Eizo Flexscan Ev2411w Users Manual

							
29Chapter 5  Reference

Chapter 5 Reference
5-1 Attaching an Arm
The	stand	can	be	removed	and	replaced	with	an	arm	(or	another	stand)	to	be	
attached	to	the	monitor.	Use	an	arm	or	stand	of	EIZO	option.
1 Lay the LCD monitor on a soft cloth spread over on a stable 
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew	the	four	screws	securing	the	unit	and	the	stand	with	the	
screwdriver.
3 Attach the monitor to the arm or stand.
Secure	the	monitor	to	the	arm	or	stand	using	the	screws	specified	in	the	
user’s	manual	of	the	arm	or	stand.
Attention
•	 When	attaching	an	arm	or	stand,	
follow	the	instructions	of	their	user’s	
manual.
•	 When 	using 	another 	manufacturer’s 	
arm 	or 	stand, 	confirm 	the 	following 	in 	
advance 	and 	select 	one 	conforming 	to 	
the 	VESA 	standard.
–	Clearance	between	the	screw	holes:	 100	mm	×	100	mm
–	Thickness	of	plate:	2.6	mm
–	Strong	enough	to	support	weight	of	 the	monitor	unit	(except	the	stand)	
and	attachments	such	as	cables.
	 Use	the	screws	as	described	below. –	EZ-UP 	stand
	
Free	mount	type:
	
The	screws	supplied	with	this	
monitor	(M4	×	12mm)
–	Height	adjustable	stand
	
FlexStand:	
The	screws	fixing	the	stand	to	the	
monitor
•	 When	using	an	arm	or	stand,	attach	it	 to	meet 	the 	following 	tilt 	angles 	of 	the	
monitor.
–	Up	45	degrees,	down	45	degrees	
(horizontal	display,	and	vertical	
display	rotated	90	degrees	
clockwise)
•	 Connect	the	cables	after	attaching	an	
arm.
 
						

							
30Chapter 5  Reference

5-2 Folding the EZ-UP stand
Perform	the	following	procedures	to	fold	the	stand	when	re-packing	a	monitor	
with	an	EZ-UP 	stand.
1 Remove the cable holder.
2 Lower the monitor screen position until the hinge of the stand 
touches	the	stand	base,	and	attach	the	lock	metal	fitting.
Adjust	the	monitor	angle	so	as	the	monitor	screen	not	to	touch	the	stand	
base.
HingeStand Base
Lock metal fitting
3 Fall the monitor screen backward with keeping slide-up the 
“Unlock” knob.
When	maximally	tilting	(25º)	the	monitor	screen	backward,	the	“Unlock”	
knob	may	be	hard	to	be	slid-up.	 Then,	slightly	tilt	up	the	monitor	to	
vertical	direction	and	slide-up	the	“Unlock”	knob.
“Unlock” knob
 
						

							
31Chapter 5  Reference
5-3	 Specifications
EV2411W
LCD Panel24.1-inch (610 mm) TFT color LCD with anti-glare
Viewing angle:  Horizontal 170°, Vertical 160° (CR:10 or more)
Dot Pitch0.270mm
Horizontal Scan FrequencyAnalog: 31-94kHzDigital: 31-76kHz
Vertical Scan FrequencyAnalog: 55-76Hz (Non-interlace)(1920 × 1200: 55-61Hz)Digital: 59-61Hz (Non-interlace)(VGA TEXT: 69-71Hz)
Resolution1920 dots × 1200 lines
Max. Dot ClockAnalog: 202.5MHzDigital: 162MHz
Max. Display ColorApprox. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit LUT)
Display Area (H × V)518.4mm × 324.0mm
Power Supply100-120 VAC ±10%, 50/60Hz 0.75A200-240 VAC ±10%, 50/60Hz 0.45A
Power ConsumptionScreen Display On45W or less (Speaker working)43W or less (Speaker not working)
Power saving mode0.8W or less (for single signal input, when stereo mini jack cable is n\
ot connected)
Power button Off0.6W or less (when stereo mini jack cable is not connected)
Main Power switch Off0W
Input Signal ConnectorDVI-D connector (Applicable to HDCP), D-Sub mini 15-pin
Analog Input Signal (Sync)Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission SystemTMDS (Single Link)
Video Signal MemoryAnalog signal: 45 (preset: 22)Digital signal: 10
Audio OutputSpeaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)Headphone output: 2mW + 2mW
Line inputInput impedance : 48 kΩ (typ.)Input level :1.0 Vrms (Max.)
Plug & PlayVESA DDC 2B / EDID structure 1.3
Dimensions (Width) × (Height) × (Depth)
Main unit (including Height adjustable stand)566 mm (22.3 inch) × 456 - 538 mm (18.0 - 21.2 inch) × 208.5 m\
m  (8.2 inch)
Main unit (including EZ-UP stand)566 mm (22.3 inch) × 380.4 - 533.5 mm (15.0 - 21.0 inch) × 279\
.9 mm - 307.6 mm (11.0 - 12.1 inch)
Main unit (without stand)566 mm (22.3 inch) × 367 mm (14.4 inch) × 85 mm (3.35 inch)
MassMain unit (including Height adjustable stand)Approx. 10.2 kg (22.5 lbs.)
Main unit (including EZ-UP stand)Approx. 12.0 kg (26.5 Ibs.)
Main unit (without stand)Approx. 7.2 kg (15.9 lbs.)
 
						

							
32Chapter 5  Reference

Movable rangeHeight adjustable standTilt: 40° Up, 0° DownSwivel: 35° Right, 35° LeftAdjustable height: 82 mm (3.2 inch)Rotation: 90° (clockwise)
EZ-UP standTilt: 25° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 153.1 mm (6.0 inch)Rotation: 90° (clockwise)
Environmental ConditionsTemperatureOperating temperature: 5 °C - 35 °C (41 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
HumidityOperating humidity: 30% - 80% R.H. (no condensation)Storage humidity: 30% - 80% R.H. (no condensation)
PressureOperating: 700 to 1,060 hPaStorage: 200 to 1,060 hPa
S2402W
LCD Panel24.1-inch (610 mm) TFT color LCD with anti-glare
Viewing angle:  Horizontal 170°, Vertical 160° (CR:10 or more)
Dot Pitch0.270mm
Horizontal Scan FrequencyAnalog: 31-94kHzDigital: 31-76kHz
Vertical Scan FrequencyAnalog: 55-76Hz (Non-interlace)(1920 × 1200: 55-61Hz)Digital: 59-61Hz (Non-interlace)(VGA TEXT: 69-71Hz)
Resolution1920 dots × 1200 lines
Max. Dot ClockAnalog: 202.5MHzDigital: 162MHz
Max. Display ColorApprox. 16.77 million colors: Applicable to 8 bit (1064.33 million colors/10bit LUT)
Display Area (H × V)518.4mm × 324.0mm
Power Supply100-120 VAC ±10%, 50/60Hz 0.9A200-240 VAC ±10%, 50/60Hz 0.55A
Power ConsumptionScreen Display On58W or less (Speaker working)54W or less (Speaker not working)
Power saving mode0.7W or less (for single signal input, when stereo mini jack cable is n\
ot connected)
Power button Off0.5W or less (when stereo mini jack cable is not connected)
Main Power switch Off0W
Input Signal ConnectorDVI-D connector (Applicable to HDCP), D-Sub mini 15-pin
Analog Input Signal (Sync)Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission SystemTMDS (Single Link)
Video Signal MemoryAnalog signal: 45 (preset: 22)Digital signal: 10
Audio OutputSpeaker output: 0.5W + 0.5W (8Ω, THD: 3% or less)Headphone output: 2mW + 2mW
Line inputInput impedance : 48 kΩ (typ.)Input level :1.0 Vrms (Max.)
Plug & PlayVESA DDC 2B / EDID structure 1.3
 
						

							
33Chapter 5  Reference

Dimensions (Width) × (Height) × (Depth)
Main unit (including Height adjustable stand)566 mm (22.3 inch) × 456 - 538 mm (18.0 - 21.2 inch) × 208.5 m\
m  (8.2 inch)
Main unit (including EZ-UP stand)566 mm (22.3 inch) × 380.4 - 533.5 mm (15.0 - 21.0 inch) × 279\
.9 mm - 307.6 mm (11.0 - 12.1 inch)
Main unit (including FlexStand)566 mm (22.3 inch) × 381.5 - 538.5 mm (15.0 - 21.2 inch) × 242\
 - 256 mm (9.5 - 10.1 inch)
Main unit (without stand)566 mm (22.3 inch) × 367 mm (14.4 inch) × 85 mm (3.35 inch)
MassMain unit (including Height adjustable stand)Approx. 10.2 kg (22.5 lbs.)
Main unit (including EZ-UP stand)Approx. 12 kg (26.5 Ibs.)
Main unit (including FlexStand)Approx. 10.2 kg (22.5 Ibs.)
Main unit (without stand)Approx. 7.2 kg (15.9 lbs.)
Movable rangeHeight adjustable standTilt: 40° Up, 0° DownSwivel: 35° Right, 35° LeftAdjustable height: 82 mm (3.2 inch)Rotation: 90° (clockwise)
EZ-UP standTilt: 25° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 153.1 mm (6.0 inch)Rotation: 90° (clockwise)
FlexStandTilt: 30° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 225 mm (8.9 inch) (157 mm (6.2 inch) when Tilt is 0°)Rotation: 90° (clockwise)
Environmental ConditionsTemperatureOperating temperature: 5 °C - 35 °C (41 °F - 95 °F)Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
HumidityOperating humidity: 30% - 80% R.H. (no condensation)Storage humidity: 30% - 80% R.H. (no condensation)
PressureOperating: 700 to 1,060 hPaStorage: 200 to 1,060 hPa
 
						

							
34Chapter 5  Reference

Main default settings (factory settings)
Auto EcoViewOff (EV2411W)On (S2402W)
Smoothing3
FineContrast Mode Custom
PowerManagerOn
Input SignalAuto
Screen SizeFull Screen
Off TimerDisable
Menu SettingsMenu SizeNormal
Menu Off Timer45 sec
Language English
Outside Dimensions (Height adjustable stand)
566(22.3)520.4(20.5)
326(12.8)367(14.4)
168(6.6)
35°
208.5(8.2)
40°
287.5(11.3)
22.8(0.9)22.8(0.9)
20.5(0.81)
20.5(0.81)
56.385
100(3.9)
133.5(5.3)182.4(7.2)8(0.31)
14.6(0.57)
577.1(22.7)504(19.8)
35°
532(20.9)
100(3.9)233(9.2)233(9.2)
133.5(5.3)
89(3.5)
272.5(10.7)
82(3.23)
90°
20(0.79)
325(12.8)240.5(9.5)
(2.22)(3.35)
PIVOT
SWIVEL
456(18)
unit : mm (inch)
 
						

							
35Chapter 5  Reference

unit : mm (inch)
Outside Dimensions (EZ-UP stand)
Ø272(10.7)
90°
13.4(0.53)
326(12.8)367(14.4)
172°172°
520.4(20.5)566(22.3)
129.3(5.1)
67(2.64)
279.9(11)
25°
166.5(6.6)
350(13.8)
533.5(21)
64.3(2.53)
153.1(6)
380.5(15)
196.9(7.8)
27.7(1.09)307.6(12.1)
100(3.9)233(9.2)233(9.2)
133.5(5.3)
100(3.9)
133.5(5.3)
532(20.9)
56.3(2.22)
85(3.35)
22.8(0.9)22.8(0.9)
20.5(0.81)
20.5(0.81)
633(24.9)
13.4(0.53)
552(21.7)
SWIVEL
PIVOT
Adjustable height
Outside Dimensions (FlexStand)
638(25.1)
566(22.3)22.8(0.9)520.4(20.5)22.8(0.9)
20.5(0.81)
326(12.8)
20.5(0.81)
538.5(21.2)
90
72(2.83)
220(8.7)
532 (20.9)
85(3.35)56.3 (2.22)
95(3.74)
172172
30
171.5(6.8)14.5(0.57)
36(1.42)235.5(9.3)256(10.1)
411.1(16.2)355(14)
9.5(0.37)
8.5(0.33)242(9.5)
332.5(13.1)
198(7.8)
381.5
100(3.9)
100(3.9)
133.(5.3)
133.5(5.3)
233(9.2)233(9.2)
PIVOT
TILT
SWIVELSWIVEL
unit : mm (inch)
 
						

							
36Chapter 5  Reference

Connector Pin Assignment
•	 DVI-D	connector	
	
Pin No.SignalPin No.SignalPin No.Signal 
1T.M.D.S. Data 2-9T.M.D.S. Data1-17T.M.D.S. Data0-
2T.M.D.S. Data 2+10T.M.D.S. Data1+18T.M.D.S. Data0+
3T.M.D.S. Data2/4 Shield11T.M.D.S. Data1/3 Shield19T.M.D.S. Data0/5 Shield
4NC*12NC*20NC*
5NC*13NC*21NC*
6DDC Clock (SCL)14+5V Power22T.M.D.S. Clock shield
7DDC Data (SDA)15Ground (return for +5V, Hsync, and Vsync)23T.M.D.S. Clock+
8NC*16Hot Plug Detect24T.M.D.S. Clock-
(NC*: No Connection)
•	 D-Sub	mini	15-pin	connector
	
Pin No.Signal Pin No.Signal Pin No.Signal 
1Red video6Red video ground11NC*
2Green video7Green video ground12Data (SDA)
3Blue video8Blue video ground13H. Sync
4NC*9NC*14V. Sync
5Ground10Ground15Clock (SCL)
(NC*: No Connection)
Accessories List
Cleaning KitEIZO ScreenCleaner
Speaker Uniti•Sound L3*
*	May	not	allowed	to	attach	the	option	speaker	depending	on	the	stand	type.
For	the	latest	information	about	the	accessories,	refer	to	our	web	site.
http://www.eizo.com
 
						

							
37Chapter 5  Reference

5-4 Glossary
Clock
The	analog	input	monitor	needs	to	reproduce	a	clock	of	the	same	frequency	as	the	dot	clock	of	the	graphics	system	in	
use,	when	the	analog	input	signal	is	converted	to	a	digital	signal	for	image	display.	
This	is	called	clock	adjustment.	If	the	clock	pulse	is	not	set	correctly,	some	vertical	bars	appear	on	the	screen.
DDC/CI (Display Data Channel/Command Interface)VESA 	provides	the	standardization	for	the	interactive	communication	of	the	setting	information,	etc.	between	a	PC	
and	the	monitor.
DVI (Digital Visual Interface) DVI	is	a	digital	interface	standard.	DVI	allows	direct	transmission	of	the	PC’s	digital	data	without	loss.
This	adopts	the	 TMDS	transmission	system	and	DVI	connectors.	 There	are	two	types	of	DVI	connectors.	One	is	
a	DVI-D	connector	for	digital	signal	input	only.	 The	other	is	a	DVI-I	connector	for	both	digital	and	analog	signal	
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI	DMPM	is	a	digital	interface	power-saving	function.	 The	“Monitor	ON	(operating	mode)”	and	“Active	Off	
(power-saving	mode)”	are	indispensable	for	DVI	DMPM	as	the	monitor’s	power	mode.
Gain This	is	used	to	adjust	each	color	parameter	for	red,	green	and	blue.	 An	LCD	monitor	displays	the	color	by	the	light	
passing	through	the	panel	color	filter.	Red,	green	and	blue	are	the	three	primary	colors.	 All	the	colors	on	the	screen	
are 	displayed 	by 	combining 	these 	three 	colors. 	The 	color 	tone 	can 	be 	changed 	by 	adjusting 	the 	light 	intensity 	(volume)	
passing	through	each	color’s	filter.
Gamma Generally,	the	monitor	brightness	varies	nonlinearly	with	the	input	signal	level,	which	is	called	“Gamma	
Characteristic”.	 A	small	gamma	value	produces	a	low-contrast	image,	while	a	large	gamma	value	produces	a	high-
contrast	image.
HDCP (High-bandwidth Digital Contents Protection) Digital	signal	coding	system	developed	to	copy-protect	the	digital	contents,	such	as	video,	music,	etc.	 This	helps	
to	transmit	the	digital	contents	safely	by	coding	the	digital	contents	sent	via	DVI	terminal	on	the	output	side	and	
decoding	them	on	the	input	side.
Any	digital	contents	cannot	be	reproduced	if	both	of	the	equipments	on	the	output	and	input	sides	are	not	applicable	
to	HDCP 	system.
Phase
Phase	means	the	sampling	timing	to	convert	the	analog	input	signal	to	a	digital	signal.	Phase	adjustment	is	made	to	
adjust	the	timing.	It	is	recommended	that	phase	adjustment	be	made	after	the	clock	is	adjusted	correctly.
Range AdjustmentRange	adjustment	controls	the	signal	output	levels	to	display	every	color	gradation.	It	is	recommended	that	range	
adjustment	be	made	before	color	adjustment.
ResolutionThe	LCD	panel	consists	of	numerous	pixels	of	specified	size,	which	are	illuminated	to	form	images.	 This	monitor	
consists	of	1920	horizontal	pixels	and	1200	vertical	pixels.	 At	a	resolution	of	1920	x	1200,	all	pixels	are	illuminated	
as	a	full	screen	(1:1).
 
						

							
38Chapter 5  Reference
sRGB (Standard RGB)International	standard	for	“color	reproduction	and	color	space”	among	peripheral	devices	(such	as	monitors,	printers,	
digital	cameras,	scanners).	sRGB	allows	Internet	users	to	closely	match	colors	as	a	simple	color	matching	means	for	
the	Internet	use.
TemperatureColor	temperature	is	a	method	to	measure	the	white	color	tone,	generally	indicated	in	degrees	Kelvin.	 The	screen	
becomes	reddish	at	a	low	temperature,	and	bluish	at	a	high	temperature,	like	the	flame	temperature.
5000K:	Slightly	reddish	white
6500K:	 Warm	white	like	paper	white
9300K:	Slightly	bluish	white
TMDS (Transition Minimized Differential Signaling) A	signal	transmission	system	for	digital	interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA 	provides	the	standardization	of	signals	from	PC	(graphics	board)	for	power	saving	of	PC	monitors.	DPMS	
defines	the	signal	status	between	PC	and	monitor.