D.S. Clock-
5NC*15Ground (return for +5V, Hsync and Vsync)C1Analog Red
6DDC Clock (SCL)16Hot Plug DetectC2Analog Green
7DDC Data (SDA)17T.M.D.S. Data0-C3Analog Blue
8Analog Vertical...

38Chapter 5  Reference

5-4  Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in 
use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly , some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface)
VESA provides the standardization for the interactive communication of the setting information,...