Eizo Coloredge Cg275w Users Manual

11Chapter1Introduction
2. Adjusting/Setting
1. Choose a menu to adjust/set with ,, and then press .
2. Choose an item to adjust/set with ,, and then press .
3. Adjust/set the selected item with ,, and then press .
3. Exiting
1. Press  a few times. The Adjustment menu finishes.
 ●Showing Button Guide
Press the front buttons (except  button), the button guide appears above the button.
(When using the monitor with “Portrait” position, the button guide appears next to the button.)
Note
• The button guide...

12Chapter1Introduction
 ●Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menuSetting Reference
ColorBrightness“2-3.  Adjusting  Color”  (page  16)
Contrast
Temperature
Gamma
Advanced
S

ettingsHue
Saturation
OutlineEnhancer
Gain
BlackLevel
6Colors
ColorReset “ 3-10.  Return  To  Default  Setting”  (page  28)
SelfCalibration
Execute “4-2.  Executing  SelfCalibration  “Execute”” 
(p

age  32)
ResultCalibrationResult“ 4-3.  Setting ...

13Chapter1Introduction
ToolsInputSelection“ Tos eti nputs ignals election“ InputS election”” 
(p

age  42)
InputSkip“ 3-9.  To  Disable  Input  Signal  “Input  Skip”” 
(p

age  28)
ModePreset“ 3-1.  Enabling/Disabling  Mode  Selection 
“

Mode  Preset””  (page  23)
SignalInfo“ 7- 4.D isplayingm onitorin formation”( page4 4)
MonitorInfo
AllReset“ 3-10.  Return  To  Default  Setting”  (page  28)
*The
 adjustment/settings  available  on  “Color”  depend  on ...

14Chapter2Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions
The monitor supports the following resolutions.
 ●Digital Input (DVI-D: Single Link)
Resolution Applicable Signals Vertical Scan 
Frequency Dot Clock
640×480
V GA60  Hz
162  MHz
(Max.)
720
 ×  400 VGA
 TEXT70
 Hz
800
 ×  600 VESA 60
 Hz
1024
 ×  768 VESA 60
 Hz
1280
 ×  960 VESA 60
 Hz
1280
 ×  1024 VESA 60
 Hz
1600
 ×  1200 VESA 60
 Hz
1920
 ×  1080
*11080p@50 50  Hz
1920

×

1080 CEA-861...

15Chapter2Adjusting Screens
2-2. Setting the Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to change 
the resolution, follow the procedure below.
 ●Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2.
 
F
 rom the displayed menu, click “Screen resolution”.
3.
 
O
 n the “Screen Resolution” dialog box, select the monitor.
4.
 
C
 lick “Resolution” to select the desired resolution.
5.
 
C
 lick the “OK” button.
6....

16Chapter2Adjusting Screens
2-3. Adjusting Color
 ●To select the display mode (color mode)
This function allows easy selection of a desired mode according to monitor application.
Color Mode
Mode Purpose
1-Custom Available for  the  color  settings  according  to  your  preference.
2-Adobe  RGB Suitable  for  color  matching  with  Adobe  RGB  compatible  peripherals.
3-sRGB Suitable
 for  color  matching  with  sRGB  compatible  peripherals.
4-EBU Suitable
 for  reproducing ...

17Chapter2Adjusting Screens
 ●To perform advanced adjustments
“Color” of the Adjustment menu allows you to configure and save a separate set of color settings for each 
mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more 
after turning the monitor power on before starting adjustment.
•
 
T
 he same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. 
Make fine color...

18Chapter2Adjusting Screens
 ●To adjust contrast “Contrast”
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100%
Procedure
1.
 
C
 hoose “Color” from the Adjustment menu, and press 
.
2.
 
C

hoose “Contrast” from “Color”, and press 
.
“Contrast” appears.
3. Use  or  for adjustment.
4.
 
P

ress 
 to exit.
Note
• In the contrast of 100%, every color gradation is displayed.
•  
W
 hen adjusting the monitor, it is recommended to perform the brightness...

19Chapter2Adjusting Screens
 ●To adjust gamma “Gamma”
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the 
variation rate is not proportional to the input signal. To keep the balance between the input signal and the 
brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.6 to 2.7
Procedure
1.
 
C
 hoose “Color” from the Adjustment menu, and press 
.
2.
 
C

hoose “Gamma” from “Color”, and press 
.
3.
 
U

se 
 or  for...

20Chapter2Adjusting Screens
 ●To enhance outline of image “Outline Enhancer”
OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between 
pixels composing the images. This may improve the texture of the material and its feel of the images. On the 
contrary, it also functions to reproduce the images smoothly by gradating its outline.
Procedure
1.
 
C
 hoose “Color” from the Adjustment menu, and press 
.
2.
 
C

hoose “Advanced Settings” from “Color”, and...