Eizo Flexscan Ev2333wh Users Manual
Have a look at the manual Eizo Flexscan Ev2333wh Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Eizo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1Chapter 5 Reference 5 Rotate the stand base in a counterclockwise direction while holding down the protrusion, and then remove the stand base. Downloaded from ManualMonitor.com Manuals
Chapter 5 Reference 5-5 Specifications EV1W LCD Panel23.0-inch (580 mm) TFT color LCD with anti-glare hard coating Viewing angle: Horizontal 170°, Vertical 160° (CR:10 or more) Dot Pitch0.2655mm Horizontal Scan FrequencyAnalog: 31-81kHzDigital (DVI-D/DisplayPort): 31-68kHz Vertical Scan FrequencyAnalog: 55-76Hz (Non-interlace)Digital (DVI-D/DisplayPort): 59-61Hz (Non-interlace)(VGA TEXT: 69-71Hz) Resolution1920 dots × 1080 lines Max. Dot ClockAnalog: 148.5MHzDigital (DVI-D/DisplayPort): 148.5MHz Max. Display ColorApprox. 16.77 million colors (1064.33 million colors/10bit LUT) Display Area (H × V)509.76mm × 286.74mm Power Supply100-120 VAC ±10%, 50/60Hz 0.5A200-240 VAC ±10%, 50/60Hz 0.3A Power ConsumptionScreen Display On32W or less (Speaker working)30W or less (Speaker not working) Power saving mode0.9W or less (for D-Sub single signal input, when stereo mini jack cabl\ e is not connected, [EcoView Sense] : “Off”) Power button Off0.1W or less (when stereo mini jack cable is not connected) Main Power switch Off0W Input Signal ConnectorD-Sub mini 15-pin DVI-D connector (Applicable to HDCP) DisplayPort (Standard V1.1a, applicable to HDCP and 8-bit)Applicable Format (Audio signal)- 2ch linear PCM (32kHz / 44.1kHz / 48kHz /88.2kHz / 96kHz / 176.4kHz/ 192kHz) Analog Input Signal (Sync)Separate, TTL, positive/ negative Analog Input Signal (Video)Analog, Positive (0.7Vp-p/75Ω) Digital Signal (DVI-D) Transmission SystemTMDS (Single Link) Video Signal MemoryAnalog signal: 45 (preset: 19)Digital signal (DVI-D/DisplayPort): 10 Audio OutputSpeaker output: 0.35W (8Ω, THD: 10% or less)Headphone output: 2mW + 2mW Line inputInput impedance : 48 kΩ (typ.)Input level :1.0 Vrms (Max.) Plug & PlayAnalog / Digital (DVI-D) : VESA DDC 2B / EDID structure 1.3Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4 Dimensions (Width) × (Height) × (Depth) Main unit (including FlexStand)547 mm (21.5 inch) × 517.8 - 346.5 mm (20.4 - 13.6 inch) × 236\ - 221 mm (9.3 - 8.7 inch) Main unit (including TriStand)547 mm (21.5 inch) × 442 - 382 mm (17.4 - 15 inch) × 200 mm (\ 7.9 inch) Main unit (without stand)547 mm (21.5 inch) × 332 mm (13.1 inch) × 44 mm (1.73 inch)
Chapter 5 Reference MassMain unit (including FlexStand)Approx. 6.2 kg (13.7 lbs.) Main unit (including TriStand)Approx. 4.6 kg (10.1 Ibs.) Main unit (without stand)Approx. 3.4 kg (7.5 lbs.) Movable rangeFlexStandTilt: 30° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 225 mm (8.9 inch) (171.3 mm (6.7 inch) when Tilt is 0°)Rotation: 90° (clockwise) TriStandTilt: 25° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 60 mm (2.36 inch) Environmental ConditionsTemperatureOperating: 5 °C - 35 °C (41 °F - 95 °F)Storage: -20 °C - 60 °C (-4 °F - 140 °F) HumidityOperating: 20% - 80% R.H. (no condensation)Storage: 10% - 80% R.H. (no condensation) PressureOperating: 700 to 1,060 hPaStorage: 200 to 1,060 hPa EVW LCD Panel23.0-inch (580 mm) TFT color LCD with anti-glare hard coating Viewing angle: Horizontal 178°, Vertical 178° (CR:10 or more) Dot Pitch0.2655mm Horizontal Scan FrequencyAnalog: 31-81kHzDigital (DVI-D/DisplayPort): 31-68kHz Vertical Scan FrequencyAnalog: 55-76Hz (Non-interlace)Digital (DVI-D/DisplayPort): 59-61Hz (Non-interlace)(VGA TEXT: 69-71Hz) Resolution1920 dots × 1080 lines Max. Dot ClockAnalog: 148.5MHzDigital (DVI-D/DisplayPort): 148.5MHz Max. Display ColorApprox. 16.77 million colors (1064.33 million colors/10bit LUT) Display Area (H × V)509.76mm × 286.74mm Power Supply100-120 VAC ±10%, 50/60Hz 0.75A200-240 VAC ±10%, 50/60Hz 0.45A Power ConsumptionScreen Display On45W or less (Speaker working)42W or less (Speaker not working) Power saving mode1W or less (for D-Sub single signal input, when stereo mini jack cable \ is not connected, [EcoView Sense] : “Off”) Power button Off0.1W or less (when stereo mini jack cable is not connected) Main Power switch Off0W Input Signal ConnectorD-Sub mini 15-pin DVI-D connector (Applicable to HDCP) DisplayPort (Standard V1.1a, applicable to HDCP and 8-bit)Applicable Format (Audio signal)- 2ch linear PCM (32kHz / 44.1kHz / 48kHz /88.2kHz / 96kHz / 176.4kHz/ 192kHz) Analog Input Signal (Sync)Separate, TTL, positive/ negative Analog Input Signal (Video)Analog, Positive (0.7Vp-p/75Ω) Digital Signal (DVI-D) Transmission SystemTMDS (Single Link)
Chapter 5 Reference Video Signal MemoryAnalog signal: 45 (preset: 19)Digital signal (DVI-D/DisplayPort): 10 Audio OutputSpeaker output: 0.35W (8Ω, THD: 10% or less)Headphone output: 2mW + 2mW Line inputInput impedance : 48 kΩ (typ.)Input level :1.0 Vrms (Max.) Plug & PlayAnalog / Digital (DVI-D) : VESA DDC 2B / EDID structure 1.3Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4 Dimensions (Width) × (Height) × (Depth) Main unit (including FlexStand)547 mm (21.5 inch) × 517.8 - 346.5 mm (20.4 - 13.6 inch) × 236\ - 221 mm (9.3 - 8.7 inch) Main unit (including TriStand)547 mm (21.5 inch) × 442 - 382 mm (17.4 - 15 inch) × 200 mm (\ 7.9 inch) Main unit (without stand)547 mm (21.5 inch) × 332 mm (13.1 inch) × 47.5 mm (1.87 inch)\ MassMain unit (including FlexStand)Approx. 7.1 kg (15.7 lbs.) Main unit (including TriStand)Approx. 5.5 kg (12.1 Ibs.) Main unit (without stand)Approx. 4.3 kg (9.5 lbs.) Movable rangeFlexStandTilt: 30° Up, 0° Down Swivel: 172° Right, 172° LeftAdjustable height: 225 mm (8.9 inch) (171.3 mm (6.7 inch) when Tilt is 0°)Rotation: 90° (clockwise) TriStandTilt: 25° Up, 0° DownSwivel: 172° Right, 172° LeftAdjustable height: 60 mm (2.36 inch) Environmental ConditionsTemperatureOperating: 5 °C - 35 °C (41 °F - 95 °F)Storage: -20 °C - 60 °C (-4 °F - 140 °F) HumidityOperating: 20% - 80% R.H. (no condensation)Storage: 10% - 80% R.H. (no condensation) PressureOperating: 700 to 1,060 hPaStorage: 200 to 1,060 hPa Main default settings (factory settings) Auto EcoViewOn EcoView SenseOn EcoView IndexOn Smoothing3 FineContrast Mode Custom PowerManager - Power SaveOn Input SignalManual Screen SizeFull Screen Off TimerEnable Menu SettingsMenu SizeNormal Menu Off Timer45 sec Language English
Chapter 5 Reference Outside Dimensions EV1W • FlexStand 517.8(20.4) 81.5 628.5(24.7) 179.9(7.1)263(10.4) 30° 56.1(2.21) 14.5(0.57) 185.8(7.3)243.5(9.6)9.5(0.37) 355(14)411.1(16.2) 465(18.3) 346.5(13.6) 183.7(7.2) 325.4(12.8) 195.5(7.7) 541.3(21.3) 221(8.7) SWIVEL PIVOT TILT 200(7.9) 90° 216(8.5) 172°172° 236(9.3) 288.8(11.4) 24.8(0.98) 332(13.1) 18.4(0.72) 547(21.5)511.8(20.1)17.6(0.69)17.6(0.69) 67.5 107 157.5(6.2) (4.2) (2.66) 21.5(0.85) 44(1.73) 12.4(0.49) (3.21) • TriStand 172°172° 145(5.7) 16(0.63) 60(2.36) 21.5(0.85) 44(1.73) 465(18.3) 288.8(11.4) 24.8(0.98) 332(13.1) 18.4(0.72) 547(21.5)511.8(20.1)17.6(0.69) 382(15) 25° 67.5 107 157.5(6.2)377.8(14.9) 49.9(1.96)67.9(2.67) 190(7.5)142.5(5.6) 57.6(2.27)12.4(0.49) 442(17.4) φ200(7.9) SWIVEL TILT (4.2) (2.66) unit : mm (inch) unit : mm (inch)
6Chapter 5 Reference EVW • FlexStand 517.8(20.4) 81.5 628.5(24.7) 183.4(7.2)266(10.5) 30° 52.6(2.07) 14.5(0.57) 185.8(7.3)243.5(9.6)9.5(0.37) 355(14)411.1(16.2) 465(18.3) 346.5(13.6) 183.7(7.2) 325.4(12.8) 199(7.8) 542.8(21.4) 221(8.7) SWIVEL PIVOT TILT 200(7.9) 90° 216(8.5) 172°172° 236(9.3) 288.8(11.4) 24.8(0.98) 332(13.1) 18.4(0.72) 547(21.5)511.8(20.1)17.6(0.69)17.6(0.69) 67.5 107 157.5(6.2) (4.2) (2.66) 25(0.98) 47.5(1.87) 12.4(0.49) (3.21) • TriStand 172°172° 145(5.7) 16(0.63) 60(2.36) 25(0.98) 47.5(1.87) 465(18.3) 288.8(11.4) 24.8(0.98) 332(13.1) 18.4(0.72) 547(21.5)511.8(20.1)17.6(0.69) 382(15) 25° 67.5 107 157.5(6.2)379.3(14.9) 49.9(1.96)67.9(2.67) 193(7.6)146(5.7) 54.1(2.13)12.4(0.49) 442(17.4) φ200(7.9) SWIVEL TILT (4.2) (2.66) unit : mm (inch) unit : mm (inch)
7Chapter 5 Reference Connector Pin Assignment • DVI-D connector Pin No.SignalPin No.SignalPin No.Signal 1T.M.D.S. Data 2-9T.M.D.S. Data1-17T.M.D.S. Data0- 2T.M.D.S. Data 2+10T.M.D.S. Data1+18T.M.D.S. Data0+ 3T.M.D.S. Data2/4 Shield11T.M.D.S. Data1/3 Shield19T.M.D.S. Data0/5 Shield 4NC*12NC*20NC* 5NC*13NC*21NC* 6DDC Clock (SCL)14+5V Power22T.M.D.S. Clock shield 7DDC Data (SDA)15Ground (return for +5V, Hsync, and Vsync)23T.M.D.S. Clock+ 8NC*16Hot Plug Detect24T.M.D.S. Clock- (NC*: No Connection) • D-Sub mini 15-pin connector Pin No.Signal Pin No.Signal Pin No.Signal 1Red video6Red video ground11NC* 2Green video7Green video ground12Data (SDA) 3Blue video8Blue video ground13H. Sync 4NC*9NC*14V. Sync 5Ground10Ground15Clock (SCL) (NC*: No Connection) • DisplayPort connector 135791113151719 2468101214161820 Pin No.Signal Pin No.Signal Pin No.Signal 1ML Lane3-8Ground15AUX CH+ 2Ground9ML Lane1+16Ground 3ML Lane3+10ML Lane0-17AUX CH- 4ML Lane2-11Ground18Hot Plug Detect 5Ground12ML Lane0+19Return 6ML Lane2+13CONFIG120DP PWR 7ML Lane1-14CONFIG2 Accessories List Cleaning KitEIZO ScreenCleaner Signal Cable (DisplayPort)PP200 For the latest information about the accessories, refer to our web site. http://www.eizo.com Downloaded from ManualMonitor.com Manuals
8Chapter 5 Reference -6 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequenc\ y as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DDC/CI (Display Data Channel/Command Interface) VESA provides the standardization for the interactive communication of the setting information, etc. between a PC and the monitor. DisplayPort VESA provides the digital interface standard for the digital display device. DisplayPort can transfer the video signal up to 16 bits for each channel of RGB, and the audio signal too. (This monitor supports the 8-bit video signal only .) DVI (Digital Visual Interface) DVI is a digital interface standard. DVI allows direct transmission of the PC’ s digital data without loss. This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal inputs. DVI DMPM (DVI Digital Monitor Power Management) DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off (power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode. Gain This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume) passing through each color’s filter. Gamma Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a high- contrast image. HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system. Overdirve This technology enhances response speed by increasing the potential difference at the time of motion of liquid-crystal pixels, and it is used for liquid-crystal TV sets and others in general. It provides clear-cut three-dimensional display with little image lag, by improving response speed of the intermediate graduation range that frequently appears in moving images. Phase Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly .
9Chapter 5 Reference Range Adjustment Range adjustment controls the signal output levels to display every color gradation. It is recommended that range adjustment be made before color adjustment. Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1920 horizontal pixels and 1080 vertical pixels. At a resolution of 1920 × 1080, all pixels are illuminated as a full screen (1:1). sRGB (Standard RGB) International standard for “color reproduction and color space” am\ ong peripheral devices (such as monitors, printers, digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for the Internet use. Temperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature. 5000K: Slightly reddish white 6500K: Warm white like paper white 9300K: Slightly bluish white TMDS (Transition Minimized Differential Signaling) A signal transmission system for digital interface. VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS defines the signal status between PC and monitor.
0Chapter 5 Reference -7 Preset Timing The following table shows factory preset video timing (for analog signal only). ModeDot clock Frequency PolarityHorizontal: kHz Vertical: Hz VGA 640×[email protected] MHzHorizontal31.47Negative Vertical59.94Negative VGA TEXT 720×[email protected] MHzHorizontal31.47Negative Vertical70.09Positive VESA 640×[email protected] MHzHorizontal37.86Negative Vertical72.81Negative VESA 640×[email protected] MHzHorizontal37.50Negative Vertical75.00Negative VESA 800×[email protected] MHzHorizontal35.16Positive Vertical56.25Positive VESA 800×[email protected] MHzHorizontal37.88Positive Vertical60.32Positive VESA 800×[email protected] MHzHorizontal48.08Positive Vertical72.19Positive VESA 800×[email protected] MHzHorizontal46.88Positive Vertical75.00Positive VESA 1024×[email protected] MHzHorizontal48.36Negative Vertical60.00Negative VESA 1024×[email protected] MHzHorizontal56.48Negative Vertical70.07Negative VESA 1024×[email protected] MHzHorizontal60.02Positive Vertical75.03Positive VESA 1152×[email protected] MHzHorizontal67.50Positive Vertical75.00Positive CEA-861 1280×[email protected] MHzHorizontal45.00Positive Vertical60.00Positive VESA 1280×960@60Hz 108.0 MHzHorizontal60.00Positive Vertical60.00Positive VESA 1280×1024@60Hz 108.0 MHzHorizontal63.98Positive Vertical60.02Positive VESA 1280×1024@75Hz 135.0 MHzHorizontal79.98Positive Vertical75.03Positive VESA CVT 1680×1050@60Hz 146.3 MHzHorizontal65.29Negative Vertical59.95Positive VESA CVT RB1680×1050@60Hz 119.0 MHzHorizontal64.67Positive Vertical59.88Negative CEA-861 1920×1080@60Hz 148.5 MHzHorizontal67.50Positive Vertical60.00Positive Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment. • When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Adjustment menu.