Eiki Projector Lc Xb33n User Manual

							
31

Computer InputComputer Input
The Auto PC Adjustment 
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
Selected system is displayed.
Systems in this dialog box 
can be selected.
PC System Menu
Customized Mode (1–5) set in 
the PC Adjust Menu (pp.33–34).
Computer System Selection
This projector automatically tunes to various types of computers based o\
n VGA, SVGA, XGA, SXGA, WXGA, 
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this 
projector automatically detects the signal format and tunes to project a\
 proper image without any additional 
settings. (Signal formats provided in this projector are shown on pages\
 69-70.)
One of the following messages may appear when:
The projector cannot recognize the connected 
signal conforming to the provided PC Systems. 
The “Auto” is displayed on the System Menu 
box and the Auto PC Adjustment function works 
to display proper images. If the image is not 
projected properly, a manual adjustment is 
required (pp.33-34).
There is no signal input from the computer. 
Check the connection between your computer 
and the projector. (See “Troubleshooting” on 
page 63.)
Auto
-----
The preset system is manually adjusted in the 
PC Adjust Menu. The adjusted data can be 
stored in Mode 1–5 (pp.33-34).
Mode 1
PC Systems provided in this projector is chosen.  
The projector chooses a proper system provided 
in the projector and displays it.  
SVGA 1
*Mode 1 and SVGA 1 are examples.  
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the PC System Menu icon.
Use the Point ▲▼ buttons to move the red arrow 
pointer to the desired system and then press the 
SELECT button.  
1

PC system can also be selected manually.
Selecting Computer System Manually 
						

							
3

Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 
positions to conform to your computer.
Move the red frame pointer 
to Auto PC Adj. and press 
the SELECT button.
“Please wait...” appears 
while the Auto PC 
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
Auto PC Adjustment
Remote Control
AUTO PC button
The Auto PC adjustment function can be operated directly 
by pressing the AUTO PC button on the remote control.
Direct Operation
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can 
be stored in the projector. Once the parameters are stored, 
the setting can be done just by selecting a Mode (1–5) in the 
PC System Menu (see page 31). See also “Store” on page 
34.
Notes:
  • Fine sync, Total dots, Horizontal and Vertical position of 
some computers cannot be fully adjusted with the Auto 
PC Adjustment function. When the image is not provided 
properly with this operation, manual adjustments are 
required (pp.33–34).
  • The Auto PC Adjustment cannot be operated when 480i, 
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the 
PC System Menu (p.31), or when the signal is coming 
from the DVI-terminal. 
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the PC Adjust Menu icon.
1
Use the Point ▲▼ buttons to move the red frame 
pointer to Auto PC Adj. and then press the SELECT 
button twice. Auto PC Adj .
Menu Operation
Computer Input 
						

							
33

Computer InputComputer Input
PC Adjust Menu
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this projector.  
Manual PC Adjustment enables you to precisely adjust several parameters to match t\
hose signal formats. The 
projector has five independent memory areas to store those parameters ma\
nually adjusted. It allows you to 
recall the setting for a specific computer. 
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄►  buttons to move the red 
frame pointer to the PC Adjust Menu icon.
1
Use the Point ▲▼ buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button to display the adjustment dialog box. Use the 
Point ◄► buttons to adjust the setting value.Move the red frame pointer 
to the desired item and press 
the SELECT button.
PC Adjust Menu icon
Press the SELECT button 
here to adjust other items. 
Use the Point ◄► buttons 
to adjust the value.
Status (Stored/Free) of the 
selected Mode.
Selected Mode
Press the SELECT button at 
Current mode to show the 
information of the connected 
computer.
Use the Point ◄► buttons to adjust the value, eliminating a 
flicker from the image displayed (from 0 to 31).
Fine sync
Use the Point ◄► buttons to adjust the number of total dots 
in one horizontal period to match your PC image.
Total dots
Use the Point ◄► buttons to adjust the horizontal picture 
position.
Horizontal
Use the Point ◄► buttons to adjust the vertical picture 
position.
Vertical
Press the SELECT button to show H-sync freq. and V-sync 
freq. of the connected computer. 
Current mode
Use the Point ◄► buttons to adjust the clamp level. When 
the image has dark bars, try this adjustment.
Clamp 
						

							
3

Computer Input
VacantValues of “Total dots”, 
“Horizontal”, “Vertical”, 
“Display area H”, and 
“Display area V”.
Close this dialog box.
To store adjusted data
To clear adjusted dataThis Mode has stored 
parameters.
Move the red frame pointer 
to the desired item and 
press the SELECT button.
Use the Point ◄► buttons to adjust the horizontal area 
displayed by this projector.
Display area H
Use the Point ◄► buttons to adjust the vertical area 
displayed by this projector.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select Store and then press the 
SELECT button. Move the red arrow pointer to one of the 
Modes 1 to 5 in which you want to store, and then press the 
SELECT button.
To reset the adjusted data, select Reset and press the 
SELECT button. A confirmation box appears and then select 
[Yes]. All adjustments will return to their previous figures.  
Mode free
To clear the stored data, select Mode free and then press 
the SELECT button. Move the red arrow pointer to the Mode 
that you want to clear and then press the SELECT button.
Notes:
  • Display area (H/V) cannot be selected when 480i, 575i, 
480p, 575p, 720p, 1035i, or 1080i is selected in the PC 
System Menu (p.31).
  • PC Adjust Menu cannot be selected when Computer 
1(Digital) is selected in the Input Menu (p.30).
Computer Input 
						

							
35

Computer InputComputer Input
Move the red frame pointer to 
the desired image mode and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Normal picture mode preset on the projector.
Standard
Picture mode with improved halftone for graphics.
Real
For the image projected on a blackboard. See above for 
further description.
Blackboard(Green)
Image Select Menu icon
IMAGE button
Dynamic
Real
Image 1
Image 
Image 3
Image Mode Selection 
Image 
For viewing with the user preset image mode in the Image 
Adjust Menu (see pages 36-37).Image 1~
Blackboard(Green)
For viewing pictures in a bright room.
Dynamic
Standard
Remote Control
IMAGE button
Select the desired image mode from among Dynamic, 
Standard, Real, Blackboard (Green), Image 1, Image 2, 
Image 3, and Image 4 by pressing the IMAGE button on the 
remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard (Green)
Image 1–
For the image projected on a blackboard.
This mode help enhance the image projected on a 
blackboard. This is mainly effective on a green colored board, 
not truly effective on a black colored board.
Dynamic
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the Image 
Adjust Menu (see pages 36-37). This Image memory is 
provided in each computer, component, and video input 
source.
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Image Select Menu icon.
1
Use the Point ▲▼ buttons to move the red frame 
pointer to the desired image mode and then press the 
SELECT button.
Menu Operation 
						

							
36

Computer Input
Use the Point ◄► buttons 
to adjust the setting value.
Move the red frame 
pointer to the desired 
item and then press 
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Selected Image mode
Image Adjustment
Reset
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Image Adjust Menu icon.
1
Use the Point ▲▼ buttons to move the red frame 
pointer to the desired item and then press the SELECT 
button to display the adjustment dialog box. Use the 
Point ◄► buttons to adjust the setting value.
Note:
  • When the White balance Red, Green, or 
Blue is adjusted, the Color temp. level will 
change to “Adj.”.
Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0 to 63).
Press  the  Point ◄  button  to  decrease  the  brightness;  press  
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point 
► button to deepen red tone (from 0 to 63). white balance (Red)
Press the Point ◄ button to lighten green tone; press the 
Point ► button to deepen green tone (from 0 to 63).
white balance (Green)
Press the Point ◄ button to lighten blue tone; press the 
Point ► button to deepen blue tone (from 0 to 63).
white balance (Blue)
Use the Point ◄► buttons to select the desired Color temp. 
level (High, Mid, Low, or XLow).  Color temp .
Use the Point ◄► buttons to adjust the gamma value to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press the Point ◄ button to decrease the sharpness of the 
image; press the Point ► button to increase the sharpness 
of the image (from 0 to 15).
Sharpness
To reset the adjusted data, select Reset and press the 
SELECT button. A confirmation box appears and then select 
[Yes]. All adjustments will return to their previous figures. 
Computer Input 
						

							
37

Computer InputComputer Input
Store
Exit the Image Adjust Menu.
Quit
Store icon
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original 
image size is larger than the screen size (1024 x 768), the 
projector enters to the panning mode automatically. Use the 
Point ▲▼◄►buttons to pan the image. When adjusted, the 
arrows will turn red. When reached to the correction limits, 
the arrows will disappear.
Full 
Provide the full screen image. 
Notes:
  •The Screen Menu, except for "Normal" 
and "Custom", cannot be operated when 
720p(HDTV), 1035i (HDTV), or 1080i 
(HDTV)  is selected in the PC System 
Menu (p.31).
  • This projector cannot display any 
resolution higher than 1600 x 1200. If 
your computer’s screen resolution is 
higher than it, reset the resolution to the 
lower before connecting to the projector.
  • The image data in other than 1024 x 768 
is modified to fit the screen size in initial 
mode.
  • True, Full, and Digital zoom +/– cannot 
be selected when 480i, 575i, 480p, or 
575p is selected in the PC System Menu 
(p.31).
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Screen Menu icon.
1
Use the Point ▲▼ buttons to move the red frame  
pointer to the desired function and then press the 
SELECT button.

To store the adjusted data, select Store and press the 
SELECT button. Use the Point ▲▼ buttons to select one 
from Image 1 to 4 and press the SELECT button. 
A confirmation box appears and then select [Yes]. Stored 
data can be called up by selecting an “Image (1–4)” in the 
Image Mode Selection on page 35.
Image Mode Menu
Move the red frame 
pointer to an image 
item to be set and 
then press the 
SELECT button.
A confirmation 
box appears 
and then select 
[Yes]
w ide
Provide the image to fit the wide video aspect ratio (16:9) by 
expanding the image width uniformly. This function can be 
used for providing a squeezed video signal at 16:9.
Move the red frame 
pointer to the function 
and press the 
SELECT button.
Screen Menu icon 
						

							
38

Computer Input
Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +” appears. Press the SELECT button to expand 
the image size. Use the Point ▲▼◄► buttons to pan the 
image. The Panning function can work only when the image 
is larger than the screen size.
A projected image can be also expanded by pressing the 
D.ZOOM ▲ button on the remote control. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM ▲▼ buttons, SELECT, and Point buttons.
Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and 
“D. zoom –” appears. Press the SELECT button to compress 
image size. 
The projected image can be also compressed by pressing the 
D.ZOOM ▼ button on the remote control.  
Digital zoom –
To return to the previous screen size, select a screen size 
from the Screen Size Adjustment Menu or select an input 
source from the Input Source Selection Menu (see pages 
29-30) again, or adjust the screen size with the D.ZOOM 
▲▼ buttons.
For zooming in and out the images
Notes:
  • The panning function may not operate 
properly if the stored Mode in the PC 
Adjust Menu is used (p.34).
  • The minimum compression ratio is limited 
depending on the input signal, when the 
Keystone function is working or when the 
custom is selected for the screen size. 
• True, Full, and Digital zoom +/– cannot 
be selected when 480i, 575i, 480p, or 
575p is selected in the PC System Menu 
(p.31).
  • Digital zoom +/- cannot be selected when 
Full or True is selected.
Remote Control 
D .ZOOM + button
POINT buttons
SELECT button
D .ZOOM - button
Adjust the screen scale and position manually with this 
function.
Press the SELECT button at Custom and the “Custom” is 
displayed on the screen for a few seconds and then the 
Aspect dialog box appears.
 Scale H/V  ..........  Adjust the Horizontal/Vertical screen scale.
  H&V  ...................  When set to “On,” the aspect ratio is 
fixed. The “Scale V” appears dimmed 
and becomes unavailable. Adjust “Scale 
H,” then the screen scale is automatically 
modified based on the aspect ratio. 
  Position H/V  .......  Adjust the Horizontal/Vertical screen 
position.
  Common  ............  Save the adjusted scale to all the inputs. 
Press the SELECT button at Common to 
display a confirmation box. To save the 
scale, press the SELECT button at “Yes.” 
When Custom is selected, the saved scale 
is used.
  Reset  .................  Reset the all adjusted values. Press 
the SELECT button at Reset to display 
a confirmation box. To reset, press the 
SELECT button at “Yes.”
Custom
Notes:  • When no signal is detected, “Normal” is set 
automatically and the Aspect dialog box disappears.
  • The adjustable range for Scale H/V and Position H/V is 
limited depending on the input signal.
Press the SELECT button at 
Common or Reset, to display a 
confirmation box.
Video Input 
						

							
39

Computer Input
Choose Video by pressing the INPUT button on the top 
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be 
selected through menu operation as described below.
Use the Point▲▼ buttons to move the red arrow 
pointer to Video and then press the SELECT button to 
display the Source Select Menu.
1

Move the pointer to 
Video and press the 
SELECT button.
VIDEO
Move the pointer to the source 
that you want to select and 
press the SELECT button.
Source Select Menu (VIDEO)
Input Menu
Move the pointer to the desired source and then press 
the SELECT button.3
Input Source Selection (Video, S-video)
Input Menu icon
Video Input
Computer 1 (Analog)
Video
Computer 
INPUT button
VIDEO button
wired
Top ControlINPUT button
Computer 1 (Digital)
Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Input Menu icon.
When selecting Auto, the projector automatically 
detects incoming video signal, and adjusts itself 
to optimize its performance. The projector selects 
connection in the following order:
1. S-video
2. Video 
Auto
When video input signal is connected to the 
VIDEO jack, select Video.Video
When video input signal is connected to the S-
VIDEO jack, select S-video.S-video
Notes:
  • Wired and Wireless are for the Network function. See 
the owner’s manual “Network Set-up and Operation” .
  • When the Input Search function is set to “On1” or “On2”, 
the input signal will be searched automatically (p.50).
  • When Monitor out is selected in the Terminal
    function (p.50), Computer 2 is not displayed.
wireless 
						

							
0

Video Input
Choose Computer 2 by pressing the INPUT button on the 
top control or press the COMPUTER button on the remote 
control.
Before using these buttons, correct input source should be 
selected through Menu operation as described below.
1
Computer 
Input Menu
Use the Point ▲▼ buttons to move the red arrow 
pointer to Computer 2 and then press the SELECT 
button.  

After the Source Select Menu appeared for Computer 
2, move the pointer to Component or RGB(Scart) and 
then press the SELECT button.
3
Input Source Selection (Component, RGB Scart 1-pin)
Move the pointer (red 
arrow) to Computer 2 
and press the SELECT 
button.
Input Menu icon
Move the pointer to 
Component or RGB(Scart) 
and press the SELECT 
button.
Source Select Menu
When the input source is coming from video 
equipment connected to the COMPUTER 
IN 2/COMPONENT IN terminal with a 
Component-VGA Cable, select Component. 
Component
When the input source is coming from video 
equipment connected to the COMPUTER 
IN 2/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart). 
RGB (Scart)
Computer 1 (Analog)
Video
Computer 
COMPUTER button
wired
INPUT button
Computer 1 (Digital)
Remote Control
Computer 1 (Analog)
Computer 
Computer 1 (Digital)
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the Input Menu icon.
Top Control
Note: 
  • Wired  and  Wireless  are  for  the  Network  function.  See owner’s manual “Network Set-up and Operation” .
  • When the Input Search function is set to “On1” or “On2”, 
the input signal will be searched automatically (p.50).
  • When Monitor out is selected in the Terminal
    function (p.50), Computer 2 is not displayed.
wireless
Video Input