Eiki Projector Lc Xb15 User Manual

							51
Appendix
0.8 TFT Active Matrix type, 3 panels
Multimedia Projector
6.2 lbs (2.8 kg)
11.73 x 2.8 x 8.58 (298mm x 71mm x 218mm) (not including raised portions)
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Adjustable from 40” to 300”
1 speaker, ø1.1 (28mm) 
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
Owner’s Manual
AC Power Cord
Remote Control and Batteries
DVI-VGA Cable
USB Cable 
Carrying Bag
Lens Cover
String for Lens Cover
Projector Type
Net Weight
Dimensions (W x H x D)
Panel Resolution
Number of Pixels
Color System
Scanning Frequency
Projection Image size (Diagonal)
Built-in Speaker
Operating Temperature
Storage Temperature
Accessories
LCD Panel System
The specifications are subject to change without notice.
F 1.7 ~ 2.5 lens with f 20.0 mm ~ 30.0 mm with manual zoom and focus
3.3’ ~ 25.3’ (1.0 m ~ 7.7 m)
200 W
RCA Type  x 1 (Video) and Mini DIN 4 pin x 1 (S-Video)
Projection Lens
Throw Distance
Projection Lamp
Video Input Jacks
RCA Type  x 2Audio Input Jacks
DVI-I Terminal (Digital/Analog) (HDCP compatible) 
Mini Jack (stereo)  x 1
Mini DIN 8 pin x 1
Mini Jack (stereo)  x 1 (variable with volume)
1.0 W RMS
Computer Input 1 Terminal
Computer / Component Audio Input Jack
Service Port Connector
Audio Output Jack
Internal Audio Amp
0˚ to 11.8˚Feet Adjustment
Power Source : AA, UM3 or R06 Type x 2
Operating Range : 16.4’ (5m) / ±30˚
Dimensions : 2.0” x 1.0” x 7.1” (50mm x 27mm x 181mm)
Net Weight : 0.34 lbs (154 g) (including batteries)
Laser Pointer : Class IILaser  (Max. Output : 1mW / Wave length : 640~660nm)
Remote Control
480i, 480p, 575i, 575p, 720p, 1035i, and 1080iHigh Definition TV Signal
USB Series B receptacle x 1USB Connector
AC 100 ~ 120 V (3.6 A  Max. Ampere), 50 / 60 Hz  (The U.S.A and Canada)
AC 200 ~ 240 V (1.8 A  Max. Ampere), 50 / 60 Hz  (Continental Europe)
Voltage and 
Power Consumption
Computer Input 2 / Component Input /
Monitor Output Terminal(VGA) HDB 15 Terminal x 1 (switch to use this terminal)
LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are effective,  a
tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. 
Technical Specifications
The On-Screen Menu and figures in this manual may differ slightly from the product.   
						

							52
Appendix
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN 
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync.
Ground (Vert.sync.)
DDC Data
Sense 0
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
Pin Configuration
1917
21018
31119
41220
51321
61422
71523
81624
C1
C2
C3
C5C4
Pin Configuration
Analog Red Input
Analog Ground (R/G/B)
Analog Green Input
Analog Horiz. sync
Analog Blue Input
C1
C5
C2
C4
C3
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5
2
4
3
6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
12
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
21
18
20
19
22
23
24
Configurations of Terminals
DVI-I TERMINAL (DIGITAL/ANALOG) 
Terminal : DVI-I 
						

							53
Terminal : Mini DIN 8-PIN
12
345876
Pin Configuration
SERVICE PORT CONNECTOR
-----
CLK
DATA
GND
-----
-----
GND
-----
R X D
-----
-----
GND
RTS / CTS
T X D
GND
GND
-----
ADB
-----
GND
-----
-----
-----
GND
PS/2SerialADB
1
2
3
4
5
6
7
8
Vcc
- Data
+ Data
Ground
1
2
3
4
USB CONNECTOR (Series B)
Pin Configuration
2
341
Appendix
The parts listed below are optionally supplied.  When ordering those parts, give the name and Type No. to the sales dealer.
Optional Parts
MAC Adapter Type No. : POA-MACAP
DVI Cable Type No. : KA-DV20
COMPONENT-VGA Cable Type No. : POA-CA-COMPVGA
SCART-VGA Cable Type No. : POA-CA-SCART
(This cable is used for RGB Scart 21-Pin
Video output of video equipment.)
Multi Card Director Type No. : MCD-100
Compact Flash Card Type No. : CA-10
Wired LAN Card Type No. : CA-20
Wireless LAN Card Type No. : CA-30
When using the Wired or Wireless LAN Card, set the following model name in the PJ Controller operation.
Model Name : 08-2-1 
						

							54
Appendix
Attaching the Lens Cover
When moving this projector or when it is not used for an extended
period, replace the lens cover.
Secure the string for the lens cover through a hole of the
lens cover.1
2Turn the projector upside down and secure the string for
lens cover to a hole on the bottom of the projector with a
screw.
Lens Cover 
String for the lens
cover
Secure it to the hole
with a screw.
Hole 
						

							Part No. 610 308 9058 (1AA6P1P4178-- MY3B)
Printed in Japan
© 2003 Eiki International, Inc.
A-key to better communications
U.S.A.
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200 
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Canada
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12 
65510 Idstein
Deutschland
Tel : 06126-9371-0 
Fax : 06126-9371-14
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7 
Czech Republic
Tel : +42 02 20570024
+42 02 20571413 
Fax : +42 02 20571411
E-Mail : [email protected]
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka, 
530-0028 Japan
Tel : +81-6-6311-9479 
Fax : +81-6-6311-8486
E-Mail : [email protected]
WorldWide Website  http://www.eiki.com
ˆ
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada 
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]