Eiki Projector LC-XNS3100 User Manual

							41
Setting
Key lock
This function allows you to use the Key lock 
and PIN code lock function to set the security 
for the projector operation.
Select "Key lock" and press OK button, 
then press  button to select the item you 
desire . 
 Of f ......................Unlock.
 Projector  ...........  Lo c k  t he  o p e r at i o n                            
of the.top control.  
To unlock, use the  
remote control. 
 Remote Control ..  Lock the operation 
of the remote 
control. 
To unlock, use the 
top control.     
If the top control accidentally becomes locked 
and you do not have the remote control 
nearby or there is something wrong with your 
remote control, contact the dealer where you 
purchased the projector or the service center. Key lock
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                     
                      

Closed Caption
Allows the subtitle to be displayed for the 
audio contents or other information. If the input 
source contains closed caption, you can enable 
this function and change the channel. Press 
 
to select OFF, CC1, CC2, CC3 or CC4.
 Note:
   - The icon of Closed Caption is displayed in 
     grey when it is disable.
   - Closed caption is disable when screen menu    
     or Timer displayed on screen. Closed Caption
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                      
Off
CC1
CC2
CC3
CC4  
						

							42
Sound
Iris
Terminal
This function is used to increase the contrast 
of the image.
  On....Enable Iris function, increase the 
           contrast of the image.
  Off....Disable Iris function.
The VGA IN 2/ VGA OUT terminal can be used 
as computer input or monitor output.Press 
▲  to select input or output.
   VGA IN 2  ....... VGA 2 input
   VGA OUT..........Monitor out
This item is used to adjust the volume.
   Sound...Press
 
  
button to increase the 
                 volume, press  
  
button to 
                 decresce the volume. 
   Mute.....Press OK button to switch mute 
                 function.(On/Off) SoundIris
Terminal
PC adjust Display
Color adjust
Setting
Expand
Info.
Move Next Exit
On Start                    Off
Standby Mode                Normal
High Land                   Off
Lamp Control
Cooling Fast                Normal
Closed caption              Off
Key Lock   
Iris                        Off
Terminal                    VGA OUT
Sound                       
    Volume   12
    Mute     Off
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                     
                      
Off
On
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust  Select   Back
On start                  Off
Standby mode              Normal
High land                 Off
Lamp control
Cooling fast              Normal
Closed caption            Off
Key lock   
Iris                      Off
Terminal                  Monitor out
Sound                      
VGA IN 2
VGA OUT
Setting  
						

							43
Auto setup
Language
Expand
The projector has Expand menu that allows you to set the other various expand functions 
described as follows.Expand menu
Auto setup
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Language
Auto setup
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
                Auto setup
Input search               On
Auto PC adj.               On
Auto keystone              Auto
Press
  button to select the language for 
screen manual.
This projector provides 20 lanuages below:
English, Persian, Russian, Finnish, Dutch, 
Italian, Portuguese, French, German, Thai, 
Vietnamese, Japanese, Korean, Spanish, 
Indonesian, Turkish, Arabic, Afrikaans, 
Traditional Chinese, Simplified Chinese.
Press AUTO button on the remote control 
to execute Input search and Auto PC adj. 
functions.
Input search
Allows you to automatically detect input 
signals. It stops when a signal is found. 
Press  
  button  to select an option 
below: 
Off........Disabled.
On........Enabled. This function is used to 
             detect input signals automatically 
             and stops when finding a signal .
Auto PC adj.
On........Press the AUTO button on the 
             remote control to enable Auto PC 
             adj. function automatically. 
Off........Cancel Auto PC adj. function.
Auto keystone
Off.........Disable auto keystone function.
Manual..  Press the AUTO button on the 
top control or remote control to
 
enable Auto keystone function.
Auto......  Correct keystone distortion
         
according to the slope of the 
projector. 
Note:
  -   Only the last selected input source can be 
detected.
  -   If the INPUT button on the top control or on the 
remote control is pressed during Input search is 
in  progress, Input search will stop and go back to 
the previous  input signal.
  -   Input Search and Auto PC Adj. cannot  be set Off 
at the same time.
  -   Fine sync., Total dots, Horizontal and Ver tical 
position of some computers cannot be fully 
adjusted with the Auto PC Adj. function. 
When the image is not  provided properly with this 
operation, manual adjustments are required.
1 Press MENU button on the remote control to  
   display screen menu. Press
 
  
button to 
   select Expand, then press OK button.
2 Press  
  button to select the item you 
    want to set, press OK button.
3  Press
 
  button to adjust the item, then 
    press OK button.  
						

							44
Logo
Expand
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code 
lock and Logo PIN code change functions.
Logo PIN code LockThis function prevents an unauthorized person from changing the screen logo.
  Off ......The screen logo can be changed freely from the Logo menu.
  On ......The screen logo cannot be changed without a Logo PIN code.
If you want to change the 
Logo PIN code lock setting, press OK button and the Logo PIN code dialog 
box appears. Enter a Logo PIN code by following the steps below.
Enter PIN code 
Press   button to select a number, and then press OK button to enter this number, automatically 
move the cursor to next box. If you fixed an incorrect number, press MENU button to reset it again.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, automatically move the cursor to “OK”, and press OK button, 
then you can start to operate the projector.
If you entered an incorrect PIN code, the “PIN code” and the number (***) turn red, it will be reset 
automatically within one second. Enter the correct PIN code all over aga\
in.
Logo PIN code change
Logo PIN code can be changed to your desired three-digit number. Press OK button to select Logo PIN 
code change. Logo Pin code dialog box appears, press ▲▼ button to enter the correct code. The New 
Logo  PIN  code  input  dialog  box  appears.  Set  a  new  Logo  PIN  code,  confirmation  box  appears,  select 
'Yes' to set the new Logo Pin code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no 
longer change the Logo PIN code setting.
Logo
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
                 Logo
Logo Select                Default
Capture
Logo PIN code lock         Off
Logo PIN code change
When you have changed the logo PIN code, write down the new PIN code in column of the logo PIN  
code no. memo on page 66, and keep it securely. Should the logo pin code be lost or forgotten, the 
logo pin code setting can no longer be changed.
 Caution:
Logo SelectThis function decides on the starting-up display 
from among following options.
  Default .... Show the factory-set logo.
  User..........Show the image captured by user.
  Of f ............Show the countdown display only.
Capture
You can capture a projected image as start 
logo or interval of presentation.
Select Capture and press OK button.
Confirmation dialog box appears, select "Yes" 
to start capturing. 
You can set Logo Select as "User" after 
capturing, then captured image will appear on 
sreen next time you start the projector.   
						

							45
Security
This function allows you to use the PIN code 
lock and PIN code change functions to set the 
security for the projector operation.
PIN code lock
This function prevents the projector from 
being operated by unauthorized persons 
and provides the following setting options for 
s e c u r i t y.
  Of f ............Unlocked.
   On ........... Enter the PIN code ever y time 
                     turning on the projector.If you 
                     want to change PIN code lock 
                     setting or PIN code,you must 
                     enter the PIN code. The orignal 
                     PIN code is "111".
       
If you want to change the PIN code lock 
setting, press OK button, then PIN code dialog 
box appears.
Enter PIN codePress   button to select a number, and 
then press OK button to enter this number, 
automatically move the cursor to next box.  If 
you fixed an incorrect number, press MENU 
button to reset it.
Repeat the steps to complete entering a three-
digit number.
After entering the three-digit number, move the 
cursor to “OK”, and press OK button, then you 
can start to operate the projector.
If you entered an incorrect PIN code, the “PIN 
code”  and  the  number  (***)  turn  red,  it  will  be 
reset automatically within one second. Enter 
the correct PIN code all over again.
Change PIN code lock settingPress   button to select On or Off, then 
press OK button.
PIN code changeThe PIN code can be changed to your desired 
three-digit number. Press   button to 
select PIN code change. Pin code dialog 
box appears, Press   button to enter the 
correct code. The New PIN code input dialog 
box appears. Set a new PIN code.When you have changed the pin code, write 
down the new pin code in column of the 
pin code no. memo on Page 66, and keep 
it securely. Should the pin code be lost or 
forgotten, the pin code setting can no longer 
be changed.
Security
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
               Security
PIN code lock              Off
PIN code change
Expand
  Caution:  
						

							46
Filter counter
Expand

Note:
   Factory default setting is 5 min.
This function is used to set a frequency for 
filter cleaning.
When the projector reached a specified time 
between cleanings, a Filter warning icon 
appears on the screen, notifying the cleaning 
is necessary. After cleaning the filter, be sure 
to select RESET and set the timer. The Filter 
warning icon will not turn off until the filter 
counter is reset. Filter counter.......The time that filter used.  
Timer...................Frequency for filter cleaning.
Filter counter reset..Reset the filter counter.
Power management
Power management
Filter counter
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
            Power management
  Ready
  Shut down
  Off
  Timer                    5 Min
  Ready countdown          0 Min
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
            Filter counter
Filter counter               0 H
Timer                      400 H
Filter counter reset
Power management
    No signal
  01 : 20
Time left before Lamp is off.
For reducing power consumption as well as maintaining the lamp life, the Power management 
function turns off the projection lamp when the projector is not operated for a certain period. Select 
one of the following options:
Ready ...................
  When the lamp has been fully cooled down, the POWER indicator changes 
to green blinking. In this condition, the projection lamp will be turned on if the 
input signal is reconnected or any button on the top control or remote control is 
pressed.
Shut down .............  When the lamp has been fully cooled down, the power will be turned off.
Off .........................  Power management function is off.
Timer .....................   If the input signal is interrupted and no button is pressed for more than 30 
seconds, the timer display with No signal appears. It starts the countdown until 
the lamp is turned off. Press 
 button to set the Timer(1~30min.)
Ready  countdown..  Set  the  time  that    automatically  from  ready  status  transfers  to  standby  status  (0-                               
30min). 0 Min: without automatically transfer.
                               In ready status, press POWER button to sw\
icth to standby status, and press 
                               any other button to turn on the projector\
.  
						

							47
Te s t  P a t t e r nExpand
This function is used to set the internal test 
signal:Gray scale 1,Gray scale 2,Gray scale 
3,Gray scale 4, Color bar, Red, Green, Blue, 
Cross hatch,White,Black and Gray.
NetworkTest PatternPC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Back
               Test Pattern
  Off
  Gray scale 1
  Gray scale 2
  Gray scale 3
  Gray scale 4
  Color bar
  Red
  Green
  Blue
  Cross hatch
Network
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
    Connect the projector to routers or switches of the LAN by parallel or cross cable. If it fails to  
    connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN inter face 
     will flash continuously.
Operation procedures:
1.Turn on the projector.
2.  Obtain network address. DHCP set is 
displayed as On and obtain network address 
automatically.(If familiar with network, you 
can set DHCP as Off and obtain network 
address manually.)
3.   Enter network settings menu.
(1)   Press MENU button on the remote 
control to display screen menu. Press 
  button to select Expand, then press 
OK button.
(2)   Press   button to select Network, 
and then press OK button to enter the 
newtork menu.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
                 Network
  Network setting
  Network information:
      MAC address:      000000000000
      IP address:       192.168.001.023    
						

							48
Expand
Factory default
This function returns all setting values except 
for the User logo, PIN code lock, Logo PIN 
code lock, Lamp counter and Filter counter to 
the factory default settings.
Network setting
DHCP                    Off
 SetCancel
IP address              0    0     0     0 
Subnet                  0    0     0     0  
Gateway                 0    0     0     0 
DNS                     0    0     0     0 
Move                                Select                               Back
Network setting
DHCP                     On
 SetCancel
IP address              
Subnet                  
Gateway                 
DNS                   
Adjust                           Select                               Back
(3)  
When DHCP is set On, IP address, 
Subnet, Gateway and DNS will be 
obtained automatically, press OK at 
"Set" to confirm the parameters. 
 
When DHCP is set Off, press OK button 
to enter IP address, then press OK 
button to enter Subnet, Gateway and 
DNS respectively, press OK at "Set" to 
confirm the parameters.  
						

							49
Infomation
The information menu is used to detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control to 
display the screen menu. Press  to select  
Info., then press OK button, the information 
menu will appear as the right picture.
The information below will display in 
information menu. Info. menu
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
Input                    VGA IN 1
                         1024x768@60
H-sync freq.             48.3   KHz
V-sync freq.             59.9   Hz
Lamp status
Lamp counter             16 H
Power management         Ready
                         5 Min
Image Mode               Normal                 
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is 
displayed in KHz or - - - -KHz when no signal.
V-sync freq .
The vertical frequency of the input signal is 
displayed in Hz or - - - - Hz when no signal. 
Lamp status
Display the lamp mode you select. Lamp counter
Display the time that lamp used.
Power management
Display the power management setting. 
Image mode
Display the selected image mode.  
						

							50
Network Control
Connecting to the LAN
Computer operation
Connect the LAN cable to the LAN terminal of 
the projector.1.Turn on the computer.
2.   Set the network parameters, refer to pages 
4 7.
3.   Set DHCP as Off to obtain IP address 
automatically.  LAN cable
Computer
Projector
Router LAN cable
Network setting
DHCP                    Off
 SetCancel
IP address              0    0     0     0 
Subnet                  0    0     0     0  
Gateway                 0    0     0     0 
DNS                     0    0     0     0 
Move                                Select                               Back
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move Next Exit
                 Network
  Network setting
  Network information:
      MAC address:      000000000000
      IP address:       192.168.001.023  
You can set and control the projector through network. 
IP address