Eizo Coloredge Cg243w Users Manual

41Chapter 6  Reference
Analog Input Signal (Sync) Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)  Analog, Positive (0.7Vp-p/75Ω)
Digital Signal (DVI) Transmission System TMDS (Single Link)
Max. Video 
Signal Memory  Analog 
45 (preset: 9)
Plug & Play Analog / Digital (DVI-I) : VESA DDC 2B / EDID structure 1.3
Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4
Dimensions Main unit   (Height adjustable stand) 566 mm (22.3 inch) × 456 - 538 mm...

42Chapter 6  Reference
Outside Dimensions
CG223W
Unit: mm (inch)
  

43Chapter 6  Reference
Outside Dimensions
CG243W
• Height adjustable stand
Unit: mm (inch)
  

44Chapter 6  Reference
•
 
F

lexStand
Unit: mm (inch)
638 (25.1)
566 (22.3)520.4 (20.5)22.8 (0.90)22.8 (0.90)
(20.5 (0.81))
326 (12.8)
(20.5 (0.81))
538.5 (21.2)
90 
532 (20.9)
85 (3.35)56.3
 (2.22)
95 (3.74)
72 (2.83)
30 
171.5 (6.8)14.5 (0.57)
235.5 (9.3)36 (1.42)
9.5 (0.37)
355 (13.0)411.1 (16.2)
256 (10.1)
172 172 
100 (3.9)233 (9.2))233 (9.2)
100 (3.9)
133.5 (5.3)
133.5 (5.3)
pivot
tilt
swivel
swivel
544.1 (21.4)
372.6 (14.7)
183.5 (7.2)
571 (22.5)236 (9.3)229 (9.0)
371 (14.6)351 (13.8)
45.6...

45Chapter 6  Reference
Connector Pin Assignment
• DVI-I connector
123
4
56
78
910 11 12
1314 15
16
19 20 21
17 18 22 23 24C1C2C3C4
C5
Pin 
No. Signal Pin 
No. Signal Pin 
No. Signal 
1 T.M.D.S. Data 2- 11 T.M.D.S. Data1/3 Shield  21 NC*
2 T.M.D.S. Data 2+  12 NC* 22 T.M.D.S. Clock shield
3 T.M.D.S. Data2/4 Shield  13 NC* 23 T.M.D.S. Clock+
4 NC* 14 +5V Power  24 T.M.D.S. Clock-
5 NC* 15 Ground (return for +5V, 
Hsync, and Vsync) C1 Analog Red
6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green
7 DDC...

46Chapter 6  Reference
6-6. Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the 
graphics system in use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the 
screen.
DisplayPort
DisplayPort is a next-generation digital AV interface that allows connection of the PC, audio, imaging
devices, etc. to the monitor....

47Chapter 6  Reference
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. 
This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on 
the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of 
the equipments on the output and input sides are not applicable to HDCP system.
Phase
Phase means the sampling...

48Chapter 6  Reference
6-7. Preset Timing
The following table shows factory preset video timing (for analog signal only).
Attention
• Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu.
•
 
I
 f a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, 
screen display may still be incorrect even after the adjustment.
•
 
W
 hen interlace signals are used, the screen cannot be...

49 
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according to 
some of the strictest quality and environmental requirements in the world. 
This makes for a high performance product, designed with the user in focus 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements: Ergonomics●
 Good visual er

gonomics and image quality in order to...

50 
For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of Conformity
We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone:  (562) 431-5011
declare that the product Trade name:  EIZO
Model:  ColorEdge CG223W / CG243W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received,...