Eizo Coloredge Cg223w Users Manual

							41Chapter 6  Reference
Analog Input Signal (Sync) Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video)  Analog, Positive (0.7Vp-p/75Ω)
Digital Signal (DVI) Transmission System TMDS (Single Link)
Max. Video 
Signal Memory  Analog 
45 (preset: 9)
Plug & Play Analog / Digital (DVI-I) : VESA DDC 2B / EDID structure 1.3
Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4
Dimensions Main unit   (Height adjustable stand) 566 mm (22.3 inch) × 456 - 538 mm (18.0 - 21.2 inch) × 230 mm  
(9.1 inch)
Main unit (FlexStand) 566 mm (22.3 inch) × 381.5 - 538.5 mm (15.0 - 21.2 inch) × 242 - 256  mm (9.5 - 10.1 inch)
Main unit (without stand) 566 mm (22.3 inch) × 367 mm (14.4 inch) × 85 mm (3.4 inch)
Mass Main unit  
(Height adjustable stand) Approx. 10.7 kg (23.6 lbs.)
Main unit (FlexStand) Approx. 10.1 kg (22.3 lbs.)
Main unit (without stand)  Approx.7.1 kg (15.7 lbs.)
Movable range Height adjustable stand Tilt: 40° Up, 0° Down
Swivel : 35° Right, 35° Left
Adjustable height : 82 mm (3.23 inch)
Rotation : 90° (clockwise)
FlexStand Tilt: 30° Up, 0° Down
Swivel : 172° Right, 172° Left
Adjustable height : 225 mm (8.9 inch) (Tilt 0°: 157mm (6.2 inch))
Rotation : 90° (clockwise)
Environmental 
Conditions Temperature 
Operating: 0 °C - 35 °C (32 °F - 95 °F)
Transportation/Storage: -20 °C - 60 °C (- 4 °F - 140 °F)
Humidity Operating: 20% - 80% R.H. (no condensation)
Transportation/Storage: 10% - 80% R.H. (no condensation)
Pressure Operating: 700 to 1,060 hPa
Transportation/Storage: 200 to 1,060 hPa
USB  Standard  USB Specification Revision 2.0
Port  Upstream port × 1, Downstream port × 2
Communication Speed  480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Supply current  Downstream: Max. 500mA /1 port
Main default settings (factory settings)
Color Mode Custom
PowerManager  On
Input Selection Manual
Screen Size Fulll
Auto EcoView Off
Outline Enhancer 0
Menu Position Center
Language  English
  
						

							42Chapter 6  Reference
Outside Dimensions
CG223W
Unit: mm (inch)
  
						

							43Chapter 6  Reference
Outside Dimensions
CG243W
• Height adjustable stand
Unit: mm (inch)
  
						

							44Chapter 6  Reference
•
 
F

lexStand
Unit: mm (inch)
638 (25.1)
566 (22.3)520.4 (20.5)22.8 (0.90)22.8 (0.90)
(20.5 (0.81))
326 (12.8)
(20.5 (0.81))
538.5 (21.2)
90 
532 (20.9)
85 (3.35)56.3
 (2.22)
95 (3.74)
72 (2.83)
30 
171.5 (6.8)14.5 (0.57)
235.5 (9.3)36 (1.42)
9.5 (0.37)
355 (13.0)411.1 (16.2)
256 (10.1)
172 172 
100 (3.9)233 (9.2))233 (9.2)
100 (3.9)
133.5 (5.3)
133.5 (5.3)
pivot
tilt
swivel
swivel
544.1 (21.4)
372.6 (14.7)
183.5 (7.2)
571 (22.5)236 (9.3)229 (9.0)
371 (14.6)351 (13.8)
45.6 (1.80)
151 (5.9)
355 (13.0)
115 (4.5)
220 (8.7)
  
						

							45Chapter 6  Reference
Connector Pin Assignment
• DVI-I connector
123
4
56
78
910 11 12
1314 15
16
19 20 21
17 18 22 23 24C1C2C3C4
C5
Pin 
No. Signal Pin 
No. Signal Pin 
No. Signal 
1 T.M.D.S. Data 2- 11 T.M.D.S. Data1/3 Shield  21 NC*
2 T.M.D.S. Data 2+  12 NC* 22 T.M.D.S. Clock shield
3 T.M.D.S. Data2/4 Shield  13 NC* 23 T.M.D.S. Clock+
4 NC* 14 +5V Power  24 T.M.D.S. Clock-
5 NC* 15 Ground (return for +5V, 
Hsync, and Vsync) C1 Analog Red
6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green
7 DDC Data (SDA)  17 T.M.D.S. Data0- C3 Analog Blue
8 Analog Vertical Sync  18 T.M.D.S. Data0+ C4 Analog Horizontal Sync
9 T.M.D.S. Data1-  19 T.M.D.S. Data0/5 Shield C5 Analog Ground(analog 
R,G,&B return)
10 T.M.D.S. Data1+ 20 NC*
 ( NC*: No Connection)
• DisplayPort connector
135791113151719
2468101214161820
Pin No.SignalPin No.SignalPin No.Signal
1 ML Lane3- 8 Ground15 AUX CH+
2 Ground 9 ML Lane1+16 Ground
3 ML Lane3+ 10 ML Lane0- 17 AUX CH-
4 ML Lane2- 11 Ground 18 Hot Plug Detect
5 Ground 12 ML Lane0+ 19 Return
6 ML Lane2+ 13 CONFIG1 20 DP PWR
7 ML Lane1- 14 CONFIG2
• USB port
Upstream
Series A connector
Series B connector Downstream
Contact No. 
Signal  Remarks
1 VCC Cable power
2 - Data Serial data
3 + Data Serial data
4 Ground Cable ground
  
						

							46Chapter 6  Reference
6-6. Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the 
graphics system in use, when the analog input signal is converted to a digital signal for image display. 
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the 
screen.
DisplayPort
DisplayPort is a next-generation digital AV interface that allows connection of the PC, audio, imaging
devices, etc. to the monitor. One cable can transfer sound with images.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss. 
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. 
One is a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and 
analog signal inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and 
“Active Off (power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color 
by the light passing through the panel color filter. Red, green and blue are the three primary colors. All 
the colors on the screen are displayed by combining these three colors. The color tone can be changed by 
adjusting the light intensity (volume) passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma 
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value 
produces a highcontrast image.
  
						

							47Chapter 6  Reference
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. 
This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on 
the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of 
the equipments on the output and input sides are not applicable to HDCP system.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment 
is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted 
correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended 
that range adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. 
This monitor consists of 1680(CG223W) / 1920(CG243W) horizontal pixels and 1050(CG223W) / 
1200(CG243W) vertical pixels. At a resolution of 1680 x 1050(CG223W) / 1920 x 1200(CG243W) , all 
pixels are illuminated as a full screen (1:1).
sRGB	(Standard RGB)
"International Standard for Red, Green, and Blue color space" A color space was defined with the aim of 
the color matching between applications and hardware devices, such as monitors, scanners, printers and 
digital cameras. As a standard default space, sRGB allows Internet users to closely match colors.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. 
The screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame 
temperature.
5000K: Slightly reddish white (usually used in print industry)
6500K: White called daylight color (suited for web browsing)
9300K: Slightly bluish white (usually used for television)
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPM (Video Electronics Standards Association - Display Power Management )
VESA specifications achieve increased energy efficiency for computer monitors. This involves 
standardization of signals sent from the computer (graphics board). DPM defines the status of signals 
transmitted between the computer and monitor.
  
						

							48Chapter 6  Reference
6-7. Preset Timing
The following table shows factory preset video timing (for analog signal only).
Attention
• Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu.
•
 
I
 f a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, 
screen display may still be incorrect even after the adjustment.
•
 
W
 hen interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the 
Adjustment menu. 
Resolution Applicable 
signal Frequency
PolarityCG223W CG243WDot clock 
: MHz Horizontal 
: kHz Vertical 
: Hz Horizontal Vertical
640 × 480 VGA 25.18 31.47 59.94
Negative Negative√ √
720 × 400 VGA TEXT 28.32 31.47 70.09
Negative Positive√ √
800 × 600 VESA 40.00 37.88 60.32
Positive Positive√ √
1024 × 768 VESA 65.00 48.36 60.00
Negative Negative√ √
1024 × 768 VESA 75.00 56.48 70.07
Negative Negative√ ―
1024 × 768 VESA 78.75 60.02 75.03
Positive Positive√ ―
1024 × 768 VESA 94.50 68.68 85.00
Positive Positive√ ―
1152 × 864 VESA 108.00 67.50 75.00
Positive Positive√ ―
1280 × 960 VESA 108.00 60.00 60.00
Positive Positive√ √
1280 × 1024  VESA 108.00 63.98 60.02
Positive Positive√ √
1600 × 1200  VESA 161.99 75.00 60.00
Positive Positive― √
1680 × 1050 VESA CVT 146.25 65.29 59.95
Negative Positive√ √
1680 × 1050 VESA CVT 
RB 119.00 64.67 59.88
Positive Negative√
―
1920× 1200 VESA CVT 
RB 154.00 74.04 59.95
Positive Negative―
√
  
						

							49 
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This 
means that your display is designed, manufactured and tested according to 
some of the strictest quality and environmental requirements in the world. 
This makes for a high performance product, designed with the user in focus 
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements: Ergonomics●
 Good visual er

gonomics and image quality in order to improve the working environment for the user 
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, 
reflectance, colour rendition and image stability.
Energy ●
 Ener

gy-saving mode after a certain time - beneficial both for the user and environment
●
 Ele

ctrical safety
Emissions ●
 Ele

ctromagnetic fields
●
 Noise emissions
E

cology
●
 The products must be prepared

 for recycling and the manufacturer must have a certified environmental 
management system such as EMAS or ISO 14000
●
 Restrictions on ●
 chlorinated and brominated flame retardants and polymers
●
 heavy metals such as cadmium, mercury and lead.
The 

requirements includes in this label have been developed by TCO Development in co-operation with scientists, 
experts, users as well as manufacturers all over the world. Since the end of the 1980s  TCO has been involved in 
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays 
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit www.tcodevelopment.com
About TCO’ 03
  
						

							50 
For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of Conformity
We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone:  (562) 431-5011
declare that the product Trade name:  EIZO
Model:  ColorEdge CG223W / CG243W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference 
in a residential installation.  This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures.
*
 
R
 eorient or relocate the receiving antenna.
*
 
I
 ncrease the separation between the equipment and receiver.
*
 
C
 onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*
 
C
 onsult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the 
limits of a Class B digital device.
-
 
A
 C Cord
-
 
S
 hielded Signal Cable (Enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
FCC Declaration of Conformity