Eizo Flexscan Ev2023w Users Manual

							
1Chapter 2  Settings and Adjustments

●	To	adjust	the	hue	[Hue]
This function allows you to adjust the hue. If you set the hue to a high value, 
the image turns greenish. If low, the image turns purplish.
Adjustable range: -32 to 32
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  adjustment menu appears.
(3) Adjust the hue with  or , and press .
The adjustment is completed.
●	To	adjust	the	gain	value	[Gain]
Each luminance of red/green/blue composing the color is called “Gain”.  The 
gain adjustment may change the color tone of the “White”.
Adjustable range: 0 to 100%
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  adjustment menu appears.
(3) Adjust the respective value of Red, Green or Blue with  or , and press 
.
The adjustment is completed.
-	 Adjusting	Volume	[Volume]
This function allows you to adjust volume up or down.
Adjustable range: 0 to 20
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The volume adjustment menu appears.
(3) Adjust the volume with  or , and press .
The adjustment is completed.
-	 Turning	off	the	audio	output	at	 Power	
Saving	mode	[Power	Save]
This monitor allows you to turn off the audio output from the speakers/
headphone at the power saving mode.
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select “On” or “Off” with  or , and press .
The setting is completed.
Attention
• This function does not enable to 
display every color gradation.
NOTE
• You cannot adjust the value if the 
icon is not displayed, depending on 
the FineContrast mode selected. (See 
“Adjustment items in each mode” on 
page 19.)
Attention
• This function does not enable to 
display every color gradation.
NOTE
• You cannot adjust the value if the 
icon is not displayed, depending on 
the FineContrast mode selected. (See 
“Adjustment items in each mode” on 
page 19.)
Attention
• This function does not enable to 
display every color gradation.
NOTE
• You cannot adjust the value if the 
icon is not displayed, depending on 
the FineContrast mode selected. (See 
“Adjustment items in each mode” on 
page 19.)
•  The gain value may change depending 
on the value of the color temperature.
•  When changing the gain value, the 
color temperature adjusting range is 
changed to “Off”.
Attention
• This function does not enable to 
display every color gradation.
NOTE
• You cannot adjust the value if the 
icon is not displayed, depending on 
the FineContrast mode selected. (See 
“Adjustment items in each mode” on 
page 19.)
•  The gain value may change depending 
on the value of the color temperature.
•  When changing the gain value, the 
color temperature adjusting range is 
changed to “Off”.
NOTE
• You can also adjust the brightness by 
using the direct menu (Refer to "1-4 
Functions and Basic Operation" on 
page 10).
NOTE
• You can also adjust the brightness by 
using the direct menu (Refer to "1-4 
Functions and Basic Operation" on 
page 10).
 
						

							
Chapter 2  Settings and Adjustments

-6	 Setting	On/Off	for	Power	Saving	mode	[Power	Save]
This function allows you to set the monitor into the power saving mode 
according to the PC status. When the monitor has shifted to the power saving 
mode, the images on the screen are not displayed.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select “On” or “Off” with  or , and press .
The setting is completed.
■	 Analog	input
This monitor complies with the VESA DPMS standard.
[Power	Saving	System]
PCMonitor Power	Indicator
OperatingOperatingBlue
Power savingSTAND-BY 
SUSPENDED OFF
Power savingOrange
■	 Digital	input	
This monitor complies with the DVI DMPM standard.
[Power	Saving	System]
The monitor enters the power saving mode in five seconds in connection with 
the PC setting.
PCMonitor
Power	Indicator
OperatingOperatingBlue
Power savingPower savingOrange
-7	 Turning	off	the	monitor	automatically	
[Off	Timer]
This function allows you to switch the setting to turn off the monitor 
automatically after a specified time has passed at the power saving mode.
 Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 
1-5h)
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select “Enable” or “Disable” with  or .
  When selecting “Enable”, set a monitor Off time with 
 or .
(4) Press .
The setting is completed.
Attention
• Turning off the main power switch 
or unplugging the power cord 
completely shuts off power supply to 
the monitor.
•  Power consumption varies even 
when the stereo mini jack cable is 
connected.
Attention
• Turning off the main power switch 
or unplugging the power cord 
completely shuts off power supply to 
the monitor.
•  Power consumption varies even 
when the stereo mini jack cable is 
connected.
 
						

							
Chapter 2  Settings and Adjustments

-8	 Setting	On/Off	for	the	automatic	brightness	adjustment	function	
	
[Auto	EcoView]
The sensor on the front side of the monitor detects the environmental brightness 
to adjust the screen brightness automatically and comfortably by using the  Auto 
EcoView function.
(1) Press 
.
The  setting menu appears.
(2) Choose "Auto EcoView" with  or . (You can also choose it with .)
(3)  Select “On” or “Off” with 
 or , and press .
-9	 Shifting	to	the	power	saving	mode	
when	a	person	leaves	the	monitor	
[EcoView	Sense]
The sensor on the front side of the monitor detects the movement of a person by 
using the EcoView Sense function. When a person moves away from the 
monitor, it shifts to the power saving mode automatically and does not display 
the images on the screen to reduce the power consumption. When a person 
comes near the monitor again, it comes back from the power saving mode and 
displays the images. The detection level of the EcoView Sense sensor can be 
changed according to the environment of usage.
●	To	set	EcoView	Sense	On/Off
(1) Press .
The  setting menu appears.
(2) Choose "EcoView Sense" with  or . (You can also choose it with .)
(3)  Select “On” or “Off” with 
 or , and press .
●	To	change	the	detection	level
The default setting is "Auto". If the monitor does not shift to the power saving 
mode as you intended, change the detection level according to the following 
procedure.
Adjustable range: see below list
Level Detectable	RangeDetails
Auto  
(default setting)
Automatic setting  
(120 cm or less) 
The detectable range is defined by the person's movement. When you get out of the range, the monitor shifts to the power saving mode. Since the function determines whether the object is moving or not, the monitor can shift to the power saving mode even if there is a chair or wall in the detectable range.
Manual1Automatic setting (90 cm or less)
Manual2120 cm or lessWhen you get out of the detectable range, the monitor shifts to the power saving mode. This setting is recommended if the monitor frequently shifts to the power saving mode when the level is "Auto" or "Manual1" even though you are in front of the monitor.
Manual390 cm or less
NOTE
• 
Be careful not to block the sensor on 
the lower side of the monitor when 
using the Auto EcoView function.
NOTE
• Be careful not to block the sensor on 
the lower side of the monitor when 
using the Auto EcoView function.
NOTE
• When the orientation of the 
Adjustment menu is set to "Portrait", 
the EcoView Sense is turned off (see 
2-13 "Setting Orientation" on page 
27). Change the setting to on.
NOTE
• When the orientation of the 
Adjustment menu is set to "Portrait", 
the EcoView Sense is turned off (see 
2-13 "Setting Orientation" on page 
27). Change the setting to on.
NOTE
• If any moving object has not been 
detected for a certain period of 
time when the detection level is set 
to "Auto" or "Manual1", the icon 
appears that indicates the monitor is 
shifting to the power saving mode.
NOTE
• If any moving object has not been 
detected for a certain period of 
time when the detection level is set 
to "Auto" or "Manual1", the icon 
appears that indicates the monitor is 
shifting to the power saving mode.
 
						

							
Chapter 2  Settings and Adjustments

(1) Choose  from the Adjustment menu, and press .
(2)  Choose  from the  menu, and press 
.
The  setting menu appears.
(3) Select "Auto" or "Manual" with  or .
  When selecting "Manual", select 1, 2 or 3 for the detection level of the 
sensor with  or .
(4) Press .
The setting is completed.
-10	 Setting	On/Off	for	the	power	saving	
level	indicator	[EcoView	Index]
By using the EcoView Index function, the indicator that shows the level of 
power saving appears at the time of turning on the monitor, adjusting the 
brightness or switching the FineContrast mode.
The power saving ratio comes to high as the indicator level meter lights towards 
right.
(1) Press 
.
The  setting menu appears.
(2) Choose "EcoView Index" with  or . (You can also choose it with .)
(3)  Select “On” or “Off” with 
 or , and press .
NOTE
• EcoView Index is available only when 
the monitor is used with "Landscape" 
position. When the monitor is 
used with "Portrait" position (the 
orientation of the Adjustment menu is 
set to "Portrait"), neither indicator nor 
setting menu appear.
NOTE
• EcoView Index is available only when 
the monitor is used with "Landscape" 
position. When the monitor is 
used with "Portrait" position (the 
orientation of the Adjustment menu is 
set to "Portrait"), neither indicator nor 
setting menu appear.
 
						

							
Chapter 2  Settings and Adjustments

-11	 Screen	Size	Selection
●	To	change	screen	size	[Screen	Size]
The image with the resolution other than the recommended resolution is 
displayed in full screen automatically. You can change the screen size by using 
 from  menu.
MenuFunction
Full Screen (default setting)
Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate.
EnlargedDisplays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate.
NormalDisplays images with the specified resolution.
Example: Image size 1024 × 768 in case of EV2023W
Full Screen(Default setting)EnlargedNormal
(1600 × 900)(1200 × 900)(1024 × 768)
(1) Choose  from the Adjustment menu, and press .
(2)  Choose  from the  menu, and press 
.
The screen size setting window appears.
(3) Select “Full Screen,” “Enlarged,” or “Normal” with  or , and  
press .
The screen size setting is completed.
●	To	adjust	brightness	of	non-display	area	[Border	Intensity]
A border (black area with no image) around the image appears in the “Normal” 
or “Enlarged” mode.
Border
(1) Choose  from the Adjustment menu, and press .
(2)  Choose  from the  menu, and press 
.
The  menu appears.
(3) Adjust border intensity with  or , and press .
The border intensity adjustment is completed.
Attention
• Selecting [Enlarged] or [Normal] 
does not enable to display every color 
gradation.
Attention
• Selecting [Enlarged] or [Normal] 
does not enable to display every color 
gradation.
     
						

							
6Chapter 2  Settings and Adjustments

-1	 Setting	Adjustment	Menu	Display
●	To	update	menu	settings	[Menu	Size/Menu	Position/Menu	
Off	Timer/Translucent]
Menu	Size
Change the Adjustment menu size using the following procedure.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4) Select “Normal” or “Enlarged” with  or , and press .
The setting is completed.
Menu	Position
Adjust the menu position using the following procedure.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4) Select a menu position with  /  /  / , and press .
The setting is completed.
Menu	Off	Timer
Set the menu display time using the following procedure.
 Adjustment range: Disable, Enable (15, 30, 45, 60s)
(1)  Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4) Select “Enable” or “Disable” with  or .
  When selecting “Enable”, choose a time for displaying menu with 
 or 
.
(5)  Press 
.
The setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
(3)  Choose  from the  menu, and press 
.
The  menu appears.
(4) Adjust the transparency for menu display with  or , and press .
The setting is completed.
NOTE
• The display time of the FineContrast 
mode, EcoView menu and EcoView 
Index remains unchanged.
NOTE
• The display time of the FineContrast 
mode, EcoView menu and EcoView 
Index remains unchanged.
 
						

							
7Chapter 2  Settings and Adjustments

-1	 Setting	Orientation
●	To	set	the	orientation	of	the	Adjustment	menu	[Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the Others menu, and press 
.
The  menu appears.
(3) Select “Landscape” or “Portrait” with  or , and press .
The setting is completed.
(4) When selecting “Portrait”, turn the monitor screen 90° in clockwise 
direction.
-1	 Locking	Buttons
This function allows you to lock  to prevent changing the adjusted/set status.
(1)  Press 
 to turn off the monitor.
(2)  Press 
 holding  down to turn on the monitor.
The Lock/Unlock setting is toggled by performing the operation in step 2.
-1	 Displaying	Monitor	Information 		
[Information]
This function allows you to display the input signal status, current resolution 
and model name.
Information 1/3 :   Input signal status , resolution and H/V frequency
Information 2/3 :   Enable/Disable setting for DDC/CI
Information 3/3 :   Model name, serial number and usage time
(1)  Choose  from the Adjustment menu, and 
press .
The  menu appears.
(2) Then, press  to check settings, etc.
NOTE
• For using the monitor with 
“Portrait” position, the graphics 
board supporting portrait display is 
required. When placing the monitor in 
a "Portrait" position, settings of your 
graphics board need to be changed. 
Refer to the manual of the graphics 
board for details.
NOTE
• For using the monitor with 
“Portrait” position, the graphics 
board supporting portrait display is 
required. When placing the monitor in 
a "Portrait" position, settings of your 
graphics board need to be changed. 
Refer to the manual of the graphics 
board for details.
NOTE
• The usage time is not always “0” 
when you purchase the monitor due 
to factory inspection.
NOTE
• The usage time is not always “0” 
when you purchase the monitor due 
to factory inspection.
 
						

							
8Chapter 2  Settings and Adjustments

-16	 Enabling/Disabling	DDC/CI	communication	[DDC/CI]
This function allows you to enable/disable the DDC/CI communication.
(1)  Press 
 to turn off the monitor.
(2)  Press 
 holding  down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
-17	 Setting	Power	Indicator	ON/OFF		
[Power	Indicator]
This function allows you to set the power indicator (blue) ON/OFF in the 
monitor ON condition.
(1)  Choose 
 from the Adjustment menu, and press .
(2) 
Choose  from the  menu, and press .
The  menu appears.
(3)  Select “Enable” or “Disable” with  or , and press .
The setting is completed.
-18	 Setting	Language	[Language]
This function allows you to select a language for the adjustment menu or 
displaying message.
Selectable	languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
(1) Choose  menu from the Adjustment menu, and 
press .
The  menu appears.
(2) Choose a language with  /  /  / , and press .
The setting is completed.
-19	 Setting	EIZO	logo	display	ON/OFF
The EIZO logo appears on the display when turning on the monitor . This 
function allows you to display, or not, the EIZO logo.
(1) Press 
 to turn off the monitor.
(2)  Press 
 holding  down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
NOTE
• You can check the DDC/CI setting in 
the  menu.
NOTE
• You can check the DDC/CI setting in 
the  menu.
 
						

							
9Chapter 2  Settings and Adjustments

-0	 Resuming	the	Default	Setting	[Reset]
There are two types of Reset. One is to reset the color adjustment only to the 
default settings, and the other is to reset all the settings to the default settings.
●	To	reset	color	adjustment	values
Only the adjustment values in the current FineContrast mode will revert to the 
default settings (factory settings).
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu and press 
.
The  menu appears.
(3) Select  with  or , and press .
The color adjustment values revert to the default settings.
●	To	reset	all	adjustments	to	the	factory	default	settings
Reset all adjustments to the factory default settings.
(1) Choose  from the Adjustment menu, and press 
.
(2)  Choose  from the  menu, and press 
.
The  menu appears.
(3) Select  with  or , and press .
All setting values revert to the default settings.
Attention
• After resetting, you cannot undo the 
operation.
Attention
• After resetting, you cannot undo the 
operation.
NOTE
• For main default settings, refer 
to “Main default settings (factory 
settings)” on page 43.
NOTE
• For main default settings, refer 
to “Main default settings (factory 
settings)” on page 43.
 
						

							
0Chapter 3  Connecting Cables

-1	 Connecting	Two	PCs	to	the	Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub 
mini 15 pin connector on the back of the monitor.
Connection	examples
Signal cable (Digital) FD-C39
Signal cable MD-C87
DVI-D connectorD-Sub mini15-pin Connector
D-Sub mini 15-pin ConnectorDVI connector
To PC 2To PC 1
●	To	switch	the	input	signal
The input signal switches each time  is pressed.
When the signal is switched, the active input port name appears at the top right 
corner of the screen.
Chapter		 Connecting	Cables
Downloaded	from	ManualMonitor.com	Manuals