Eizo Flexscan S1501 Users Manual
Have a look at the manual Eizo Flexscan S1501 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Eizo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 25
23Chapter 5 Reference
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) t\
o be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.Secure the monitor...](http://img.usermanuals.tech/thumb/1704/51639/w64_eizo_flexscan_s1501-user-s-manual-24.png "Page 25
23Chapter 5 Reference
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) t\
o be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.Secure the monitor...")
![Page 26
24Chapter 5 Reference
5-2 Power Saving Mode
Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC Monitor Power
Indicator
Operating Operating Blue
Power
saving STAND-BY
SUSPENDED
OFF Power saving Orange
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in fi ve seconds in connection with
the PC setting....](http://img.usermanuals.tech/thumb/1704/51639/w64_eizo_flexscan_s1501-user-s-manual-25.png "Page 26
24Chapter 5 Reference
5-2 Power Saving Mode
Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC Monitor Power
Indicator
Operating Operating Blue
Power
saving STAND-BY
SUSPENDED
OFF Power saving Orange
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in fi ve seconds in connection with
the PC setting....")
![Page 30
28Chapter 5 Reference
5-5 Glossary
ClockThe analog input monitor needs to reproduce a clock of the same frequenc\
y as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for i\
mage display.
This is called clock adjustment. If the clock pulse is not set correctly\
, some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the s\
etting...](http://img.usermanuals.tech/thumb/1704/51639/w64_eizo_flexscan_s1501-user-s-manual-29.png "Page 30
28Chapter 5 Reference
5-5 Glossary
ClockThe analog input monitor needs to reproduce a clock of the same frequenc\
y as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for i\
mage display.
This is called clock adjustment. If the clock pulse is not set correctly\
, some vertical bars appear on the screen.
DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the s\
etting...")
![Page 31
29Chapter 5 Reference
5-6 Preset Timing
The following table shows factory preset video timing (for analog signa\
l only).
Mode Dot clockFrequency
PolarityHorizontal: kHz
Vertical: Hz
VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative
Vertical 59.94 Negative
VGA 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative
Vertical 70.09 Positive
PC-9801 640×400@56Hz 21.1 MHz Horizontal 24.83 Negative
Vertical 56.42 Negative
PC-9821 640×400@70Hz 25.2 MHz Horizontal 31.48 Negative
Vertical 70.10 Negative
Macintosh...](http://img.usermanuals.tech/thumb/1704/51639/w64_eizo_flexscan_s1501-user-s-manual-30.png "Page 31
29Chapter 5 Reference
5-6 Preset Timing
The following table shows factory preset video timing (for analog signa\
l only).
Mode Dot clockFrequency
PolarityHorizontal: kHz
Vertical: Hz
VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative
Vertical 59.94 Negative
VGA 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative
Vertical 70.09 Positive
PC-9801 640×400@56Hz 21.1 MHz Horizontal 24.83 Negative
Vertical 56.42 Negative
PC-9821 640×400@70Hz 25.2 MHz Horizontal 31.48 Negative
Vertical 70.10 Negative
Macintosh...")
![Page 32
30Chapter 5 Reference
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according t\
o
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in foc\
us
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and...](http://img.usermanuals.tech/thumb/1704/51639/w64_eizo_flexscan_s1501-user-s-manual-31.png "Page 32
30Chapter 5 Reference
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according t\
o
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in foc\
us
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and...")
29Chapter 5 Reference 5-6 Preset Timing The following table shows factory preset video timing (for analog signa\ l only). Mode Dot clockFrequency PolarityHorizontal: kHz Vertical: Hz VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative Vertical 59.94 Negative VGA 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative Vertical 70.09 Positive PC-9801 640×400@56Hz 21.1 MHz Horizontal 24.83 Negative Vertical 56.42 Negative PC-9821 640×400@70Hz 25.2 MHz Horizontal 31.48 Negative Vertical 70.10 Negative Macintosh 640×480@67Hz 30.2 MHzHorizontal 35.00 Negative Vertical 66.67 Negative Macintosh 832×624@75Hz 57.3 MHzHorizontal 49.72 Negative Vertical 74.55 Negative VESA 640×480@72Hz 31.5 MHz Horizontal 37.86 Negative Vertical 72.81 Negative VESA 640×480@75Hz 31.5 MHz Horizontal 37.50 Negative Vertical 75.00 Negative VESA 800×600@56Hz 36.0 MHz Horizontal 35.16 Positive Vertical 56.25 Positive VESA 800×600@60Hz 40.0 MHz Horizontal 37.88 Positive Vertical 60.32 Positive VESA 800×600@72Hz 50.0 MHz Horizontal 48.08 Positive Vertical 72.19 Positive VESA 800×600@75Hz 49.5 MHz Horizontal 46.88 Positive Vertical 75.00 Positive VESA 1024×768@60Hz 65.0 MHz Horizontal 48.36 Negative Vertical 60.00 Negative VESA 1024×768@70Hz 75.0 MHz Horizontal 56.48 Negative Vertical 70.07 Negative VESA 1024×768@75Hz 78.8 MHz Horizontal 60.02 Positive Vertical 75.03 Positive Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment. • When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Adjustment menu. S1501_U M _E N .in dd 2 9S1501_UM_EN.indd 295/2 8/2 007 5 :1 2:4 7 P M5/28/2007 5:12:47 PM
30Chapter 5 Reference Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according t\ o some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in foc\ us that also minimizes the Impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics ● Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy ● Energy-saving mode after a certain time - beneficial both for the user and environment ● Electrical safety Emissions ● Electromagnetic fields ● Noise emissions Ecology ● The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000 ● Restrictions on ● chlorinated and brominated flame retardants and polymers ● heavy metals such as cadmium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visitwww.tcodevelopment.com
31 For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan S1501 is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
32 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß muß den nachfolgenden Anforderungen entsprechen: a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben. b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist. c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt. d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach hinten ≥ 5°). e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen. f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde. g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt). h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position kippsicher sein. Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1024 × 768 Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) Übermäßiger Schalldruck von Ohrhörern bzw. Kopfhörern kann einen Hörverlust bewirken. Eine Einstellung des Equalizers auf Maximalwerte erhöht die Ausgangsspannung am Ohrhörer- bzw. Kopfhörerausgang und damit auch den Schalldruckpegel. „Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“ [Begrenzung des maximalen Schalldruckpegels am Ohr] Bildschirmgeräten: Größte Ausgangsspannung 150 mV