Eiki Projector LC-XNS3100 User Manual

21
Turn off the projectorBasic operation
Power off ?
“Power off ? ” disappears after 4 seconds.
1.
 
Press the POWER button on top control 
or on the remote control, and “Power off?”     
appears on the screen.
2.   Then, press the POWER button again in 4 
seconds.  The  POWER  indicator  starts  to     
flash  red,  and  the  cooling  fans  keep  running      
(You can select the level of fans’ quietness     
and running speed.). Now you can unplug     
the AC power cord even if the fans are still...

22
How to operate the screen menu
Remote control
Screen menu Top control
MEMU
MENU
OK/INPUT 
OK 
  

 
1  
Press the MENU button on the top control or 
the remote control to display the screen menu.
2   Press 
 buttons to select an entry in the 
main menu and then press OK  button to enter 
the submenu.
3   Press
 buttons to select your required 
item, and then press OK button to set or enter 
required item.
4   Press 
 buttons to adjust settings or switch 
among the items. Press the OK...

23
Menu bar
① PC adjust
Adjust computer parameters to match with VGA input signal format:  Auto PC adj, Fine sync,  
Total dots, Horizontal, Vertical, Display area H, Display area V.
②  Display
-   Screen Size: select the projecting image screen size.  
If a computer is selected as a signal source, the following setup option\
s for the image size are         
available:  Normal, Wide, Custom. 
If video equipment is selected as a signal source, the following setup o\
ptions for the image 
size are...

24
Auto setup function
Adjust zoom and foucus
This function is available just by pressing the  
AUTO button on the remote control. The system 
then automatically performs various settings in 
the setup menu, including input source search 
and auto pc adjust. Rotate the zoom ring to zoom in or zoom out the 
image.
Rotate the focus ring to adjust the focus of the 
image.
Zoom ring
(back)
Remote control AUTO Focus ring
(front)
Basic operation  

25
VolumeRemote controlMUTE
VOLUME +/- 
Menu operation
Volume menu
Volume
Press  to increase the volume and  to 
decrease  the volume.
Mute
Press
 button to switch the mute function On/
Of f. 1 Press the MENU button to display the screen 
   menu.  Press 
 button to select the Setting 
   menu icon. Press OK to enter the submenu 
   e nt r y.
2 Press 
 button to select Volume and then 
    press OK button.
3 Press 
 button to select Volume or Mute to  
   adjust.
PC adjust
Display
Color adjust...

26
Remote control operation
INPUT 
Press INPUT button on the remote control to 
select the input source.
FREEZE 
Press FREEZE button to freeze the picture on 
the screen. To cancel the freeze function, press 
the FREEZE button again or press any other 
button.MUTE
Press MUTE button on the remote control to turn 
off the volume. Press MUTE button again or any 
other buttons to cancel mute function.
VOLUME +/-  
Press image VOLUME +/- button on the remote 
control to increase or decrease the volume.
INPUT...

27
D.ZOOM+ 
Press D.ZOOM+ button, the screen menu will 
disappear, while the information on digital zoom 
+ appears. You can press Select to zoom in the 
image size, and press  ▲▼ ◄ ► to move the image 
horizontally and vertically.
The moving is effective only when the image is 
larger than the size of the screen.
D. ZOOM-  
Press D.ZOOM- button, the screen menu will 
disappear, while the information on digital zoom - 
appears. Press OK button to zoom out the image 
size.
To exit the “digital zoom...

28
VGA IN 1
VGA IN 2
Input select
Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO or 
VIDEO button on the remote control to select 
HDMI, VGA IN, Component, S-video or Video 
as input source.When input source is from 
computer connected to VGA 
IN 1 terminal with VGA cable,  
please select VGA IN 1.When input source is from 
computer connected to VGA IN 
2/VGA OUT terminal with VGA 
cable, please select VGA IN 2.
 Note:
  -  When the Input Search function is set to On in the Auto setup function,...

29
Auto PC adj.
PC Adjust
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and 
Vertical to conform to your computer.
Store Menu operation
The system parameters adjusted in the Auto PC 
adj. can be stored in the projector.
√ Note:
  -  Total dots and horizontal & ver tical positions of some computers cannot be fully adjusted with 
this Auto PC adj. function. When the image is not provided properly with this function, manual 
adjustments are required.
  -...

30
PC Adjust
Some computers employ special signal formats which may not be tuned by Multi-scan system of this 
projector. Manual PC Adjustment is provided for you to precisely adjust several parameters to match 
those signal formats. The projector has five independent memory areas to store those parameters 
manually adjusted, which allows you to recall the setting for a specific computer.
1 Press MENU button on  the  remote control 
   to display screen menu. Press  button 
   to select PC adjust,then...